J Mater Sci Technol ›› 2009, Vol. 25 ›› Issue (01): 90-94.

• Letters • Previous Articles     Next Articles

Creep Behavior and Its Influence on the Mechanics of Electrodeposited Nickel Films

Zengsheng Ma, Shiguo Long, Yong Pan and Yichun Zhou   

  1. Key Laboratory of Low Dimensional Materials & Application Technology of Ministry of Education, Faculty of Materials,
    Optoelectronics and Physics, Xiangtan University, Xiangtan 411105, China
  • Received:2007-08-01 Online:2009-01-28 Published:2009-10-10
  • Contact: Yichun Zhou

Abstract:

In order to improve the accuracy and comparability of hardness and elastic modulus measurements in nanoin- dentation, an evaluation of the creep behavior and its influence on the mechanical properties of the electrode- posited nickel film has been conducted. The influence of loading time and hold period on the hardness and elastic modulus results at maximum load 5000 μN has also been examined. It is found that with increasing the loading time, the creep value is decreased. However, the creep value is increased when the hold period is increased. The elastic modulus results are more reliable if the hold period is longer. If the hold period is long enough, the loading time has no remarkable effect on the hardness and elastic modulus measured.

Key words: Nanoindentation, Hardness, Elastic modulus, Creep