Influence of Rolling Reductions on Recrystallization Texture in Commercially Pure Al

Abstract

Abstract: The recrystallization texture in commercially pure Al is investigated after the samples are rolled differently and annealed.The samples with low rol- ling reductions could be generally recovered or recrystallized in situ and characterized by the re- tained G{110}<001>component.This recovery process decreases during annealing with the increase of reduction.The appearance of the B/R{359}. <132>and R{123}<634>components de- pending on the rolling reduction is investigated and the less developed Cube{100}<001>component in commercially pure ahninium is also discussed.

Key words: recrystallization, texture, aluminium, orientation distribution function (ODF)

MAO Weimin University of Science and Technology,Beijing,100083,China.. Influence of Rolling Reductions on Recrystallization Texture in Commercially Pure Al[J]. J Mater Sci Technol, 1990, 6(4): 257-262.

[1]	L.Y. Zhao, H. Yan, R.S. Chen, En-Hou Han. Orientations of nuclei during static recrystallization in a cold-rolled Mg-Zn-Gd alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 162-167.
[2]	Qiyu Liao, Yanchao Jiang, Qichi Le, Xingrui Chen, Chunlong Cheng, Ke Hu, Dandan Li. Hot deformation behavior and processing map development of AZ110 alloy with and without addition of La-rich Mish Metal [J]. J. Mater. Sci. Technol., 2021, 61(0): 1-15.
[3]	Xiaoxu Liu, Yong Du, Shuhong Liu, Kaiming Cheng, Zhihong Zhang. Phase equilibria and crystal structure of ternary compounds in Al-rich corner of Al-Er-Y system at 673 and 873K [J]. J. Mater. Sci. Technol., 2021, 60(0): 128-138.
[4]	Hui Xiao, Manping Cheng, Lijun Song. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing [J]. J. Mater. Sci. Technol., 2021, 60(0): 216-221.
[5]	B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys [J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
[6]	Xiaoming Qian, Nick Parson, X.-Grant Chen. Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing [J]. J. Mater. Sci. Technol., 2020, 52(0): 189-197.
[7]	S.H. Lu, D. Wu, R.S. Chen, En-hou Han. Microstructure and texture optimization by static recrystallization originating from {10-12} extension twins in a Mg-Gd-Y alloy [J]. J. Mater. Sci. Technol., 2020, 59(0): 44-60.
[8]	Liying Zhou, Wenxiong Chen, Shaobo Feng, Mingyue Sun, Bin Xu, Dianzhong Li. Dynamic recrystallization behavior and interfacial bonding mechanism of 14Cr ferrite steel during hot deformation bonding [J]. J. Mater. Sci. Technol., 2020, 43(0): 92-103.
[9]	Qinghang Wang, Bin Jiang, Aitao Tang, Jie Fu, Zhongtao Jiang, Haoran Sheng, Dingfei Zhang, Guangsheng Huang, Fusheng Pan. Unveiling annealing texture formation and static recrystallization kinetics of hot-rolled Mg-Al-Zn-Mn-Ca alloy [J]. J. Mater. Sci. Technol., 2020, 43(0): 104-118.
[10]	Jongbin Go, Jong Un Lee, Hui Yu, Sung Hyuk Park. Influence of Bi addition on dynamic recrystallization and precipitation behaviors during hot extrusion of pure Mg [J]. J. Mater. Sci. Technol., 2020, 44(0): 62-75.
[11]	Yingdong Zhang, Fusen Yuan, Fuzhou Han, Muhammad Ali, Wenbin Guo, Geping Li, Chengze Liu, Hengfei Gu. The influence of microtexture on the formation mechanism of nodules in Zircaloy-4 alloy tube [J]. J. Mater. Sci. Technol., 2020, 47(0): 68-75.
[12]	Sang-Hoon Kim, Sang Won Lee, Byoung Gi Moon, Ha Sik Kim, Sung Hyuk Park. Variation in dynamic deformation behavior and resultant yield asymmetry of AZ80 alloy with extrusion temperature [J]. J. Mater. Sci. Technol., 2020, 46(0): 225-236.
[13]	Jian Yang Zhang, Bin Xu, Naeem ul Haq Tariq, Ming Yue Sun, Dian Zhong Li, Yi Yi Li. Effect of strain rate on plastic deformation bonding behavior of Ni-based superalloys [J]. J. Mater. Sci. Technol., 2020, 40(0): 54-63.
[14]	Risheng Pei, Sandra Korte-Kerzel, Talal Al-Samman. Normal and abnormal grain growth in magnesium: Experimental observations and simulations [J]. J. Mater. Sci. Technol., 2020, 50(0): 257-270.
[15]	Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Xingrong Chu. Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die [J]. J. Mater. Sci. Technol., 2020, 47(0): 88-102.

Influence of Rolling Reductions on Recrystallization Texture in Commercially Pure Al

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments