[1] |
Xiaoxu Liu, Yong Du, Shuhong Liu, Kaiming Cheng, Zhihong Zhang.
Phase equilibria and crystal structure of ternary compounds in Al-rich corner of Al-Er-Y system at 673 and 873K
[J]. J. Mater. Sci. Technol., 2021, 60(0): 128-138.
|
[2] |
A.V. Pozdniakov, R.Yu. Barkov.
Microstructure and mechanical properties of novel Al-Y-Sc alloys with high thermal stability and electrical conductivity
[J]. J. Mater. Sci. Technol., 2020, 36(0): 1-6.
|
[3] |
Inime Ime Udoh, Hongwei Shi, Mohammad Soleymanibrojeni, Fuchun Liu, En-Hou Han.
Inhibition of galvanic corrosion in Al/Cu coupling model by synergistic combination of 3-Amino-1,2,4-triazole-5-thiol and cerium chloride
[J]. J. Mater. Sci. Technol., 2020, 44(0): 102-115.
|
[4] |
Di Zhang, Zhen Zhang, Yanlin Pan, Yanbin Jiang, Linzhong Zhuang, Jishan Zhang, Xinfang Zhang.
Current-driving intergranular corrosion performance regeneration below the precipitates solvus temperature in Al-Mg alloy
[J]. J. Mater. Sci. Technol., 2020, 53(0): 132-139.
|
[5] |
Yi Wang, Wenyuan Li, Liang Ma, Wei Li, Xingbo Liu.
Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies—A review
[J]. J. Mater. Sci. Technol., 2020, 55(0): 35-55.
|
[6] |
Xuan Liu, Jilai Xue, Zhichao Guo, Cheng Zhang.
Segregation behaviors of Sc and unique primary Al3Sc in Al-Sc alloys prepared by molten salt electrolysis
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1422-1431.
|
[7] |
Zhaoming Li, Haichang Jiang, Yunli Wang, Duo Zhang, Desheng Yan, Lijian Rong.
Effect of minor Sc addition on microstructure and stress corrosion cracking behavior of medium strength Al-Zn-Mg alloy
[J]. J. Mater. Sci. Technol., 2018, 34(7): 1172-1179.
|
[8] |
Deng Shunjie, Wang Peng, He Yedong, Zhang Jin.
Surface Microstructure and High Temperature Oxidation Resistance of Thermal Sprayed NiCoCrAlY Bond-Coat Modified by Cathode Plasma Electrolysis
[J]. J. Mater. Sci. Technol., 2017, 33(9): 1055-1060.
|
[9] |
Niu Pengliang, Li Wenya, Zhang Zhihan, Yang Xiawei.
Global and local constitutive behaviors of friction stir welded AA2024 joints
[J]. J. Mater. Sci. Technol., 2017, 33(9): 987-990.
|
[10] |
Giulio Timelli, Daniele Caliari, Jovid Rakhmonov.
Influence of Process Parameters and Sr Addition on the Microstructure and Casting Defects of LPDC A356 Alloy for Engine Blocks
[J]. J. Mater. Sci. Technol., 2016, 32(6): 515-523.
|
[11] |
Jiang Jufu,Chen Gang,Wang Ying.
Compression Mechanical Behaviour of 7075 Aluminium Matrix Composite Reinforced with Nano-sized SiC Particles in Semisolid State
[J]. J. Mater. Sci. Technol., 2016, 32(11): 1197-1203.
|
[12] |
Belkin P.N.,Kusmanov S.A.,Zhirov A.V.,Belkin V.S.,Parfenyuk V.I..
Anode Plasma Electrolytic Saturation of Titanium Alloys with Nitrogen and Oxygen
[J]. J. Mater. Sci. Technol., 2016, 32(10): 1027-1032.
|
[13] |
Batool Farhoodi, Ramin Raiszadeh*, Mohammad-Hasan Ghanaatian.
Role of Double Oxide Film Defects in the Formation of Gas Porosity in Commercial Purity and Sr-containing Al Alloys
[J]. J. Mater. Sci. Technol., 2014, 30(2): 154-162.
|
[14] |
P. Nageswara rao, Dharmendra Singh, R. Jayaganthan.
Effect of Post Cryorolling Treatments on Microstructural and Mechanical Behaviour of Ultrafine Grained Al-Mg-Si Alloy
[J]. J. Mater. Sci. Technol., 2014, 30(10): 998-1005.
|
[15] |
M. Mubarak Ali,V.Raj.
Formation and Characterization of Ceramic Nanocomposite Crystalline Coatings on Aluminium by Anodization
[J]. J. Mater. Sci. Technol., 2013, 29(7): 595-602.
|