Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle

J Mater Sci Technol ›› 2011, Vol. 27 ›› Issue (5): 475-480.

• Modeling and Simulations • Previous Articles

Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle

Ning Zhong¹⁾, Xiaodong Wang²⁾, Zhenghong Guo²⁾, Yonghua Rong²⁾

1) Institute of Marine Materials Science and Engineering, Shanghai Maritime University, Shanghai 201306, China
2) School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2010-08-12 Revised:2010-11-25 Online:2011-05-28 Published:2011-05-28
Contact: Zhenghong Guo
Supported by:
the National Natural Science Foundation of China (Grant Nos. 51001069 and 51031001)

Abstract

Abstract: The crystallographic features of pearlite were investigated by experiments and edge-to-edge matching principle. Two new orientation relationships between ferrite and cementite were determinated by selected area electron diffraction and then explained by our modified edge-to-edge matching method. The consistence of the experimental results with theoretical prediction confirms the practicability of the modified edge-to-edge matching model.

Key words: Orientation relationship, Pearlite, Edge-to-edge matching, Transmission electron microscopy

Ning Zhong, Xiaodong Wang, Zhenghong Guo, Yonghua Rong. Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle[J]. J Mater Sci Technol, 2011, 27(5): 475-480.

[1]	Hu Liu, Jie Wei, Junhua Dong, Yiqing Chen, Yumin Wu, Yangtao Zhou, Subedi Dhruba Babu, Wei Ke. Influence of cementite spheroidization on relieving the micro-galvanic effect of ferrite-pearlite steel in acidic chloride environment [J]. J. Mater. Sci. Technol., 2021, 61(0): 234-246.
[2]	Xiru Hua, Qiang Yang, Dongdong Zhang, Fanzhi Meng, Chong Chen, Zihao You, Jinghuai Zhang, Shuhui Lv, Jian Meng. Microstructures and mechanical properties of a newly developed high-pressure die casting Mg-Zn-RE alloy [J]. J. Mater. Sci. Technol., 2020, 53(0): 174-184.
[3]	Haidong Sun, Yuhui Wang, Zuohua Wang, Ning Liu, Yan Peng, Xiujuan Zhao, Ruiming Ren, Hongwang Zhang. Twinned substructure in lath martensite of water quenched Fe-0.2 %C and Fe-0.8 %C steels [J]. J. Mater. Sci. Technol., 2020, 49(0): 126-132.
[4]	Majid Jafari, Chan-Woo Bang, Jong-Chan Han, Kyeong-Min Kim, Seon-Hyeong Na, Chan-Gyung Park, Byeong-Joo Lee. Evolution of microstructure and tensile properties of cold-drawn hyper-eutectoid steel wires during post-deformation annealing [J]. J. Mater. Sci. Technol., 2020, 41(0): 1-11.
[5]	Meiqiong Ou, Yingche Ma, Weiwei Xing, Xianchao Hao, Bo Chen, Leilei Ding, Kui Liu. Stress rupture properties and deformation mechanisms of K4750 alloy at the range of 650 °C to 800 °C [J]. J. Mater. Sci. Technol., 2019, 35(7): 1270-1277.
[6]	Kai Guan, Fanzhi Meng, Pengfei Qin, Qiang Yang, Dongdong Zhang, Baishun Li, Wei Sun, Shuhui Lv, Yuanding Huang, Norbert Hort, Jian Meng. Effects of samarium content on microstructure and mechanical properties of Mg-0.5Zn-0.5Zr alloy [J]. J. Mater. Sci. Technol., 2019, 35(7): 1368-1377.
[7]	Le Zhou, Abhishek Mehta, Brandon McWilliams, Kyu Cho, Yongho Sohn. Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment [J]. J. Mater. Sci. Technol., 2019, 35(6): 1153-1164.
[8]	Yuefeng Jiang, Bo Zhang, Dongying Wang, Yu Zhou, Jianqiu Wang, En-Hou Han, Wei Kea. Hydrogen-assisted fracture features of a high strength ferrite-pearlite steel [J]. J. Mater. Sci. Technol., 2019, 35(6): 1081-1087.
[9]	Sun Zhi-peng, Zhang Jin-yu, Dai Fu-zhi, Xu Ben, Zhang Wen-zheng. A molecular dynamics study on formation of the self-accommodation microstructure during phase transformation [J]. J. Mater. Sci. Technol., 2019, 35(11): 2638-2646.
[10]	Bo Zhou, Manling Sui. High density stacking faults of {10$\bar{1}$1} compression twin in magnesium alloys [J]. J. Mater. Sci. Technol., 2019, 35(10): 2263-2268.
[11]	Jiangbo Lu, Lu Lu, Sheng Cheng, Ming Liu, Chunlin Jia. Microstructure and secondary phases in epitaxial LaBaCo₂O_{5.5 +}_δ thin films [J]. J. Mater. Sci. Technol., 2018, 34(2): 398-402.
[12]	Yi Gaosong, Zeng Weizhi, D. Poplawsky Jonathan, A. Cullen David, Wang Zhifen, L. Free Michael. Characterizing and modeling the precipitation of Mg-rich phases in Al 5xxx alloys aged at low temperatures [J]. J. Mater. Sci. Technol., 2017, 33(9): 991-1003.
[13]	Gao W.H.,Yi X.Y.,Meng X.L.,Song G.,Cai W.,Zhao L.C.. Stress-Induced Martensitic Transformation of Zr50Cu25Ni10Co15Nanocrystals Embedded in an Amorphous Matrix [J]. J. Mater. Sci. Technol., 2017, 33(3): 276-280.
[14]	Beining Du, Zhiwu Shi, Jinxia Yang, Zhaokuang Chu, Chuanyong Cui, Xiaofeng Sun, Liyuan Sheng, Yufeng Zheng. M₅B₃ Boride at the Grain Boundary of a Nickel-based Superalloy [J]. J. Mater. Sci. Technol., 2016, 32(3): 265-270.
[15]	Tan Zhen,Wang Lu,Xue Yunfei,Cheng Xingwang,Zhang Long. Structural Modification of Al₆₅Cu_16.5Ti_18.5 Amorphous Powder through Annealing and Post Milling: Improving Thermal Stability [J]. J. Mater. Sci. Technol., 2016, 32(12): 1326-1331.

Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle

RichHTML

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments