Please wait a minute...
J Mater Sci Technol  2009, Vol. 25 Issue (03): 370-372    DOI:
Research Articles Current Issue | Archive | Adv Search |
Amorphous Formation in an Undercooled Binary Ni-Si Alloy under Slow Cooling Rate
Yiping Lu, Gencang Yang, Xiong Li , Yaohe Zhou
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi0an 710072, China
Download:  HTML  PDF(505KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

High undercooling up to 392 K was achieved in eutectic Ni70.2Si29.8 alloy melt by using glass fluxing combined with cyclic superheating. A small quantity of amorphous phase was obtained in bulk eutectic Ni70:2Si29:8 alloy when undercooling exceeds 240 K under slow cooling conditions (about 1 K/s). The amorphous phase was
confirmed by high-resolution transmission electron microscopy and differential scanning calorimetry.

Key words:  Eutectic alloy      Amorphous phase      Rapid solidification     
Received:  22 April 2008     
ZTFLH: 

TG27

 
Fund: 

the National Natural Science Foundation of China (No. 50395103)
the Doctorate Foundation of Northwestern Polytechnical University (CX200506)

Corresponding Authors:  LU Yi-Ping     E-mail:  luyiping80818@hotmail.com

Cite this article: 

Yiping Lu,Gencang Yang,Xiong Li,Yaohe Zhou. Amorphous Formation in an Undercooled Binary Ni-Si Alloy under Slow Cooling Rate. J Mater Sci Technol, 2009, 25(03): 370-372.

URL: 

https://www.jmst.org/EN/     OR     https://www.jmst.org/EN/Y2009/V25/I03/370

[1 ] W. Klement, R.H. Willens and P. Duwez: Nature, 1960, 187, 869.
[2 ] D.V. Louzguine, A. Takeuchi and A. Inoue: J. NonCryst. Solids., 2001, 289, 196.
[3 ] A. Inoue: Acta. Mater., 2000, 48, 279.
[4 ] B.X. Liu, W.S. Lai and Q. Zhang: Mater. Sci. Eng. R, 2000, 29, 1.
[5 ] D. Kim, B.J. Lee and N.J. Kim: Scripta Mater., 2005, 52, 969.
[6 ] H. Tan and Y. Li: Mater. Sci. Eng. A, 2007, 449-451, 63.
[7 ] W.L. Johnson: MRS Bull., 1999, 24, 42.
[8 ] A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, 63, 2342.
[9 ] X.H. Lin and W.L. Johnson: J. App. Phys., 1995, 78, 6514.
[10] G. He, J. Eckert and M. Hagiwara: J. App. Phys., 2004, 95, 1816.
[11] H. Choi-Yim, D. H. Xu and W.L. Jonson: Appl. Phys. Lett., 2003, 82, 1030.
[12] A. Inoue and B.L. Shen: Acta. Mater., 2004, 52, 4093.
[13] F.Q. Guo, S.J. Poon and G.J. Shi°et: Appl. Phys. Lett., 2003, 83, 2575.
[14] H.W. Kui, A.L. Greer and D. Turnbull: Appl. Phys. Lett., 1984, 45, 615.
[15] Y.J. Kim, R. Busch, W.L. Johnson, A.J. Rulison and W.K. Rhim: Appl. Phys. Lett., 1994, 65, 2136.
[16] A.J. Drehman, A.L. Greer and D. Turnbull: Appl. Phys. Lett., 1982, 41, 716.
[17] P. Nash and A. Nash: Phase Diagrams of Bi-nary Nickel Alloy, 2nd edn, ASM International, Phoenix/Arizona, 1991, 229-232.

