Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

J Mater Sci Technol ›› 2010, Vol. 26 ›› Issue (5): 423-428.

• Novel Processing and Characterization Methods • Previous Articles Next Articles

Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

Hui Wang, Donghui Yang, Siyuan He, Deping He

1) Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
2) College of Mechanics and Materials, Hohai University, Nanjing 210098, China
3) State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China

Received:2009-10-26 Revised:2009-11-06 Online:2010-05-31 Published:2010-06-01
Contact: WANG Hui
Supported by:
the National Program on Key Basic Research Project of China (No. 2006CB601201)
the Research Fund for Doctoral Program of Higher Education of China (No. 200802941010)
the Natural Science Foundation of Hohai University (No. 2008428011)
the Scientific Research Startup Fund of Hohai University (No. 2084140801109)

Abstract

Abstract:

The open-cell Al foam core sandwiches (AFCSs) were successfully fabricated by using a specially designed Zn-Al-Cu based filler alloy via vibration aided liquid phase bonding method. The effects of the vibration on the bonding seam were investigated and the bonding strength between Al foam core and solid Al alloy face sheet was tested by shearing tests. The results show that vibration can significantly improve the quality of the bonding and the shearing strength of the bonding seam, which implies that this joining method has a good potential in practical applications.

Key words: Open-cell Al foam core sandwich, Liquid phase bonding, Vibration, Fabrication, Mechanical property

Hui Wang Donghui Yang Siyuan He Deping He. Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties[J]. J Mater Sci Technol, 2010, 26(5): 423-428.

References

[1] M. F. Ashby, A. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley: Metal Foams: A Design Guide., Butterworth-Heinemann, Boston , 2000, 3.
[2] H. P. Degischer and B. Kriszi: Handbook of Cellular Metals, Wiley-VCH, Weinheim, 2002, 71.
[3] M. F. Ashby and T. J. Lu: Sci. China, 2003, B46, 521.
[4] A. G. Evans, J. W. Hutchinson and M. F. Ashby: Progr. Mater. Sci., 1999, 43, 171.
[5] L-P. Lefebvre, J. Banhart and D. C. Dunand: Adv. Eng. Mater., 2008, 10, 775.
[6] J. Banhart: Int. J. Vehicle. Design, 2005, 37, 114.
[7] J. Banhart and H-W. Seeliger: Adv. Eng. Mater., 2008, 10, 793.
[8] R. A. Shenoi and J. F. Wellicome: Composite Materials in Maritime Structures, Cambridge University Press, Cambridge, 1993, 154.
[9] D. Schwingel, H-W. Seeliger H-W, C. Vecchionacci, D. Alwes and J. Dittrich: Acta Astrona., 2007, 61, 326.
[10] L. J. Gibson and M. F. Ashby: Cellular Solids: Structure and Properties, 2nd edn, Cambridge University Press, Cambridge, 1997, 125.
[11] D. P. He: Ultralight Porous Metals, Science Press, Beijing, 2009, 93.(in Chinese)
[12] F. Baumg?rtner, I. Duarte and J. Banhart : Adv. Eng. Mater., 2000, 2, 168.
[13] N. M. Bikales: Adhesion and Bonding, Wiley Inter-science, Michigan, 1971, 35.
[14] F. Hillen, D. Pickart-Castillo, I. J. Rass and E. Lugscheider: Weld. Cutt., 2000, 52, 454.
[15] S. Y. Chang, Y. T. Huang and T. H. Chuang: J. Mater. Eng. Perf., 2003, 12, 123.
[16] S. X. L¨1, Z. S. Yu, Z. W. X¨1, J. C. Yan, S. Q. Yang and L. WuTrans. China. Weld. Inst., 2001, 22, 73. (in Chinese)
[17] H. B. Xu, J. C. Yan, Z. W. Xu, B. Y. Zhang and S. Q. Yang: Comp., 2006, A37, 1458.
[18] H. Wang, S. Y. He, X. M. Chu and D. P. He: Acta Metal. Sin., 2009, 45, 723. (in Chinese)
[19] D. P. He, H. Wang, S. Y. He and D. C. Tong: China Patent, ZL 200810018812.3, 2009
[20] Z. W. Xu, J. C. Yan, G. H. Wu, X. L. Kong and S. Q. Yang: Comp. Sci. Technol., 2005, 65, 1959.
[21] H. A. Kucheck: US Patent, No. 3236706, 1966.
[22] A. Mortensen, L. J. Masur, J. A. Cornie and M. C. Flemings: Metall. Trans. A, 1989, 53, 14.
[23] D. H. Yang and D. P. He: Sci. China, 2001, B44, 411.
[24] J. C. Yan, Z. W. Xu, S. X. L¨1 and S.Q. Yang:J. Mater. Sci. Technol., 2004, 20, 401.
[25] H. B. Xu, J. C. Yan and S. Q. Yang: Chin. J. Mech. Eng., 2005, 41, 152. (in Chinese)
[26] A. S. Zuruzi, H. Li and G. Dong: Mater. Sci. Eng., 1999, A270, 244.

Fabrication of Open-cell Al Foam Core Sandwich by Vibration Aided Liquid Phase Bonding Method and Its Mechanical Properties

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	H. Niu, H.C. Jiang, M.J. Zhao, L.J. Rong. Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding [J]. J. Mater. Sci. Technol., 2021, 61(0): 16-24.
[2]	Lin Chen, Mingyu Hu, Jun Guo, Xiaoyu Chong, Jing Feng. Mechanical and thermal properties of RETaO₄ (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase [J]. J. Mater. Sci. Technol., 2020, 52(0): 20-28.
[3]	Langlang Zhao, Shitong Wei, Dong Wu, Dianbao Gao, Shanping Lu. δ-ferrite transformation mechanism and its effect on mechanical properties of 316H weld metal [J]. J. Mater. Sci. Technol., 2020, 57(0): 33-42.
[4]	Jialin Wu, Li Jin, Jie Dong, Fenghua Wang, Shuai Dong. The texture and its optimization in magnesium alloy [J]. J. Mater. Sci. Technol., 2020, 42(0): 175-189.
[5]	Zhiqiang Zhang, Changshu He, Ying Li, Lei Yu, Su Zhao, Xiang Zhao. Effects of ultrasonic assisted friction stir welding on flow behavior, microstructure and mechanical properties of 7N01-T4 aluminum alloy joints [J]. J. Mater. Sci. Technol., 2020, 43(0): 1-13.
[6]	Ji Zou, Guo-Jun Zhang, Zheng-Yi Fu. In-situ ZrB₂- hBN ceramics with high strength and low elasticity [J]. J. Mater. Sci. Technol., 2020, 48(0): 186-193.
[7]	B.W. Dong, S.H. Wang, Z.Z. Dong, J.C. Jie, T.M. Wang, T.J. Li. Novel insight into dry sliding behavior of Cu-Pb-Sn in-situ composite with secondary phase in different morphology [J]. J. Mater. Sci. Technol., 2020, 40(0): 158-167.
[8]	Yujuan Li, Yingkang Wei, Xiaotao Luo, Changjiu Li, Ninshu Ma. Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits [J]. J. Mater. Sci. Technol., 2020, 40(0): 185-195.
[9]	Haijun Zhang, Chenhui Li, Philippe Djemia, Rui Yang, Qingmiao Hu. Prediction on temperature dependent elastic constants of “soft” metal Al by AIMD and QHA [J]. J. Mater. Sci. Technol., 2020, 45(0): 92-97.
[10]	S.M. Liang, H.M. Ji, X.W. Li. Thickness-dependent mechanical properties of nacre in Cristaria plicata shell: Critical role of interfaces [J]. J. Mater. Sci. Technol., 2020, 44(0): 1-8.
[11]	Wanpeng Hu, Yiming Lei, Jie Zhang, Jingyang Wang. Mechanical and thermal properties of RE₄Hf₃O₁₂ (RE=Ho, Er, Tm) ceramics with defect fluorite structure [J]. J. Mater. Sci. Technol., 2019, 35(9): 2064-2069.
[12]	Decheng Kong, Chaofang Dong, Xiaoqing Ni, Liang Zhang, Jizheng Yao, Cheng Man, Xuequn Cheng, Kui Xiao, Xiaogang Li. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes [J]. J. Mater. Sci. Technol., 2019, 35(7): 1499-1507.
[13]	D. Wang, C.T. Chi, W.Q. Wang, Y.L. Li, M.S. Wang, X.G. Chen, Z.H. Chen, X.P. Cheng, Y.J. Xie. The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17-4 PH [J]. J. Mater. Sci. Technol., 2019, 35(7): 1315-1322.
[14]	Beibei Jiang, Donghui Wen, Qing Wang, Jinda Che, Chuang Dong, Peter K. Liaw, Fen Xu, Lixian Sun. Design of near-α Ti alloys via a cluster formula approach and their high-temperature oxidation resistance [J]. J. Mater. Sci. Technol., 2019, 35(6): 1008-1016.
[15]	Qian Zhao, Zongqing Ma, Liming Yu, Huijun Li, Chenxi Liu, Chong Li, Yongchang Liu. Tailoring the secondary phases and mechanical properties of ODS steel by heat treatment [J]. J. Mater. Sci. Technol., 2019, 35(6): 1064-1073.