J. Mater. Sci. Technol. ›› 2015, Vol. 31 ›› Issue (9): 918-922.DOI: 10.1016/j.jmst.2015.07.016

• Orginal Article • Previous Articles     Next Articles

Creating Local Reinforcement of a Channel in a Composite Casting Using Electromagnetic Separation

Slawomir Golak*, Maciej Dyzia   

  1. Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Katowice 40748, Poland
  • Received:2014-11-11 Online:2015-09-10
  • Contact: Corresponding author. Ph.D.; Tel.: +48 32 6034138; Fax: +48 32 6034280. E-mail address: slawomir.golak@polsl.pl (S. Golak).
  • Supported by:
    This work was supported by the National Science Centre of Poland (Grant No. N508 620940).

Abstract: This article presents a new method to obtain local reinforcement in near-surface layers of channels in castings made of a particle-reinforced metal matrix composite in the alternating electromagnetic field generated by an inductor placed inside the channel. In centrifugal casting, the centrifugal force on the particles leads to the formation of composite structures, while in the proposed method, the electromagnetic force field on the particles results in the designed structure of the composite casting. The article reports the experimental verification of this method using an aluminium sleeve reinforced locally with SiC particles at the inner wall.

Key words: Metal matrix composites, Functionally graded materials, Electromagnetic separation