Please wait a minute...
J Mater Sci Technol  1999, Vol. 15 Issue (06): 559-562    DOI:
Research Articles Current Issue | Archive | Adv Search |
Corrosion Inhibition of Carbon Steel in Hot Hydrochloric Acid Solutions
T.Y.Soror, H.A.El Dahan, N.G.El Sayed Ammer
Chemistry Department, Faculty of Science, Cairo University, Cairo, Egypt...
Download:  HTML  PDF(296KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The dissolution of carbon steel in 5% HCl in the temperature range of 30-90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behavior of these inhibitors in acidic medium was investigated using weight loss method, open circuit potential and linear polarization technique. These inhibitors provided satisfactory corrosion inhibition for carbon steel in hydrochloric acid solutions even at higher temperature and acid concentration (10%). The electrochemical results showed that the polarization resistance (Rp) values increased with increasing inhibitor concentration, also the corrosion current decreased and a higher inhibition efficiency was obtained. The protective properties of these two organic inhibitors were attributed to the chemisorption mechanism.
Key words:       
Received:  15 March 1999     
Corresponding Authors:  T.Y.Soror     E-mail:  tamersoror@hotmail.com

Cite this article: 

T.Y.Soror, H.A.El Dahan, N.G.El Sayed Ammer. Corrosion Inhibition of Carbon Steel in Hot Hydrochloric Acid Solutions. J Mater Sci Technol, 1999, 15(06): 559-562.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y1999/V15/I06/559

