Please wait a minute...
J Mater Sci Technol  1999, Vol. 15 Issue (06): 563-566    DOI:
Research Articles Current Issue | Archive | Adv Search |
Laser and Fluorescence Properties of Organic Dye DCM Doped Sol-Gel-Derived Solid-State Materials
Qinyuan ZHANG, Zhonghong JIANG
Pohl Institute of Solid State Physics, Tongji University, Shanghai 200092, China; Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China
Download:  HTML  PDF(272KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Two kinds of new Ormosil xerogels derived from GPTMS (3-glycidyl propyl trimethoxisilane) and TEOS (tetraethoxysilane) or GPTMS and Ti(OBu)4 (tetrabutoxytitanate) were synthesized via the sol-gel method as dye laser host. Their optical properties, microstructure characteristics and surface laser damage thresholds have been reported. The effects of dye matrix combination on the fluorescence emission, slope efficiency, photostability and tunable bandwidth were examined. Laser oscillation was easily achieved near 620 nm with a slope efficiency of 29% from DCM doped SiO2-Ormosil pumped by a frequency-doubled radiation from a Q-switched Nd:YAG laser. The laser wavelength was tunable over 59nm, and the laser output energy had only a 10% reduction after 2.5×104 pulses at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm2.
Key words:       
Received:  23 November 1998     
Corresponding Authors:  Qinyuan ZHANG     E-mail:  9y-zhang@online.sh.cn

Cite this article: 

Qinyuan ZHANG, Zhonghong JIANG. Laser and Fluorescence Properties of Organic Dye DCM Doped Sol-Gel-Derived Solid-State Materials. J Mater Sci Technol, 1999, 15(06): 563-566.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y1999/V15/I06/563

