[1] |
Daquan Liu, Yanxia Wang, Xue Jiang, Huijun Kang, Xiong Yang, Xiaoying Zhang, Tongmin Wang.
Ultrahigh electrical conductivities and low lattice thermal conductivities of La, Dy, and Nb Co-doped SrTiO3 thermoelectric materials with complex structures
[J]. J. Mater. Sci. Technol., 2020, 52(0): 172-179.
|
[2] |
Liuliu Han, Kun Li, Cheng Qian, Jingwen Qiu, Chengshang Zhou, Yong Liu.
Wear behavior of light-weight and high strength Fe-Mn-Ni-Al matrix self-lubricating steels
[J]. J. Mater. Sci. Technol., 2019, 35(4): 623-630.
|
[3] |
Liu Qing, Wang Guofeng, Sui Xiaochong, Liu Yongkang, Li Xiao, Yang Jianlei.
Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2600-2607.
|
[4] |
Zhao Ke, Cao Baobao, Liu Jinling, Wang Yiguang, An Linan.
In-situ synthesis of Al76.8Fe24 complex metallic alloy phase in Al-based hybrid composite
[J]. J. Mater. Sci. Technol., 2017, 33(10): 1177-1181.
|
[5] |
Tan Zhen,Wang Lu,Xue Yunfei,Cheng Xingwang,Zhang Long.
Structural Modification of Al65Cu16.5Ti18.5 Amorphous Powder through Annealing and Post Milling: Improving Thermal Stability
[J]. J. Mater. Sci. Technol., 2016, 32(12): 1326-1331.
|
[6] |
Hefei Huang, Chao Yang, Massey de los Reyes, Yongfeng Zhou, Long Yan, Xingtai Zhou.
Effect of Milling Time on the Microstructure and Tensile Properties of Ultrafine Grained Ni-SiC Composites at Room Temperature
[J]. J. Mater. Sci. Technol., 2015, 31(9): 923-929.
|
[7] |
Ram S. Maurya, Tapas Laha.
Effect of Rare Earth and Transition Metal Elements on the Glass Forming Ability of Mechanical Alloyed Al-TM-RE Based Amorphous Alloys
[J]. J. Mater. Sci. Technol., 2015, 31(11): 1118-1124.
|
[8] |
Bin Li, Guojun Zhang, Feng Jiang, Shuai Ren, Gang Liu, Jun Sun.
Characterization of Mo-Si-B Nanocomposite Powders Produced Using Mechanical Alloying and Powder Heat Treatment
[J]. J. Mater. Sci. Technol., 2015, 31(10): 995-1000.
|
[9] |
Baogang Yang, Songlin Li, Hang Wang, Jintao Xiang, Qiumin Yang.
Effect of MWCNTs Additive on Desorption Properties of Zn(BH4)2 Composite Prepared by Mechanical Alloying
[J]. J. Mater. Sci. Technol., 2013, 29(8): 715-719.
|
[10] |
Kahtan S. Mohammed, Azmi Rahmat, Khairel R. Ahmad.
Sintering Behavior and Microstructure Evolution of Mechanically Alloyed W-Bronze Composite Powders by Two-step Ball Milling Process
[J]. J. Mater. Sci. Technol., 2013, 29(1): 59-69.
|
[11] |
S.N. Hosseini, T. Mousavi, F. Karimzadehy and M.H. Enayati.
Thermodynamic Aspects of Nanostructured CoAl Intermetallic Compound during Mechanical Alloying
[J]. J Mater Sci Technol, 2011, 27(7): 601-606.
|
[12] |
Yuan Zewei,ZhuJi Jin,Xingwei Ma,Boxian Dong.
Fabrication and Characterization of FeNiCr Matrix-TiC Composite for Polishing CVD Diamond Film
[J]. J Mater Sci Technol, 2009, 25(03): 319-324.
|
[13] |
Xinguo ZHAO, Zhidong ZHANG, Qi YAO, Jinjun LIU, Weijun REN, Wei LIU, Dianyu GENG.
Phase Transformation and Magnetic Properties of Mechanically Alloyed PrCo5-based Magnets
[J]. J Mater Sci Technol, 2006, 22(06): 843-845.
|
[14] |
Renbo SONG, Yazheng LIU, Tatsuhiko AIZAWA.
Solid State Synthesis and Thermoelectric Properties of Mg-Si-Ge System
[J]. J Mater Sci Technol, 2005, 21(05): 618-622.
|
[15] |
Xunyong JIANG, Xueping GAO, Deying SONG.
Phase Development and Crystallization Kinetics of NiTi Prepared by Mechanical Alloying
[J]. J Mater Sci Technol, 2003, 19(06): 560-562.
|