[1] B.Heeg, T.Maros and D.Klenerman: Corros. Sci.,1998, 40(8), 1303
[2] B.Heeg and D.Klenerman: Corros. Sci., 1998, 40(8),1313.
[3] G.V.Vasilenko, G.P.Sutotskii and A.S.Smirnova:Elektr. Stn., NPO TSK Tl, 1996, 2, 51. (in Russian)
[4] T.Maekawa, K.Fukumura, Y.Fukumura, H.Hayashi,and Oka, Akinori: Jpn. Kokai Tokky Koho Jp 07,41, 96610, Feb., 1995, 186, 408 28 Jul., 1993, 5.
[5] M.Ito and K.Takagi: Jpn. Kokai Tokky Koho JP 07,118, 881 (1995), 09 May (1995), 266, 984, 1993, 4.
[6] K.Y.Chang and S.Patel: Mater. Perform., FMCCorp., Princeton, NJ 08543 USA, 1996, 35(7), 48.
[7] M.Muller: Industrie Feuerung, ERC Emissions-Reduzierung- Concepte Gmbh, Norderstedt, Germany,1995, 61, 50.
[8] M.Taguchi, H.Sasaki and Ken-ichi Ogiyama: BoriaKenkyu, Kawasaki Jukogyo K.K., 1994, 266, 61. (inJapanese)
[9] B.Sathianandhan, K.Balahrishnan and N.Subramyar:Br. Corros. J., 1970, 5, 270.
[10] F.Zucchi, G.Trabanelli and G.Brunoro: Corros. Sci.,1992, 33, 1135.
[11] J.Uhrea and K.Aramaki: J. Electrochem. Soc., 1991,138, 3245.
[12] J.O'M Bockris and B.Yang: J.Electrochem. Soc.,1991, 138, 2237.
[13] G.Banerjee and S.N.Malhatra: Corrosion, 1992, 48,10.
[14] S.Kertit, A.Elkhely, J.Aride, A.Srhiri, A.Ben-Bachirand M-Etman: J. Appl. Electrochem., 1989, 19, 83.
[15] A.Frignani, M.Tassinari, L.Meszaros andG.Trabanelli: Corr. Sci., 1991, 32, 903.
[16] B.B.Paty: Indian J. Tech., 1991, 29, 595.
[17] B.V.Savithiri and S.M.Moyanna: Bull. Electrochem.,1988, 4, 875.
[18] R.J.Meakins: Br. Corr. J, 1971, 6, 109 and 111.
[19] A.M.A.Omar: Ph.D.Thesis, Faculty of Science, AinShams University, Cairo, Egypt, 1994.v[20] I.L.Rozenfeld: Corrosion inhibitors, McGraw Hill Inc.,New York, 1981, 109.
[21] S.P.Miskidizh'yan: Protection of Metals, 1970, 6(6),700. (in Russian)
[22] Y.C.Wu, P.Zhang, H.W.Pickering and D.L.Allara: J.Electrochem. Soc., 1993, 140, 2791.
[1] Zhao-Qi Zhang, Rong-Chang Zeng, Cun-Guo Lin, Li Wang, Xiao-Bo Chen, Dong-Chu Chen. Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31[J]. 材料科学与技术, 2020, 41(0): 43-55.
[2] Yanjin Lu, Xiongcheng Xu, Chunguang Yang, Ling Ren, Kai Luo, Ke Yang, Jinxin Lin. In vitro insights into the role of copper ions released from selective laser melted CoCrW-xCu alloys in the potential attenuation of inflammation and osteoclastogenesis[J]. 材料科学与技术, 2020, 41(0): 56-67.
[3] Jiajie Li, Xiangyun Huang, Liangliang Zeng, Bo Ouyang, Xiaoqiang Yu, Munan Yang, Bin Yang, Rawat Rajdeep Singh, Zhenchen Zhong. Tuning magnetic properties, thermal stability and microstructure of NdFeB magnets with diffusing Pr-Zn films[J]. 材料科学与技术, 2020, 41(0): 81-87.
[4] Pengfei Zhang, Yunchang Xin, Ling Zhang, Shiwei Pan, Qing Liu. On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling[J]. 材料科学与技术, 2020, 41(0): 98-104.
[5] C. Yang, J.F. Zhang, G.N. Ma, L.H. Wu, X.M. Zhang, G.Z. He, P. Xue, D.R. Ni, B.L. Xiao, K.S. Wang, Z.Y. Ma. Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates[J]. 材料科学与技术, 2020, 41(0): 105-116.
[6] Yanmei Zheng, Yuanyuan Liu, Xinli Guo, Zhongtao Chen, Weijie Zhang, Yixuan Wang, Xuan Tang, Yao Zhang, Yuhong Zhao. Sulfur-doped g-C3N4/rGO porous nanosheets for highly efficient photocatalytic degradation of refractory contaminants[J]. 材料科学与技术, 2020, 41(0): 117-126.
[7] Miao Cao, Qi Zhang, Ke Huang, Xinjian Wang, Botao Chang, Lei Cai. Microstructural evolution and deformation behavior of copper alloy during rheoforging process[J]. 材料科学与技术, 2020, 42(0): 17-27.
[8] Qiang Lu, Kai Li, Haonan Chen, Mingjun Yang, Xinyue Lan, Tong Yang, Shuhong Liu, Min Song, Lingfei Cao, Yong Du. Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium[J]. 材料科学与技术, 2020, 41(0): 139-148.
[9] Ze-Tian Liu, Bing-Yu Wang, Cheng Wang, Min Zha, Guo-Jun Liu, Zhi-Zheng Yang, Jin-Guo Wang, Jie-Hua Li, Hui-Yuan Wang. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification[J]. 材料科学与技术, 2020, 41(0): 178-186.
[10] Edson Cezar Grzebielucka, João Frederico Haas Leandro Monteiro, Eder Carlos Ferreira de Souza, Christiane Philippini Ferreira Borges, André Vitor Chaves de Andrade, Eloísa Cordoncillo, Héctor Beltrán-Mir, Sandra Regina Masetto Antunes. Improvement in varistor properties of CaCu3Ti4O12 ceramics by chromium addition[J]. 材料科学与技术, 2020, 41(0): 12-20.
[11] Emese Lantos, László Mérai, Ágota Deák, Juan Gómez-Pérez, Dániel Sebők, Imre Dékány, Zoltán Kónya, László Janovák. Preparation of sulfur hydrophobized plasmonic photocatalyst towards durable superhydrophobic coating material[J]. 材料科学与技术, 2020, 41(0): 159-167.
[12] Wei Xu, Xin Lu, Jingjing Tian, Chao Huang, Miao Chen, Yu Yan, Luning Wang, Xuanhui Qu, Cuie Wen. Microstructure, wear resistance, and corrosion performance of Ti35Zr28Nb alloy fabricated by powder metallurgy for orthopedic applications[J]. 材料科学与技术, 2020, 41(0): 191-198.
[13] Bassem Barkia, Pascal Aubry, Paul Haghi-Ashtiani, Thierry Auger, Lionel Gosmain, Frédéric Schuster, Hicham Maskrot. On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation[J]. 材料科学与技术, 2020, 41(0): 209-218.
[14] Yang Huijun, Liu Yong, Zhang Teng, Wang Hengpeng, Tang Bin, Qiao Junwei. Dry Sliding Tribological Properties of a Dendrite-reinforced Zr-based Bulk Metallic Glass Matrix Composite[J]. J. Mater. Sci. Technol., 2014, 30(6): 576-583.
[15] Bin Gan, Jeffrey M. Wheeler, Zhongnan Bi, Lin Liu, Jun Zhang, Hengzhi Fu. Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure[J]. 材料科学与技术, 2019, 35(6): 957-961.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.