Development and Characterization of Al2O3 Dispersed Al/Mg/Cu/Ti Matrix Composite

doi:10.1016/j.jmst.2013.07.004

Abstract

Abstract:

The effect of dispersion with different weight fractions of Al₂O₃ particles in metallic matrices (Al/Mg/Ti/Cu) fabricated by powder metallurgy was investigated. In the case of 15 wt% Al₂O₃ reinforced composites, peak hardness was attained which subsequently decreased with increasing the content of Al₂O₃. A correlation between the microhardness and nanomechanical properties at submicron scale was examined for all the composites. Specific strength and specific modulus were measured in order to figure out the performance of the composites.

Key words: Metal matrix composites, Powder metallurgy, Hardening, Coarsening, Hardness, Nanoindentation

Cite this article

Sumit Chabri, Subhranshu Chatterjee, Santanu Pattanayak, Himel Chakraborty,Nandagopal Bhowmik, Arijit Sinha. Development and Characterization of Al₂O₃ Dispersed Al/Mg/Cu/Ti Matrix Composite[J]. J. Mater. Sci. Technol., DOI: 10.1016/j.jmst.2013.07.004.

share this article

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.jmst.org/EN/10.1016/j.jmst.2013.07.004

https://www.jmst.org/EN/Y2013/V29/I11/1085

References

[1] J.P. Immarigeon, R.T. Holt, A.K. Koul, L. Zhao, W. Wallace,J.C. Beddoes, Mater. Charact. 35 (1995) 41-67.

[2] G.S. Cole, A.M. Sherman, Mater. Charact. 35 (1995) 3-9.

[3] T.W. Clyne, P.J. Withers, An Introduction to Metal Matrix Composites,first ed., Cambridge University Press, Cambridge, 1993.

[4] I.A. Ibrahim, F.A. Mohamed, E.J. Lavernia, J. Mater. Sci. 26 (1991)1137-1156.

[5] M.E. Smagorinski, P.G. Tsantrizos, S. Grenier, A. Cavasin,T. Brzezinski, G. Kim, Mater. Sci. Eng. A 244 (1998) 86-90.

[6] M.J. Tan, X. Zhang, Mater. Sci. Eng. A 244 (1998) 80-85.

[7] A. Slipenyuk, V. Kuprin, Yu. Milman, V. Goncharuk, J. Eckert,Acta Mater. 54 (2006) 157-166.

[8] I. Celikyurek, N.O. Korpe, T. Olcer, R. Gurler, J. Mater. Sci.Technol. 27 (2011) 937e943.

[9] S. Scudino, G. Liu, K.G. Prashanth, B. Bartusch, K.B. Surreddi,B.S. Murty, J. Eckert, Acta Mater. 57 (2009) 2029-2039.

[10] W.C. Oliver, G.M. Pharr, J. Mater. Res. 7 (1992) 1564-1583.

[11] N.K. Mukhopadhyay, P. Paufler, Int. Mater. Rev. 51 (2006)209-245.

[12] W.D. Nix, H. Gao, J. Mech. Phys. Solid 46 (1998) 411-425.

[13] J.W. Hutchinson, Int. J. Solids Struct. 37 (2000) 225-238.

[14] N.I. Tymiak, D.E. Kramer, D.F. Bahr, T.J.Wyrobek,W.W. Gerberich,Acta Mater. 49 (2001) 1021-1034.

[15] A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M.S. Khoshkhoo,B.K. Mishra, J. Eckert, J. Alloy. Compd. 536 (2012) 134-137.

[16] A. Upadhyaya, G.S. Upadhyaya, Mater. Des. 16 (1995) 41-45.

[17] M.F. Zawrah, H.A. Zayed, R.A. Essawy, A.H. Nassar, M.A. Taha,Mater. Des. 46 (2013) 485-490.

