Computer Simulation of Mechanical Properties of Nano-scale Cu/FeS Composite

J Mater Sci Technol ›› 2010, Vol. 26 ›› Issue (4): 337-343.

• Regular Papers • Previous Articles Next Articles

Computer Simulation of Mechanical Properties of Nano-scale Cu/FeS Composite

Zhenjun Hong, Jingchao Chen, Jing Feng, Yeping Du, Jie Yu, Lijuan Zhang, Shuzhen Wu, Futai Xu

1) Key Laboratory of Advanced Materials of Precious-Nonferrous Metals, Education Ministry of China, Kunming University of Science and Technology, Kunming 650093, China
2) Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093, China

Received:2008-09-10 Revised:2009-04-10 Online:2010-04-30 Published:2010-04-28
Supported by:
the National Basic Research Program of China (973 Program) under Grant No. 2008CB617609
the National Key Project of Scientific and Technical Supporting Programs Funded by Ministry of Science & Technology of China under Grant No. 2007BAE23B02

Abstract

Abstract:

The mechanical properties of nano-scale Cu/FeS composite were simulated by molecular dynamics (MD) simulation in this paper. Through the analysis on the stress-strain curves, the results of MD simulation were in good agreement with mechanisms of macroscopic deformation. When the size of particles was smaller than a certain value, the relationship between yield strength and size, which was different from the large size crystals abided by the contrary Hall-Petch relationship. Based on the discussion of nano-scale Cu/FeS composite, some interesting conclusions were obtained. For example, the "S" type curves were discovered in stress-strain curves and the anisotropy of FeS was very evident when the exposures of reinforcing phase (FeS) were different and so on. The basic theories and calculations of the composite that contains nano-scale particles were discussed. At the same time, a new modeling building method of composites, which was close to actual experiences, were considered in this paper.

Key words: Nano-scale composite, Mechanical properties, Molecular dynamics simulation, Elastic modulus, Strain rigidity

Zhenjun Hong Jingchao Chen Jing Feng Yeping Du Jie Yu Lijuan Zhang Shuzhen Wu Futai Xu. Computer Simulation of Mechanical Properties of Nano-scale Cu/FeS Composite[J]. J Mater Sci Technol, 2010, 26(4): 337-343.

References

[1 ] M.X. Guo, M.P. Wang, Z. Li, L.F. Cao and J.Y. Cheng: Mater. Mech. Eng., 2005, 29(4), 1. (in Chinese)
[2 ] D.G. Zhao, X.F. Liu, Y.C. Pan, X.F. Bian and X.J. Liu: J. Mater. Proc. Tech., 2007, 189(1-3), 237.
[3 ] X.G. Zhu and W.M.Wang: Sci. Tech. Overseas Build. Mater., 2005, 26(4), 237. (in Chinese)
[4 ] H. Yuan, J. Qian, X.X. Wang and G.Y. Liu: Chin. Quart. Mech., 2003, 24(4), 567. (in Chinese)
[5 ] N. Xu, Y.P. Zong, F. Zhang and Y.F. Yang: J. North-eastern Univ. (Natural Science), 2007, 28(2), 213. (in Chinese)
[6 ] J. Cho and C.T. Sun: Comput. Mater. Sci., 2007, 41(1), 54.
[7 ] H. Li, F.W. Sun, Y.F. Li, X.F. Liu and K.M. Liew: Scripta Mater., 2008, 59(5), 479.
[8 ] K.H. Hoffann and M. Schreiber: Computational Physica, Springer-Verlag, Berlin Heidelberg, 1996.
[9 ] H. Rafii-Tabar: Phys. Rep., 2000, 325, 239.
[10] Y. Liu, D.B. Shan and B. Guo: J. Mater. Proc. Technol., 2007, 184(1-3), 1.
[11] P.M. Morse: Phys. Rev., 1929, 34(1), 57.
[12] F. Milstein: J. Appl. Phys., 1973, 44(9), 3825.
[13] R. Komanduri, N. Chandrasekaran and L.M. Ra? J. Mech. Sci., 2001, 43(10), 2237.
[14] J.E. Lennard-Jones: J. E. Lennard-Jones. Proc. Phys. Soc., 1931, 43(5), 461.
[15] M.R. Philpott, I.Y. Goliney and T.T. Lin: J. Chem. Phys., 2004, 120(4), 1943.
[16] W.J. Chang: Microelectron. Eng., 2003, 65(1), 239.
[17] H.J.C. Berendsen and W.F. Van Gunsteren: Proceeding of the Enrico Fermi Summer School, Varenna, Soc. Italiana de Fisica, Bologna, 1985.
[18] F.W. Sun, H. Li and X.F. Liu: Euro. Phys. Lett, 2008, 83(4), 46005.
[19] O. Hall: Proc. Phys. Soc., 1951, B64, 747.
[20] N.J. Petch: J. Iron Steel Inst., 1953, 174(5), 25.
[21] S.F. Xiao, H.Q. Deng, S.G. Chen and W.Y. Hu: Chin. J. Nonferr. Met., 2004, 14(7), 1178. (in Chinese)
[22] H. Van Swygenhoven, M. Spaczer, A. Caro and D. Farkas: Phys. Rev. B, 1999, 60(18), 22.
[23] H.L. Cox: Brit. J. Appl. Phys., 1952, 3(5), 72.
[24] V.C. Nordone and K.M. Prewo: Scripta Mater., 1986, 20(1), 43.
[25] V.C. Nordone: Scripta Mater., 1987, 21(10), 1313.
[26] J.Z. Jiang, R.K. Larsen, R. Lin, S. Morup, I. Chorkendor? K. Nielsen, K. Hansen and K. West: J. Solid State Chem., 1998, 138(1), 114.
[27] P.P. Chin, J. Ding, J.B.Yi and B.H. Lin: J. Alloy. Compd., 2005, 390(1-2), 255.

[1]	Xiaoxiao Li, Meiqiong Ou, Min Wang, Long Zhang, Yingche Ma, Kui Liu. Effect of boron addition on the microstructure and mechanical properties of K4750 nickel-based superalloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 177-185.
[2]	Lin Yuan, Jiangtao Xiong, Yajie Du, Jin Ren, Junmiao Shi, Jinglong Li. Microstructure and mechanical properties in the TLP joint of FeCoNiTiAl and Inconel 718 alloys using BNi2 filler [J]. J. Mater. Sci. Technol., 2021, 61(0): 176-185.
[3]	Hui Jiang, Dongxu Qiao, Wenna Jiao, Kaiming Han, Yiping Lu, Peter K. Liaw. Tensile deformation behavior and mechanical properties of a bulk cast Al_0.9CoFeNi₂ eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2021, 61(0): 119-124.
[4]	Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen. NbMoTiVSi_x refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure [J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7.
[5]	Yu Yin, Damon Kent, Qiyang Tan, Michael Bermingham, Ming-Xing Zhang. Spheroidization behaviour of a Fe-enriched eutectic high-entropy alloy [J]. J. Mater. Sci. Technol., 2020, 51(0): 173-179.
[6]	Yinchuan Wang, Hua Huang, Gaozhi Jia, Guizhou Ke, Jian Zhang, Guangyin Yuan. Effect of grain size on the mechanical properties of Mg foams [J]. J. Mater. Sci. Technol., 2020, 58(0): 46-54.
[7]	Jun Jiang, Pengwan Chen, Weifu Sun. Monitoring micro-structural evolution during aluminum sintering and understanding the sintering mechanism of aluminum nanoparticles: A molecular dynamics study [J]. J. Mater. Sci. Technol., 2020, 57(0): 92-100.
[8]	Jifeng Zhang, Ting Jia, Huan Qiu, Heguo Zhu, Zonghan Xie. Effect of cooling rate upon the microstructure and mechanical properties of in-situ TiC reinforced high entropy alloy CoCrFeNi [J]. J. Mater. Sci. Technol., 2020, 42(0): 122-129.
[9]	Fu-Zhi Dai, Bo Wen, Yinjie Sun, Huimin Xiang, Yanchun Zhou. Theoretical prediction on thermal and mechanical properties of high entropy (Zr_0.2Hf_0.2Ti_0.2Nb_0.2Ta_0.2)C by deep learning potential [J]. J. Mater. Sci. Technol., 2020, 43(0): 168-174.
[10]	Xingchen Xu, Daoxin Liu, Xiaohua Zhang, Chengsong Liu, Dan Liu. Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling [J]. J. Mater. Sci. Technol., 2020, 40(0): 88-98.
[11]	Qian Yan, Bo Song, Yusheng Shi. Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting [J]. J. Mater. Sci. Technol., 2020, 41(0): 199-208.
[12]	Beiping Zhou, Wencai Liu, Guohua Wu, Liang Zhang, Xiaolong Zhang, HaoJi Wen, jiang Ding. Microstructure and mechanical properties of sand-cast Mg-6Gd-3Y-0.5Zr alloy subject to thermal cycling treatment [J]. J. Mater. Sci. Technol., 2020, 43(0): 208-219.
[13]	Timothy Alexander Listyawan, Hyunjong Lee, Nokeun Park, Unhae Lee. Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process [J]. J. Mater. Sci. Technol., 2020, 57(0): 123-130.
[14]	Guanyi Jing, Wenpu Huang, Huihui Yang, Zemin Wang. Microstructural evolution and mechanical properties of 300M steel produced by low and high power selective laser melting [J]. J. Mater. Sci. Technol., 2020, 48(0): 44-56.
[15]	Feng Zhong, Huajie Wu, Yunlei Jiao, Ruizhi Wu, Jinghuai Zhang, Legan Hou, Milin Zhang. Effect of Y and Ce on the microstructure, mechanical properties and anisotropy of as-rolled Mg-8Li-1Al alloy [J]. J. Mater. Sci. Technol., 2020, 39(0): 124-134.

Computer Simulation of Mechanical Properties of Nano-scale Cu/FeS Composite

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments