Microstructure and Wear Behavior of FeBSiNbCr Metallic Glass Coatings

J Mater Sci Technol ›› 2009, Vol. 25 ›› Issue (05): 687-690.

• Articles • Previous Articles Next Articles

Microstructure and Wear Behavior of FeBSiNbCr Metallic Glass Coatings

Jiangbo Cheng, Xiubing Liang, Binshi Xu, Yixiong Wu

1) National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China
2) Shanghai Key laboratory of Materials Laser Processing and Modi¯cation, Shanghai Jiaotong University, Shanghai 200240, China

Received:2008-10-15 Revised:2009-03-12 Online:2009-09-28 Published:2009-10-10
Supported by:
Key Natural Science Foundation of China (No. 50735006)
National Key Laboratory for Remanufacturing (No. 914OC85020508OC85)
Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, China (No. 200802)

Abstract

Abstract:

In this paper, FeBSiNbCr metallic glass coatings were prepared onto AISI 1045 steel substrate by using wire arc spraying process. The phase and structure of the coating were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and scanning election microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX). The microstructure of the coating consists of full amorphous phase. The coating has high hardness and low porosity. Full density and little oxides are detected in the coating. The mechanical properties, especially wear resistance, were investigated. The relationship between wear behavior and structure of the coatings were analyzed in detail. The main failure mechanism of the metallic glass coating is brittle breaking and fracture. The results indicate that FeBSiNbCr metallic glass coating has excellent resistance to abrasive wear.

Key words: Metallic glass, Coatings, Microstructure, Wear resistance

Jiangbo Cheng,Xiubing Liang,Binshi Xu,Yixiong Wu. Microstructure and Wear Behavior of FeBSiNbCr Metallic Glass Coatings[J]. J Mater Sci Technol, 2009, 25(05): 687-690.

References

[1 ] C.A. Schuh, T.C. Hufnagel and U. Ramamurty: Acta Mater., 2007, 55, 4067.
[2 ] S.J. Pang, T. Zhang, K. Asami and A. Inoue: Corros. Sci., 2002, 44, 1847.
[3 ] B. Shen, C. Chang, Z. Zhang and A. Inoue: J. Appl. Phys., 2007, 102(023515), 1.
[4 ] A. Inoue, B.L. Shen and C.T. Chang: Acta Mater., 2004, 52, 4093.
[5 ] A. Inoue, Y. Shinohara and J. S. Gook: Mater. Trans., JIM, 1995, 36, 1427.
[6 ] D.Y. Liu, W. Gao, Z.W. Li, H. Zhang and Z. Hu: Mater. Lett., 2007, 61, 165.
[7 ] F. Otsubo and K. Kishitake: Mater. Trans., 2005, 46, 80.
[8 ] H.S. Ni, X.H. Liu, X.C. Chang, W.L. Hou, W. Liu and J.Q. Wang: J. Alloys Compd., 2007, 427, 281.
[9 ] Y. Wu, P. Lin, C. Chu, Z. Wang, M. Cao and J. Hu: Mater. Lett., 2007, 61, 1867.
[10] M. Cherigui, N.E. Fenineche, G. Ji, T. Grosdidier and C. Coddet: J. Alloys Compd., 2007, 427, 281.
[11] L. Ajdelsztajn, B. Jodoin, P. Richer and E. Sanoucy: J. Therm. Spray Technol., 2006, 15(4), 495.
[12] A.P. Wang, Z.M. Wang, J.Zhang and J.Q. Wang: J. Alloys Compd., 2007, 440, 225.
[13] M.L. Thorpe: Adv. Mater. Process., 1993, 143(5), 50.
[14] D.J. Branagan, W.D. Swank, D.C. Haggard and J.Q. Fincke: Metall. Mater. Trans. A, 2001, 32, 2615.
[15] D.E. Alman and J.W. Newkirk: The Minerals, Metals, and Materials Society, Warrendale, PA, 2001, 111.
[16] Y. Wu, P. Lin, G. Xie, J. Hu and M. Cao: Mater. Sci. Eng., A 2006, 430, 34.
[17] L. Ajdelsztajn, B. Jodoin, P. Richer, T. Grosdidier and C. Coddet: J. Therm. Spray Technol., 2006, 15(4), 495.
[18] A. Inoue, T. Zhang and T. Masumoto: Mater. Trans., JIM 1989, 30, 965.
[19] F.R. De Boer, R. Boom, W.C.M. Mattens, A.R. Miedema and A.K. Niesser: Cohesion in Metals: Transition Metal Alloys, North-Holland, Amsterdam, The
Netherlands 1989, 217.
[20] V. Ponnambalam, S.J. Poon and G.J. Shiflet: J. Mater. Res., 2004, 19, 1320.
[21] O.A. Graeve, R. Kanakala, L. Kaufman, et al.: Mater. Lett., 2008, 62, 2988.

