J. Mater. Sci. Technol. ›› 2006, Vol. 22 ›› Issue (06): 755-758.

• Research Articles • Previous Articles     Next Articles

Solidification Structure of Low Carbon Steel Strips with Different Phosphorus Contents Produced by Strip Casting

Na LI, Zhenyu LIU, Yiqing QIU, Zhaosen LIN, Xianghua LIU, Guodong WANG   

  1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2005-11-11 Revised:2006-03-16 Online:2006-11-28 Published:2009-10-10
  • Contact: Na Li

Abstract:

In the present paper, low carbon steel strips with different phosphorus contents were produced using a twin roll strip casting process. The solidification structure was studied and its features were analyzed in detail. It was found that the strips possessed a fine microstructure compared with the mould cast steels. With increasing phosphorus content more ferrite has been formed with finer grains.

Key words: hosphorus, Solidification structure, Strip casting, Low carbon steel