Please wait a minute...
J Mater Sci Technol  2006, Vol. 22 Issue (02): 164-168    DOI:
Research Articles Current Issue | Archive | Adv Search |
Effect of Nb on the Microstructure and Mechanical Properties of Cast NiAl-Cr(Mo) Eutectic Alloy
Kaiwen HUAI, Jianting GUO, Zirong REN, Qiang GAO, Rui YANG
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; Department of Chemistry Engineering, Anshan University of Science and Technology, Anshan 114002, China
Download:  HTML  PDF(603KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The microstructure and mechanical behaviors of NiAl-28Cr-5Mo-1Nb eutectic alloy were investigated by using scanning electron microscopy, X-ray diffraction, transmission electron microscopy and compression tests, respectively. The alloy is mainly composed of three phases, which are the gray lamellar Cr(Mo) plate, black NiAl matrix and semicontinuously distributed Cr2Nb-type Laves phase. Through Nb addition, NiAl-Cr(Mo)/Nb alloy exhibits a reasonable balance of high temperature strength and room temperature compression ductility and its mechanical behaviors are superior to the NiAl-28Cr-6Mo eutectic alloy at all temperature. The elevated temperature compression deformation behavior of NiAl-Cr(Mo)/Nb alloy can be properly described by power-law equation.
Key words:  NiAl-28Cr-5Mo-1Nb      Microstructure      Nb(Cr1-x-yNixAly)2 phase      Mechanical properties...      
Received:  26 November 2004     
Corresponding Authors:  Jianting GUO     E-mail:  jtguo@imr.ac.cn

Cite this article: 

Kaiwen HUAI, Jianting GUO, Zirong REN, Qiang GAO, Rui YANG. Effect of Nb on the Microstructure and Mechanical Properties of Cast NiAl-Cr(Mo) Eutectic Alloy. J Mater Sci Technol, 2006, 22(02): 164-168.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y2006/V22/I02/164