[1] D.Avnir, D.Levy and R.Reisfeld: J. Phys. Chem.,1984, 88, 5956.
[2] F.Saln, G.Le Sanx, P.Georges and A.Brun: OpticsLetters, 1989, 785, 14.
[3] R.E.Hermes, T.H.Alik, S.Chandra and J.A.Hutchinson:Appl. Phy. Lett., 1993, 63, 877.
[4] A.Maslyukov, S.Soklov, M.Kaivola, K.Nyholm andS.Popov: Applied Optics, 1995, 34, 1516.
[5] E.T.Knobbe, B.Dunn, P.D.Fuqua and F.Nishida: Ap-plied Optics, 1990, 29, 2729.
[6] A.Dubois, M.Canva, A.Brun, F.Chaput andJ.P.Boilot: Applied Optics, 1996, 35, 3139.
[7] M.Faloss, M.Canva, P.Gerorges, A.Brun, F.Chaputand J.P.Boilot: Applied Optics, 1997, 36, 6760.
[8] M.Canva, P.Georges, J.F.Perelgritz, A.Brun,F.Chaput and J.P.Boilot: Applied Optics, 1995, 34,428.
[9] W.T.Hu, H.Ye, Z.H.Jiang and F.Z.Zhou: Applied Op-tics, 1997, 36, 5794.
[10] X.Li, T.A.King and F.Pallikari-Viras: J. Non-Cryst.Solids, 1994, 170, 243.
[11] L.L.Hu and Z.H.Jiang: Optics Communications, 1998,148, 275.
[12] M.D.Rahn and T.A.King: Appied Optics, 1995, 34,8260.(
[1] Zhao-Qi Zhang, Rong-Chang Zeng, Cun-Guo Lin, Li Wang, Xiao-Bo Chen, Dong-Chu Chen. Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31[J]. 材料科学与技术, 2020, 41(0): 43-55.
[2] Yanjin Lu, Xiongcheng Xu, Chunguang Yang, Ling Ren, Kai Luo, Ke Yang, Jinxin Lin. In vitro insights into the role of copper ions released from selective laser melted CoCrW-xCu alloys in the potential attenuation of inflammation and osteoclastogenesis[J]. 材料科学与技术, 2020, 41(0): 56-67.
[3] Jiajie Li, Xiangyun Huang, Liangliang Zeng, Bo Ouyang, Xiaoqiang Yu, Munan Yang, Bin Yang, Rawat Rajdeep Singh, Zhenchen Zhong. Tuning magnetic properties, thermal stability and microstructure of NdFeB magnets with diffusing Pr-Zn films[J]. 材料科学与技术, 2020, 41(0): 81-87.
[4] Pengfei Zhang, Yunchang Xin, Ling Zhang, Shiwei Pan, Qing Liu. On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling[J]. 材料科学与技术, 2020, 41(0): 98-104.
[5] C. Yang, J.F. Zhang, G.N. Ma, L.H. Wu, X.M. Zhang, G.Z. He, P. Xue, D.R. Ni, B.L. Xiao, K.S. Wang, Z.Y. Ma. Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates[J]. 材料科学与技术, 2020, 41(0): 105-116.
[6] Yanmei Zheng, Yuanyuan Liu, Xinli Guo, Zhongtao Chen, Weijie Zhang, Yixuan Wang, Xuan Tang, Yao Zhang, Yuhong Zhao. Sulfur-doped g-C3N4/rGO porous nanosheets for highly efficient photocatalytic degradation of refractory contaminants[J]. 材料科学与技术, 2020, 41(0): 117-126.
[7] Miao Cao, Qi Zhang, Ke Huang, Xinjian Wang, Botao Chang, Lei Cai. Microstructural evolution and deformation behavior of copper alloy during rheoforging process[J]. 材料科学与技术, 2020, 42(0): 17-27.
[8] Qiang Lu, Kai Li, Haonan Chen, Mingjun Yang, Xinyue Lan, Tong Yang, Shuhong Liu, Min Song, Lingfei Cao, Yong Du. Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium[J]. 材料科学与技术, 2020, 41(0): 139-148.
[9] Ze-Tian Liu, Bing-Yu Wang, Cheng Wang, Min Zha, Guo-Jun Liu, Zhi-Zheng Yang, Jin-Guo Wang, Jie-Hua Li, Hui-Yuan Wang. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification[J]. 材料科学与技术, 2020, 41(0): 178-186.
[10] Edson Cezar Grzebielucka, João Frederico Haas Leandro Monteiro, Eder Carlos Ferreira de Souza, Christiane Philippini Ferreira Borges, André Vitor Chaves de Andrade, Eloísa Cordoncillo, Héctor Beltrán-Mir, Sandra Regina Masetto Antunes. Improvement in varistor properties of CaCu3Ti4O12 ceramics by chromium addition[J]. 材料科学与技术, 2020, 41(0): 12-20.
[11] Emese Lantos, László Mérai, Ágota Deák, Juan Gómez-Pérez, Dániel Sebők, Imre Dékány, Zoltán Kónya, László Janovák. Preparation of sulfur hydrophobized plasmonic photocatalyst towards durable superhydrophobic coating material[J]. 材料科学与技术, 2020, 41(0): 159-167.
[12] Wei Xu, Xin Lu, Jingjing Tian, Chao Huang, Miao Chen, Yu Yan, Luning Wang, Xuanhui Qu, Cuie Wen. Microstructure, wear resistance, and corrosion performance of Ti35Zr28Nb alloy fabricated by powder metallurgy for orthopedic applications[J]. 材料科学与技术, 2020, 41(0): 191-198.
[13] Bassem Barkia, Pascal Aubry, Paul Haghi-Ashtiani, Thierry Auger, Lionel Gosmain, Frédéric Schuster, Hicham Maskrot. On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation[J]. 材料科学与技术, 2020, 41(0): 209-218.
[14] Yang Huijun, Liu Yong, Zhang Teng, Wang Hengpeng, Tang Bin, Qiao Junwei. Dry Sliding Tribological Properties of a Dendrite-reinforced Zr-based Bulk Metallic Glass Matrix Composite[J]. J. Mater. Sci. Technol., 2014, 30(6): 576-583.
[15] Bin Gan, Jeffrey M. Wheeler, Zhongnan Bi, Lin Liu, Jun Zhang, Hengzhi Fu. Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure[J]. 材料科学与技术, 2019, 35(6): 957-961.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.