[1] |
Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu.
Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy
[J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
|
[2] |
Xuchen Yin, Jianrong Liu, Qingjiang Wang, Lei Wang.
Investigation of beta fleck formation in Ti-17 alloy by directional solidification method
[J]. J. Mater. Sci. Technol., 2020, 48(0): 36-43.
|
[3] |
Yucheng Ji, Chaofang Dong, Decheng Kong, Xiaogang Li.
Design materials based on simulation results of silicon induced segregation at AlSi10Mg interface fabricated by selective laser melting
[J]. J. Mater. Sci. Technol., 2020, 46(0): 145-155.
|
[4] |
Y.H. Gao, L.F. Cao, J. Kuang, J.Y. Zhang, G. Liu, J. Sun.
Dual effect of Cu on the Al3Sc nanoprecipitate coarsening
[J]. J. Mater. Sci. Technol., 2020, 37(0): 38-45.
|
[5] |
Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu.
Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification
[J]. J. Mater. Sci. Technol., 2020, 38(0): 19-27.
|
[6] |
Zhe Xue, Xinyu Zhang, Jiaqian Qin, Mingzhen Ma, Riping Liu.
Controlling the strength of Zr (10 $\bar{1}$ 2) grain boundary by nonmetallic impurities doping: A DFT study
[J]. J. Mater. Sci. Technol., 2020, 36(0): 140-148.
|
[7] |
Shuxia Wang, Chuanwei Li, Lizhan Han, Haozhang Zhong, Jianfeng Gu.
Visualization of microstructural factors resisting the crack propagation in mesosegregated high-strength low-alloy steel
[J]. J. Mater. Sci. Technol., 2020, 42(0): 75-84.
|
[8] |
Yangtao Zhou, Yuning Zan, Shijian Zheng, Xiaohong Shao, Qianqian Jin, Bo Zhang, Quanzhao Wang, Bolv Xiao, Xiuliang Ma, Zongyi Ma.
Thermally stable microstructures and mechanical properties of B4C-Al composite with in-situ formed Mg(Al)B2
[J]. J. Mater. Sci. Technol., 2019, 35(9): 1825-1830.
|
[9] |
Jing Jing, Jian He, Hongbo Guo.
Impact of Si addition on high-temperature oxidation behavior of NiAlHf alloys
[J]. J. Mater. Sci. Technol., 2019, 35(9): 2038-2047.
|
[10] |
Xuan Liu, Jilai Xue, Zhichao Guo, Cheng Zhang.
Segregation behaviors of Sc and unique primary Al3Sc in Al-Sc alloys prepared by molten salt electrolysis
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1422-1431.
|
[11] |
Anwen Zhang, Sha Zhang, Fang Liu, Feng Qi, Xiaoyu Yao, Yuanguo Tan, Dan Jia, Wenru Sun.
Effect of cooling rate on phosphorus segregation behavior and the corresponding precipitation of γ″ and γ′ phases in IN718 alloy
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1485-1490.
|
[12] |
Yuefeng Jiang, Bo Zhang, Dongying Wang, Yu Zhou, Jianqiu Wang, En-Hou Han, Wei Kea.
Hydrogen-assisted fracture features of a high strength ferrite-pearlite steel
[J]. J. Mater. Sci. Technol., 2019, 35(6): 1081-1087.
|
[13] |
Xinfeng Li, Jin Zhang, Eiji Akiyama, Qinqin Fu, Qizhen Li.
Hydrogen embrittlement behavior of Inconel 718 alloy at room temperature
[J]. J. Mater. Sci. Technol., 2019, 35(4): 499-502.
|
[14] |
Xiaoping Ma, Dianzhong Li.
The 3-dimensional morphology of dendrite during equiaxed solidification of an Al-5 wt.% Cu alloy
[J]. J. Mater. Sci. Technol., 2019, 35(3): 239-247.
|
[15] |
Y.H. Fan, B. Zhang, J.Q. Wang, E.-H. Han, W. Ke.
Effect of grain refinement on the hydrogen embrittlement of 304 austenitic stainless steel
[J]. J. Mater. Sci. Technol., 2019, 35(10): 2213-2219.
|