[1] |
Hui Xiao, Manping Cheng, Lijun Song.
Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing
[J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
|
[2] |
B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi.
Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys
[J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
|
[3] |
Yi Zhang, Lili Tan, Qingchuan Wang, Ming Gao, Iniobong P. Etim, Ke Yang.
Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy
[J]. J. Mater. Sci. Technol., 2020, 51(0): 102-110.
|
[4] |
Kaustubh Bawane, Kathy Lu.
Microstructure evolution of nanostructured ferritic alloy with and without Cr3C2 coated SiC at high temperatures
[J]. J. Mater. Sci. Technol., 2020, 43(0): 126-134.
|
[5] |
Yanfu Chai, Chao He, Bin Jiang, Jie Fu, Zhongtao Jiang, Qingshan Yang, Haoran Sheng, Guangsheng Huang, Dingfei Zhang, Fusheng Pan.
Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy
[J]. J. Mater. Sci. Technol., 2020, 37(0): 26-37.
|
[6] |
Mengcheng Zhou, Xinfang Zhang.
Optimization of <001> grain gene based on texture hereditary behavior of magnetic materials
[J]. J. Mater. Sci. Technol., 2020, 38(0): 1-6.
|
[7] |
Zhao Jie, Lv Liangxing, Wang Kehuan, Liu Gang.
Effects of strain state and slip mode on the texture evolution of a near-α TA15 titanium alloy during hot deformation based on crystal plasticity method
[J]. J. Mater. Sci. Technol., 2020, 38(0): 125-134.
|
[8] |
Xi Xie, Rui Yang, Yuyou Cui, Qing Jia, Chunguang Bai.
Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties
[J]. J. Mater. Sci. Technol., 2020, 38(0): 86-92.
|
[9] |
Hexiong Zhang, Xinfang Zhang.
Uniform texture in Al-Zn-Mg alloys using a coupled force field of electron wind and external load
[J]. J. Mater. Sci. Technol., 2020, 36(0): 149-159.
|
[10] |
Przemysł Kot; aw, BaczmańAndrzej ski, GadalińElż ska; bieta, WrońSebastian ski, WrońMarcin ski, WróMirosł bel; aw, Gizo Bokuchava, ScheffzüChristian k, Krzysztof Wierzbanowski.
Evolution of phase stresses in Al/SiCp composite during thermal cycling and compression test studied using diffraction and self-consistent models
[J]. J. Mater. Sci. Technol., 2020, 36(0): 176-189.
|
[11] |
P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker.
In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion
[J]. J. Mater. Sci. Technol., 2020, 45(0): 98-107.
|
[12] |
Xueze Jin, Wenchen Xu, Zhongze Yang, Can Yuan, Debin Shan, Bugang Teng, Bo Cheng Jin.
Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy
[J]. J. Mater. Sci. Technol., 2020, 45(0): 133-145.
|
[13] |
Changjian Yan, Yunchang Xin, Ce Wang, Huan Liu, Qing Liu.
Microstructure and texture evolution of the β-Mg17A12 phase in a Mg alloy with an ultra-high Al content
[J]. J. Mater. Sci. Technol., 2020, 52(0): 89-99.
|
[14] |
Baojie Wang, Kai Xu, Daokui Xu, Xiang Cai, Yanxin Qiao, Liyuan Sheng.
Anisotropic corrosion behavior of hot-rolled Mg-8 wt.%Li alloy
[J]. J. Mater. Sci. Technol., 2020, 53(0): 102-111.
|
[15] |
Yingdong Zhang, Fusen Yuan, Fuzhou Han, Muhammad Ali, Wenbin Guo, Geping Li, Chengze Liu, Hengfei Gu.
The influence of microtexture on the formation mechanism of nodules in Zircaloy-4 alloy tube
[J]. J. Mater. Sci. Technol., 2020, 47(0): 68-75.
|