[1]R.D.Noebe,R.R.Bowman and M.V.Nathal:Int. Mater.Rev.,1993,38,193.
[2]D.B.Miracle:Acta.Mater.,1993,41(3),649.
[3]D.R.Johnson,X.F.Chen,B.F.Oliver,R.D.Noebe and J.D.Whittenberger:Intermetallics.,1995,3,99.
[4]J.M.Yang,S.M.Jeng,K.Bain and R.A.Amato:Acta Mater.,1997,45(1),195.
[5]J.T.Guo:Ordered Intermetallic Compound NiAl Al- loy,Science Press,Beijing,2003.(in Chinese)
[6]J.T.Guo,C.Y.Cui,Y.H.Qi and H.Q.Ye:J.Alloy. Compd.,2002,343,142.
[7]K.Vedula,V.Pathare,I.Aslamidis and R.H.Titran: in High Temperature Ordered Intermetallics Alloys, Mater.Res.Soc.Symp.Proc,1985,39,411.
[8]C.T.Liu,J.A.Horton,E.H.Lee and E.P.George:Alloy- ing Effects on Mechanical and Metallugical Properties of NiAl,Oak Ridge,TN,June 1993.
[9]C.T.Liu and J.A.Horton:Mater.Sci.Eng.A,1995, 192/193,170.
[10]A.V.Keitz and G.Sauthoff:Intermetallics,2002,10, 497.
[11]R.Darolia,J.J.Lewansdowski,C.T.Liu,P.L.Martin, D.B.Miracle and M.V.Nathal:Structural Inter- metallics,TMS,Pennington,NJ,1993,P495.
[12]I.E.Locci,R.M.Dickerson,A.Grag,R.D.Noebe, J.D.Whittenberger,M.V.Nathal and R.Darolia:J. Mater.Res.,1996,11(12),3024.
[13]J.T.Guo,C.Y.Cui,Y.X.Chen,D.X.Li and H.Q.Ye:In- termetallics,2001,9(4),287.
[14]J.D.Whittenberger,R.D.Noebe,D.R.Johnson and B.F.Oliver:Intermetallics,1997,5,173.
[15]B.Zeumer:Ph.D.Thesis,Reihe 5:Groud und werk- stoffe,Nr.374,VDI,Verlay,Dusseldorf,1994.
[16]X.F.Chen,D.R.Hohnson and B.F.Pliver:Scripta Met- all.Mater.,1994,30,975.
[17]J.Zhou and J.T.Guo:Mater.Sci.Eng.A,2003,339, 166.
[18]C.Y.Cui,J.T.Guo,Y.H.Qi and H.Q.Ye:Metall. Trans.A,2003,34,2663.
[19]C.T.Liu,J.Yang and Z.Suo,A.G.Evans,R.Hecht and R.Mehrabian:Acta Mater.,1991,39,1883.
[20]R.S.Chen,J.T.Guo and J.Y.Zhou:Mater.Lett,2000, 42,75.
[21]D.T.Jiang and J.T.Guo:Mater.Sci.Eng.A,1998, 225,1154.
[1] L.W. Lan, X.J. Wang, R.P. Guo, H.J. Yang, J.W. Qiao. Effect of environments and normal loads on tribological properties of nitrided Ni45(FeCoCr)40(AlTi)15 high-entropy alloys[J]. 材料科学与技术, 2020, 42(0): 85-96.
[2] Lijin Dong, Cheng Ma, Qunjia Peng, En-Hou Han, Wei Ke. Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment[J]. 材料科学与技术, 2020, 40(0): 1-14.
[3] Wei Fu, Xiaoguo Song, Ruichen Tian, Yuzhen Lei, Weimin Long, Sujuan Zhong, Jicai Feng. Wettability and joining of SiC by Sn-Ti: Microstructure and mechanical properties[J]. 材料科学与技术, 2020, 40(0): 15-23.
[4] Z.C. Luo, H.P. Wang. Primary dendrite growth kinetics and rapid solidification mechanism of highly undercooled Ti-Al alloys[J]. 材料科学与技术, 2020, 40(0): 47-53.
[5] Shaoning Geng, Ping Jiang, Xinyu Shao, Lingyu Guo, Xuesong Gao. Heat transfer and fluid flow and their effects on the solidification microstructure in full-penetration laser welding of aluminum sheet[J]. 材料科学与技术, 2020, 46(0): 50-63.
[6] Zhen Chen, Daoyong Cong, Yin Zhang, Xiaoming Sun, Runguang Li, Shaohui Li, Zhi Yang, Chao Song, Yuxian Cao, Yang Ren, Yandong Wang. Intrinsic two-way shape memory effect in a Ni-Mn-Sn metamagnetic shape memory microwire[J]. 材料科学与技术, 2020, 45(0): 44-48.
[7] Peng Li, Shuai Wang, Yueqing Xia, Xiaohu Hao, Honggang Dong. Diffusion bonding of AlCoCrFeNi2.1 eutectic high entropy alloy to TiAl alloy[J]. 材料科学与技术, 2020, 45(0): 59-69.
[8] P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion[J]. 材料科学与技术, 2020, 45(0): 98-107.
[9] Jifeng Zhang, Ting Jia, Huan Qiu, Heguo Zhu, Zonghan Xie. Effect of cooling rate upon the microstructure and mechanical properties of in-situ TiC reinforced high entropy alloy CoCrFeNi[J]. 材料科学与技术, 2020, 42(0): 122-129.
[10] Yanfu Chai, Chao He, Bin Jiang, Jie Fu, Zhongtao Jiang, Qingshan Yang, Haoran Sheng, Guangsheng Huang, Dingfei Zhang, Fusheng Pan. Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy[J]. 材料科学与技术, 2020, 37(0): 26-37.
[11] Yinghui Zhou, Xin Lin, Nan Kang, Weidong Huang, Jiang Wang, Zhennan Wang. Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy[J]. 材料科学与技术, 2020, 37(0): 143-153.
[12] Xi Xie, Rui Yang, Yuyou Cui, Qing Jia, Chunguang Bai. Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties[J]. 材料科学与技术, 2020, 38(0): 86-92.
[13] Liu Weifeng, Cao Yanfei, Guo Yifeng, Sun Mingyue, Xu Bin, Li Dianzhong. Solidification microstructure of Cr4Mo4V steel forged in the semi-solid state[J]. 材料科学与技术, 2020, 38(0): 170-182.
[14] Varma S.K., Sanchez Francelia, Moncayo Sabastian, Ramana C.V.. Static and cyclic oxidation of Nb-Cr-V-W-Ta high entropy alloy in air from 600 to 1400 °C[J]. 材料科学与技术, 2020, 38(0): 189-196.
[15] P. Wang, C.S. Lao, Z.W. Chen, Y.K. Liu, H. Wang, H. Wendrock, J. Eckert, S. Scudino. Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting[J]. 材料科学与技术, 2020, 36(0): 18-26.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.