Recent Developments in the Continuous Processing of Steels

Search for articles:

J Mater Sci Technol ›› 1990, Vol. 6 ›› Issue (2): 79-87.

• Articles • Next Articles

Recent Developments in the Continuous Processing of Steels

Hiroshi Takechi Nippon Steel Corporation,Japan.

Received:1990-03-28 Revised:1990-03-28 Online:1990-03-28 Published:2009-10-10

Abstract

Abstract: This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.

Key words: continuous casting, steel rolling, heat treatment, integrated processing

Hiroshi Takechi Nippon Steel Corporation,Japan.. Recent Developments in the Continuous Processing of Steels[J]. J Mater Sci Technol, 1990, 6(2): 79-87.

About JMST

Authors and reviewers

Contact

WeChat

[1]	K.J. Tan, X.G. Wang, J.J. Liang, J. Meng, Y.Z. Zhou, X.F. Sun. Effects of rejuvenation heat treatment on microstructure and creep property of a Ni-based single crystal superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 206-215.
[2]	Qiang Ren, Yuexin Zhang, Ying Ren, Lifeng Zhang, Jujin Wang, Yadong Wang. Prediction of spatial distribution of the composition of inclusions on the entire cross section of a linepipe steel continuous casting slab [J]. J. Mater. Sci. Technol., 2021, 61(0): 147-158.
[3]	Xueze Jin, Wenchen Xu, Zhongze Yang, Can Yuan, Debin Shan, Bugang Teng, Bo Cheng Jin. Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy [J]. J. Mater. Sci. Technol., 2020, 45(0): 133-145.
[4]	Lei Lei, Yu Su, Leandro Bolzoni, Fei Yang. Evaluation on the interface characteristics, thermal conductivity, and annealing effect of a hot-forged Cu-Ti/diamond composite [J]. J. Mater. Sci. Technol., 2020, 49(0): 7-14.
[5]	Kui Wang, Jingfeng Wang, Xiaoxu Dou, Yuanding Huang, Norbert Hort, Sarkis Gavras, Shijie Liu, Yanwu Cai, Jinxing Wang, Fusheng Pan. Microstructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous casting [J]. J. Mater. Sci. Technol., 2020, 52(0): 72-82.
[6]	Chao Cai, Xu Wu, Wan Liu, Wei Zhu, Hui Chen, Jasper Chua Dong Qiu, Chen-Nan Sun, Jie Liu, Qingsong Wei, Yusheng Shi. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance [J]. J. Mater. Sci. Technol., 2020, 57(0): 51-64.
[7]	Sheng Cao, Qiaodan Hu, Aijun Huang, Zhuoer Chen, Ming Sun, Jiahua Zhang, Chenxi Fu, Qingbo Jia, Chao Voon Samuel Lim, Rodney R.Boyer, Yi Yang, Xinhua Wu. Static coarsening behaviour of lamellar microstructure in selective laser melted Ti-6Al-4V [J]. J. Mater. Sci. Technol., 2019, 35(8): 1578-1586.
[8]	Decheng Kong, Chaofang Dong, Xiaoqing Ni, Liang Zhang, Jizheng Yao, Cheng Man, Xuequn Cheng, Kui Xiao, Xiaogang Li. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes [J]. J. Mater. Sci. Technol., 2019, 35(7): 1499-1507.
[9]	Z.B. Zhao, Z. Liu, Q.J. Wang, J.R. Liu, R. Yang. Analysis of local crystallographic orientation in an annealed Ti60 billet [J]. J. Mater. Sci. Technol., 2019, 35(4): 591-595.
[10]	Jiajia Sun, Hejun Li, Liyuan Han, Qiang Song. Enhancing both strength and toughness of carbon/carbon composites by heat-treated interface modification [J]. J. Mater. Sci. Technol., 2019, 35(3): 383-393.
[11]	Jinliang Zhang, Bo Song, Qingsong Wei, Dave Bourell, . A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends [J]. J. Mater. Sci. Technol., 2019, 35(2): 270-284.
[12]	, Yongsheng Liu, Mingxi Zhao, Fang Ye, Laifei Cheng. Effect of heat treatment temperature on microstructure and electromagnetic shielding properties of graphene/SiBCN composites [J]. J. Mater. Sci. Technol., 2019, 35(12): 2897-2905.
[13]	Liu Guoliang, Yang Shanwu, Ding Jianwen, Han Wentuo, Zhou Lujun, Zhang Mengqi, Zhou Shanshan, Misra R.D.K., Wan Farong, Shang Chengjia. Formation and evolution of layered structure in dissimilar welded joints between ferritic-martensitic steel and 316L stainless steel with fillers [J]. J. Mater. Sci. Technol., 2019, 35(11): 2665-2681.
[14]	S.Z. Zhang, Z.W. Song, J.C. Han, C.J. Zhang, P. Lin, D.D. Zhu, F.T. Kong, Y.Y. Chen. Effect of 2-6 at.% Mo addition on microstructural evolution of Ti-44Al alloy [J]. J. Mater. Sci. Technol., 2018, 34(7): 1196-1204.
[15]	W.H. Wang, D. Wu, R.S. Chen, X.N. Zhang. Effect of solute atom concentration and precipitates on serrated flow in Mg-3Nd-Zn alloy [J]. J. Mater. Sci. Technol., 2018, 34(7): 1236-1242.

Recent Developments in the Continuous Processing of Steels

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments