Effect of Phosphorus on Mechanical Properties and Thermal Stability of Fine-grained GH761 Alloy

Abstract

Abstract: The effect of phosphorus on mechanical properties and thermal stability of fine-grained GH761 alloy has been investigated. The results show that, when the content of phosphorus is in the range of 0.0007%-0.040%, there are no significant effects on the tensile properties. Phosphorus strongly affects the stress rupture life. The content of 0.023% P results in the longest life in this experiment. Compared with that of the alloy with 0.0007% P, the life is increased more than 2 times in the alloy with 0.023% P. After ageing at 700°C for 1000 h, the life reduced to some extent. However, phosphorus exhibits the similar effect on the life as before ageing. The tensile properties of the alloy are not influenced by long term ageing obviously. The present results suggested that the optimum content of phosphorus is 0.023%. The phosphorus with this content can optimize the precipitates at the grain boundaries and prevent the excessive growth of the precipitates. The combining mechanical properties of GH761 alloy can be largely improved by phosphorus addition combined with grain refinement.

Key words: Phosphorus, Fine-grained, Mechanical properties, Ageing, Grain boundaries

Shulin Yang, Wenru Sun, Jianxi Wang, Zhimei Ge, Shouren Guo, Zhuangqi Hu. Effect of Phosphorus on Mechanical Properties and Thermal Stability of Fine-grained GH761 Alloy[J]. J Mater Sci Technol, 2011, 27(6): 539-545.

References

[1 ] W.D. Cao and R.L. Kennedy: The Effect of Phosphorus on Mechanical Properties of Alloy 718, in Superalloys 718, 625, 706 and Various Derivatives, ed E.A. Loria, TMS, Warrendale, PA, 1994, 463.

[2 ] W.R. Sun: E®ect of P, S and Si on the Solidification, Segregation, Microstructure and Mechanical Properties in IN718 and GH761 Alloy, Ph.D. Thesis, Institute of Metal Research, Chinese Academy of Sciences, 1996. (in Chinese)

[3 ] H.W. Song: Mechanism of E®ect of P on the Microstructure and Mechanical Properties in IN718 Alloy, Ph.D. Thesis, Institute of Metal Research, Chinese Academy of Sciences, 1999. (in Chinese)

[4 ] S.R. Guo, W.R. Sun, D.Z. Lu and Z.Q. Hu: Effect of Minor Trace Elements on Microstructure and Mechanical Properties of IN718 Alloy, in Superalloys 718, 625, 706 and Various Derivatives, ed E.A. Loria, TMS, Warrendale, PA, 1997, 521.

[5 ] W.R. Sun, S.R. Guo and Z.Q Hu: Mater. Sci. Eng. A, 1998, 247, 173.

[6 ] H.W. Song, S.R. Guo and Z.Q. Hu: Acta Metall. Sin., 1999, 35, 387. (in Chinese)

[7 ] H.W. Song, S.R. Guo, D.Z. Lu, Y. Xu, Y.L. Wang, and Z.Q. Hu: Mater. Eng., 1999, 8, 3. (in Chinese)

[8 ] H.W. Song, S.R. Guo, D.Z. Lu, Y. Xu, Y.L. Wang, and Z.Q. Hu: J. Chin. Nonferrous Met., 2000, 10, 301. (in Chinese)

[9 ] Z.Q. Hu, W.R. Sun, S.R. Guo and D.Z. Lu: J. Chin. Nonferous Met., 2001, 11, 947. (in Chinese)

[10] W.D. Cao and R.L. Kennedy: Improving Stress Rupture Life of Alloy 718 by Ooptimizing Al, Ti, P and B Contents, in Superalloys 718, 625, 706 and Various Derivatives, ed E.A. Loria, TMS, Warrendale, PA, 2001, 477.

[11] Z.Q. Hu, H.W. Song, S.R. Guo and W.R. Sun: J. Mater. Sci. Technol., 2001, 17, 399.

[12] W.D. Cao and R.L. Kennedy: Role of Chemistry in 718-type Alloys-Allvac R° 718PlusTM Alloy Development, in Superalloys 2004, eds K.A.Green, T.M. Pollock and H. Harada TMS, Warrendale, PA, 2004, 91.

[13] Z.Q. Hu, W.R. Sun and S.R. Guo: Acta Metall. Sin. (Eng. Lett.), 1996, 9, 443.

[14] W.R. Sun: Effect of P, S and Si on the Solidi¯cation, Segregation and Mechanical Properties in GH761 alloy, Master Thesis, Institute of Metal Research, Chinese Academy of Sciences, 1993. (in Chinese)

[15] W.R. Sun, S.R. Guo, D.Z. Lu and Z.Q. Hu: Metall. Mater. Trans. A, 1997, 28, 649.

[16] S.L. Yang, W.R. Sun, S.R. Guo, Z.G. Wei, H.C. Yang and Z.Q. Hu: Acta Metall. Sin., 2005, 41, 1249. (in Chinese)

[17] W.R. Sun, S.R. Guo, X.N. Meng, N. Li and Z.Q. Hu: Acta Metall. Sin., 2004, 40, 477. (in Chinese)

[18] N. Li, S.R. Guo, D.Z. Lu, W.R. Sun, Y. Xu, X.N. Meng, and Z.Q. Hu: J. Iron Steel Res., 2003, 15(7), 58. (in Chinese)

[19] N. Li, S.R. Guo, D.Z. Lu, W.R. Sun, X.N. Meng, Z.Q. Hu: Acta Metall. Sin., 2003, 39, 1255. (in Chinese)

[20] S.L. Yang, W.R. Sun, S.R. Guo, Z.G. Wei, H.C. Yang and Z.Q. Hu: J. Aeronaut. Mater., 2006, 26(4), 1. (in Chinese)

[21] Y. Furuya, S. Matsuoka, S. Shimakura, T. Hanamura and S. Torizuka: Scripta Mater., 2005, 52, 1163.

[22] M.P. Seah: Acta Metall., 1980, 28, 955.

[1]	Lin Yuan, Jiangtao Xiong, Yajie Du, Jin Ren, Junmiao Shi, Jinglong Li. Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler [J]. J. Mater. Sci. Technol., 2021, 61(0): 176-185.
[2]	Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
[3]	Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw. Tensile deformation behavior and mechanical properties of a bulk cast Al_0.9CoFeNi₂ eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
[4]	Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen. NbMoTiVSi_x refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure [J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7.
[5]	Fu-Zhi Dai, Haiming Zhang, Huimin Xiang, Yanchun Zhou. Theoretical investigation on the stability, mechanical and thermal properties of the newly discovered MAB phase Cr₄AlB₄ [J]. J. Mater. Sci. Technol., 2020, 39(0): 161-166.
[6]	Bin Hu, Xin Tu, Haiwen Luo, Xinping Mao. Effect of warm rolling process on microstructures and tensile properties of 10￢ﾀﾉMn steel [J]. J. Mater. Sci. Technol., 2020, 47(0): 131-141.
[7]	Zheng Liu, Jieqiong Wang, Changhong Zhan, Jing Yu, Yang Cao, Jinchun Tu, Changsheng Shi. Phosphide-oxide honeycomb-like heterostructure CoP@CoMoO₄/CC for enhanced hydrogen evolution reaction in alkaline solution [J]. J. Mater. Sci. Technol., 2020, 46(0): 177-184.
[8]	Qi Wang, Wen Shi, Bo Zhu, Dang Sheng Su. An effective and green H₂O₂/H₂O/O₃ oxidation method for carbon nanotube to reinforce epoxy resin [J]. J. Mater. Sci. Technol., 2020, 40(0): 24-30.
[9]	Min Jung Kim, Gyeol Chan Kang, Sung Hwan Hong, Hae Jin Park, Sang Chul Mun, Gian Song, Ki Buem Kim. Understanding microstructure and mechanical properties of (AlTa_0.76)_xCoCrFeNi_2.1 eutectic high entropy alloys via thermo-physical parameters [J]. J. Mater. Sci. Technol., 2020, 57(0): 131-137.
[10]	Praveen Sreeramagiri, Ajay Bhagavatam, Abhishek Ramakrishnan, Husam Alrehaili, Guru Prasad Dinda. Design and development of a high-performance Ni-based superalloy WSU 150 for additive manufacturing [J]. J. Mater. Sci. Technol., 2020, 47(0): 20-28.
[11]	Guanyi Jing, Wenpu Huang, Huihui Yang, Zemin Wang. Microstructural evolution and mechanical properties of 300M steel produced by low and high power selective laser melting [J]. J. Mater. Sci. Technol., 2020, 48(0): 44-56.
[12]	Feng Zhong, Huajie Wu, Yunlei Jiao, Ruizhi Wu, Jinghuai Zhang, Legan Hou, Milin Zhang. Effect of Y and Ce on the microstructure, mechanical properties and anisotropy of as-rolled Mg-8Li-1Al alloy [J]. J. Mater. Sci. Technol., 2020, 39(0): 124-134.
[13]	C. Yang, J.F. Zhang, G.N. Ma, L.H. Wu, X.M. Zhang, G.Z. He, P. Xue, D.R. Ni, B.L. Xiao, K.S. Wang, Z.Y. Ma. Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates [J]. J. Mater. Sci. Technol., 2020, 41(0): 105-116.
[14]	Miao Cao, Qi Zhang, Ke Huang, Xinjian Wang, Botao Chang, Lei Cai. Microstructural evolution and deformation behavior of copper alloy during rheoforging process [J]. J. Mater. Sci. Technol., 2020, 42(0): 17-27.
[15]	Ze-Tian Liu, Bing-Yu Wang, Cheng Wang, Min Zha, Guo-Jun Liu, Zhi-Zheng Yang, Jin-Guo Wang, Jie-Hua Li, Hui-Yuan Wang. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification [J]. J. Mater. Sci. Technol., 2020, 41(0): 178-186.