[1] Xiaojun Sun, Jie He, Bin Chen, Lili Zhang, Hongxiang Jiang, Jiuzhou Zhao, Hongri Hao. Microstructure formation and electrical resistivity behavior of rapidly solidified Cu-Fe-Zr immiscible alloys[J]. 材料科学与技术, 2020, 44(0): 201-208.
[2] Ze-Tian Liu, Bing-Yu Wang, Cheng Wang, Min Zha, Guo-Jun Liu, Zhi-Zheng Yang, Jin-Guo Wang, Jie-Hua Li, Hui-Yuan Wang. Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification[J]. 材料科学与技术, 2020, 41(0): 178-186.
[3] Z.C. Luo, H.P. Wang. Primary dendrite growth kinetics and rapid solidification mechanism of highly undercooled Ti-Al alloys[J]. 材料科学与技术, 2020, 40(0): 47-53.
[4] L.M. Du, L.W. Lan, S. Zhu, H.J. Yang, X.H. Shi, P.K. Liaw, J.W. Qiao. Effects of temperature on the tribological behavior of Al0.25CoCrFeNi high-entropy alloy[J]. 材料科学与技术, 2019, 35(5): 917-925.
[5] Zhishuai Xu, Yuting Dai, Yue Fang, Zhiping Luo, Ke Han, Changjiang Song, Qijie Zhai, Hongxing Zheng. High-temperature phase transition behavior and magnetocaloric effect in a sub-rapidly solidified La-Fe-Si plate produced by centrifugal casting[J]. 材料科学与技术, 2018, 34(8): 1337-1343.
[6] Wei X.X., Xu W., Kang J.L., Ferry M., Li J.F.. Phase Selection in Solidification of Undercooled Co-B Alloys[J]. 材料科学与技术, 2017, 33(4): 352-358.
[7] Zhou Kaiyao,Tang Zhongyi,Lu Yiping,Wang Tongmin,Wang Haipeng,Li Tingju. Composition, Microstructure, Phase Constitution and Fundamental Physicochemical Properties of Low-Melting-Point Multi-Component Eutectic Alloys[J]. 材料科学与技术, 2017, 33(2): 131-154.
[8] Yulin Liu, Lei Luo, Chaofei Han, Liangyun Ou, Jijie Wang, Chunzhong Liu. Effect of Fe, Si and Cooling Rate on the Formation of Fe- and Mn-rich Intermetallics in Al-5Mg-0.8Mn Alloy[J]. J. Mater. Sci. Technol., 2016, 32(4): 305-313.
[9] Hongjie Jiang, Shanshan Cao, Changbo Ke, Xiao Ma, Xinping Zhang. Fine-Grained Bulk NiTi Shape Memory Alloy Fabricated by Rapid Solidification Process and Its Mechanical Properties and Damping Performance[J]. J. Mater. Sci. Technol., 2013, 29(9): 855-862.
[10] Na Li, Junwei Zhang, Qian Xu, Lulu Zhai, Shengli Li, Jiguang Li. Rapidly Solidified Steel Droplets with B and P Addition[J]. J. Mater. Sci. Technol., 2013, 29(10): 995-998.
[11] Nan Wang, Ruining Yang, Wenjing Yao, Jinfeng Xu, Xixing Wen. Interactive Effect of Grain Orientation and Grain Size on Magnetic Properties of Fe-78 wt% Ni Ribbons[J]. J. Mater. Sci. Technol., 2012, 28(9): 833-836.
[12] Zhenya Zhang, Huashun Yu, Shaoqing Wang, Haitao Wang, Guanghui Min. Microstructure and Tensile Properties of ZK60 Alloy Fabricated by Simplified Rapid Solidification Powder Metallurgy (S-RS P/M) Process[J]. J. Mater. Sci. Technol., 2010, 26(2): 151-155.
[13] Juanhua Su,Fengzhang Ren,Baohong Tian,Pin Liu,Qiming Dong. Aging Strengthening in Rapidly Solidified Cu-Cr-Sn- Zn Alloy[J]. J. Mater. Sci. Technol., 2009, 25(02): 230-232.
[14] Jiuzhou ZHAO, Lingling GAO, Jie HE, L.Ratke. Effect of Brownian Coagulation on the Liquid-liquid Decomposition in Gas-atomized Alloy Drops[J]. J. Mater. Sci. Technol., 2006, 22(03): 321-323.
[15] Jiuchun YAN, Zhiwu XU, Shixiong LÜ, Shiqin YANG. Microstructure Characteristics of Interaction Layer of Zn-Al Eutectic Alloy with Al2O3p/6061Al Composites[J]. J. Mater. Sci. Technol., 2004, 20(04): 401-404.
No Suggested Reading articles found!
ISSN: 1005-0302
CN: 21-1315/TG
Home
About JMST
Privacy Statement
Terms & Conditions
Editorial Office: Journal of Materials Science & Technology , 72 Wenhua Rd.,
Shenyang 110016, China
Tel: +86-24-83978208
E-mail:JMST@imr.ac.cn

Copyright © 2016 JMST, All Rights Reserved.