Related Articles 15

[1]	Jincheng Wang, Yujing Liu, Chirag Dhirajlal Rabadia, Shun-Xing Liang, Timothy Barry Sercombe, Lai-Chang Zhang. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture [J]. J. Mater. Sci. Technol., 2021, 61(0): 221-233.
[2]	Quan-xin Shi, Cui-ju Wang, Kun-kun Deng, Kai-bo Nie, Yucheng Wu, Wei-min Gan, Wei Liang. Microstructure and mechanical behavior of Mg-5Zn matrix influenced by particle deformation zone [J]. J. Mater. Sci. Technol., 2021, 60(0): 8-20.
[3]	Yang Wang, Shun Zhang, Ruizhi Wu, Nodir Turakhodjaev, Legan Hou, Jinghuai Zhang, Sergey Betsofen. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 197-203.
[4]	Y.Z. Chen, X.Y. Ma, W.X. Zhang, H. Dong, G.B. Shan, Y.B. Cong, C. Li, C.L. Yang, F. Liu. Effects of dealloying and heat treatment parameters on microstructures of nanoporous Pd [J]. J. Mater. Sci. Technol., 2020, 48(0): 123-129.
[5]	Yuan Zhong, Leifeng Liu, Ji Zou, Xiaodong Li, Daqing Cui, Zhijian Shen. Oxide dispersion strengthened stainless steel 316L with superior strength and ductility by selective laser melting [J]. J. Mater. Sci. Technol., 2020, 42(0): 97-105.
[6]	Kaustubh Bawane, Kathy Lu. Microstructure evolution of nanostructured ferritic alloy with and without Cr₃C₂ coated SiC at high temperatures [J]. J. Mater. Sci. Technol., 2020, 43(0): 126-134.
[7]	P.G. Kubendran Amos, Ramanathan Perumal, Michael Selzer, Britta Nestler. Multiphase-field modelling of concurrent grain growth and coarsening in complex multicomponent systems [J]. J. Mater. Sci. Technol., 2020, 45(0): 215-229.
[8]	P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion [J]. J. Mater. Sci. Technol., 2020, 45(0): 98-107.
[9]	G.Y. Li, L.F. Cao, J.Y. Zhang, X.G. Li, Y.Q. Wang, K. Wu, G. Liu, J. Sun. An insight into Mg alloying effects on Cu thin films: microstructural evolution and mechanical behavior [J]. J. Mater. Sci. Technol., 2020, 57(0): 101-112.
[10]	Y.H. Gao, L.F. Cao, J. Kuang, J.Y. Zhang, G. Liu, J. Sun. Dual effect of Cu on the Al₃Sc nanoprecipitate coarsening [J]. J. Mater. Sci. Technol., 2020, 37(0): 38-45.
[11]	Dongjun Wang, Hao Li, Wei Zheng. Oxidation behaviors of TA15 titanium alloy and TiBw reinforced TA15 matrix composites prepared by spark plasma sintering [J]. J. Mater. Sci. Technol., 2020, 37(0): 46-54.
[12]	Longjun Wu, Zhengwang Zhu, Dingming Liu, Huameng Fu, Hong Li, Aimin Wang, Hongwei Zhang, Zhengkun Li, Long Zhang, Haifeng Zhang. Deformation behavior of a TiZr-based metallic glass composite containing dendrites in the supercooled liquid region [J]. J. Mater. Sci. Technol., 2020, 37(0): 64-70.
[13]	C. Garcia-Cabezon, C. Garcia-Hernandez, M.L. Rodriguez-Mendez, F. Martin-Pedrosa. A new strategy for corrosion protection of porous stainless steel using polypyrrole films [J]. J. Mater. Sci. Technol., 2020, 37(0): 85-95.
[14]	Qiuyan Huang, Yang Liu, Aiyue Zhang, Haoxin Jiang, Hucheng Pan, Xiaohui Feng, Changlin Yang, Tianjiao Luo, Yingju Li, Yuansheng Yang. Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration [J]. J. Mater. Sci. Technol., 2020, 38(0): 39-46.
[15]	Przemysł Kot; aw, BaczmańAndrzej ski, GadalińElż ska; bieta, WrońSebastian ski, WrońMarcin ski, WróMirosł bel; aw, Gizo Bokuchava, ScheffzüChristian k, Krzysztof Wierzbanowski. Evolution of phase stresses in Al/SiC_p composite during thermal cycling and compression test studied using diffraction and self-consistent models [J]. J. Mater. Sci. Technol., 2020, 36(0): 176-189.

Metrics

Viewed

Full text

Abstract

Comments

Abstract
References
Related Articles
Recommended Articles
Metrics
Comments

TOP

Development and Characterization of Al₂O₃ Dispersed Al/Mg/Cu/Ti Matrix Composite

RichHTML

Knowledge