[1]	Lin Yuan, Jiangtao Xiong, Yajie Du, Jin Ren, Junmiao Shi, Jinglong Li. Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler [J]. J. Mater. Sci. Technol., 2021, 61(0): 176-185.
[2]	Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw. Tensile deformation behavior and mechanical properties of a bulk cast Al_0.9CoFeNi₂ eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
[3]	Qiaoyue Zhang, Shun-Xing Liang, Zhe Jia, Wenchang Zhang, Weimin Wang, Lai-Chang Zhang. Efficient nanostructured heterogeneous catalysts by electrochemical etching of partially crystallized Fe-based metallic glass ribbons [J]. J. Mater. Sci. Technol., 2021, 61(0): 159-168.
[4]	Jincheng Wang, Yujing Liu, Chirag Dhirajlal Rabadia, Shun-Xing Liang, Timothy Barry Sercombe, Lai-Chang Zhang. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture [J]. J. Mater. Sci. Technol., 2021, 61(0): 221-233.
[5]	Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen. NbMoTiVSi_x refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure [J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7.
[6]	K.J. Tan, X.G. Wang, J.J. Liang, J. Meng, Y.Z. Zhou, X.F. Sun. Effects of rejuvenation heat treatment on microstructure and creep property of a Ni-based single crystal superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 206-215.
[7]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[8]	Xing Zhou, Jingrui Deng, Changqing Fang, Wanqing Lei, Yonghua Song, Zisen Zhang, Zhigang Huang, Yan Li. Additive manufacturing of CNTs/PLA composites and the correlation between microstructure and functional properties [J]. J. Mater. Sci. Technol., 2021, 60(0): 27-34.
[9]	Zijuan Xu, Zhongtao Li, Yang Tong, Weidong Zhang, Zhenggang Wu. Microstructural and mechanical behavior of a CoCrFeNiCu₄ non-equiatomic high entropy alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 35-43.
[10]	B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys [J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
[11]	Xiong-jie Gu, Wei-li Cheng, Shi-ming Cheng, Yan-hui Liu, Zhi-feng Wang, Hui Yu, Ze-qin Cui, Li-fei Wang, Hong-xia Wang. Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion [J]. J. Mater. Sci. Technol., 2021, 60(0): 77-89.
[12]	L. Deng, K. Kosiba, R. Limbach, L. Wondraczek, U. Kühn, S. Pauly. Plastic deformation of a Zr-based bulk metallic glass fabricated by selective laser melting [J]. J. Mater. Sci. Technol., 2021, 60(0): 139-146.
[13]	Yanxin Qiao, Daokui Xu, Shuo Wang, Yingjie Ma, Jian Chen, Yuxin Wang, Huiling Zhou. Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 168-176.
[14]	Yunsheng Wu, Xuezhi Qin, Changshuai Wang, Lanzhang Zhou. Microstructural evolution and its influence on the impact toughness of GH984G alloy during long-term thermal exposure [J]. J. Mater. Sci. Technol., 2021, 60(0): 61-69.
[15]	D.X. Han, L. Zhao, S.H. Chen, G. Wang, K.C. Chan. Critical transitions in the shape morphing of kirigami metallic glass [J]. J. Mater. Sci. Technol., 2021, 61(0): 204-212.

Microstructure and Wear Behavior of FeBSiNbCr Metallic Glass Coatings

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments