[1] |
Hui Xiao, Manping Cheng, Lijun Song.
Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing
[J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
|
[2] |
B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi.
Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys
[J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
|
[3] |
Xueze Jin, Wenchen Xu, Zhongze Yang, Can Yuan, Debin Shan, Bugang Teng, Bo Cheng Jin.
Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy
[J]. J. Mater. Sci. Technol., 2020, 45(0): 133-145.
|
[4] |
Jiangguli Peng, Wenbin Liu, Jiangtao Zeng, Liaoying Zheng, Guorong Li, Anthony Rousseau, Alain Gibaud, Abdelhadi Kassiba.
Large electromechanical strain at high temperatures of novel <001> textured BiFeGaO3-BaTiO3 based ceramics
[J]. J. Mater. Sci. Technol., 2020, 48(0): 92-99.
|
[5] |
Zhixin Zhang, Jiangkun Fan, Bin Tang, Hongchao Kou, Jian Wang, Xin Wang, Shiying Wang, Qingjiang Wang, Zhiyong Chen, Jinshan Li.
Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65
[J]. J. Mater. Sci. Technol., 2020, 49(0): 56-69.
|
[6] |
Pengfei Zhang, Yunchang Xin, Ling Zhang, Shiwei Pan, Qing Liu.
On the texture memory effect of a cross-rolled Mg-2Zn-2Gd plate after unidirectional rolling
[J]. J. Mater. Sci. Technol., 2020, 41(0): 98-104.
|
[7] |
Yingdong Zhang, Fusen Yuan, Fuzhou Han, Muhammad Ali, Wenbin Guo, Geping Li, Chengze Liu, Hengfei Gu.
The influence of microtexture on the formation mechanism of nodules in Zircaloy-4 alloy tube
[J]. J. Mater. Sci. Technol., 2020, 47(0): 68-75.
|
[8] |
Risheng Pei, Sandra Korte-Kerzel, Talal Al-Samman.
Normal and abnormal grain growth in magnesium: Experimental observations and simulations
[J]. J. Mater. Sci. Technol., 2020, 50(0): 257-270.
|
[9] |
Yanfu Chai, Chao He, Bin Jiang, Jie Fu, Zhongtao Jiang, Qingshan Yang, Haoran Sheng, Guangsheng Huang, Dingfei Zhang, Fusheng Pan.
Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy
[J]. J. Mater. Sci. Technol., 2020, 37(0): 26-37.
|
[10] |
Mengcheng Zhou, Xinfang Zhang.
Optimization of <001> grain gene based on texture hereditary behavior of magnetic materials
[J]. J. Mater. Sci. Technol., 2020, 38(0): 1-6.
|
[11] |
Zhao Jie, Lv Liangxing, Wang Kehuan, Liu Gang.
Effects of strain state and slip mode on the texture evolution of a near-α TA15 titanium alloy during hot deformation based on crystal plasticity method
[J]. J. Mater. Sci. Technol., 2020, 38(0): 125-134.
|
[12] |
Xi Xie, Rui Yang, Yuyou Cui, Qing Jia, Chunguang Bai.
Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties
[J]. J. Mater. Sci. Technol., 2020, 38(0): 86-92.
|
[13] |
Hexiong Zhang, Xinfang Zhang.
Uniform texture in Al-Zn-Mg alloys using a coupled force field of electron wind and external load
[J]. J. Mater. Sci. Technol., 2020, 36(0): 149-159.
|
[14] |
Changjian Yan, Yunchang Xin, Ce Wang, Huan Liu, Qing Liu.
Microstructure and texture evolution of the β-Mg17A12 phase in a Mg alloy with an ultra-high Al content
[J]. J. Mater. Sci. Technol., 2020, 52(0): 89-99.
|
[15] |
Baojie Wang, Kai Xu, Daokui Xu, Xiang Cai, Yanxin Qiao, Liyuan Sheng.
Anisotropic corrosion behavior of hot-rolled Mg-8 wt.%Li alloy
[J]. J. Mater. Sci. Technol., 2020, 53(0): 102-111.
|