J. Mater. Sci. Technol. ›› 2020, Vol. 47: 10-19.DOI: 10.1016/j.jmst.2020.02.008

• Research Article • Previous Articles     Next Articles

Microbiologically influenced corrosion of Cu by nitrate reducing marine bacterium Pseudomonas aeruginosa

Yanan Pua,1, Wenwen Doua,d,*,1(), Tingyue Gub, Shiya Tangc, Xiaomei Hana, Shougang Chena,*()   

  1. aDepartment of Materials Science and Engineering, Ocean University of China, Qingdao 266100, China
    bDepartment of Chemical and Biomolecular Engineering, Institute for Corrosion and Multiphase Technology, Ohio University, Athens, OH 45701, USA
    cSINOPEC Research Institute of Safety Engineering, Qingdao, 266071, China
    dShandong Key Laboratory of Corrosion Science, Institute of Oceanology, Chinese Academy of Sciences, Qingdao, 266071, China
  • Received:2019-10-08 Revised:2019-12-11 Accepted:2020-01-07 Published:2020-06-15 Online:2020-06-24
  • Contact: Wenwen Dou,Shougang Chen
  • About author:1These authors contributed equally to this work.

Abstract:

The microbiologically influenced corrosion (MIC) mechanisms of copper by Pseudomonas aeruginosa as a typical strain of nitrate reducing bacteria (NRB) was investigated in this lab study. Cu was immersed in deoxygenated LB-NO3 seawater inoculated with P. aeruginosa and incubated for 2 weeks. Results showed that this NRB caused pitting and uniform corrosion. The maximum pit depths after 7 d and 14 d in 125 mL anaerobic vials with 50 mL broth were 5.1 μm and 9.1 μm, accompanied by specific weight losses of 1.3 mg/cm2 (7 d) and 1.7 mg/cm2 (14 d), respectively. Electrochemical measurements corroborated weight loss and pit depth data trends. Experimental results indicated that extracellular electron transfer for nitrate reduction was the main MIC mechanism and ammonia secreted by P. aeruginosa could also play a role in the overall Cu corrosion process.

Key words: Cu, Pseudomonas aeruginosa, Biofilm, Nitrate reducing bacteria, Microbiologically influenced corrosion, Pitting corrosion