J Mater Sci Technol ›› 2009, Vol. 25 ›› Issue (02): 230-232.

• Articles • Previous Articles     Next Articles

Aging Strengthening in Rapidly Solidified Cu-Cr-Sn- Zn Alloy

Juanhua Su, Fengzhang Ren, Baohong Tian, Pin Liu and Qiming Dong   

  1. College of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China
  • Received:2007-05-08 Revised:2007-09-26 Online:2009-03-28 Published:2009-10-10
  • Contact: Juanhua Su
  • Supported by:

    the Startup Foundation for Doctor Scientific Research in Henan University of Science and Technology (No. 20061009)
    the Special Fund for Important Forepart Research in Henan University of Science and Technology (No. 2008ZD003)
    the National Natural Science Foundation of China under grant No. 50771042

Abstract:

It is known that the strength of alloys can be successfully improved by rapid solidification. The paper presents a process where Cu-Cr-Sn-Zn lead frame alloy is produced by rapid solidification and aging. The microcrystalline structure of rapidly solidified Cu-Cr-Sn-Zn alloy is smaller grain structure examined by optical metallography. The effects of aging processes on the microstructure and properties of the lead frame alloy were investigated. Aged at 500°C for 15 min the fine coherent precipitates Cr distribute in Cu matrix observed by transmission electron microscopy and the properties of hardness and electrical conductivity properties can reach 178HV and 61%IACS, respectively.

Key words: Cu-Cr-Sn-Zn alloy, Strengthening, Aging, Rapid solidification