[1] |
Xiong-jie Gu, Wei-li Cheng, Shi-ming Cheng, Yan-hui Liu, Zhi-feng Wang, Hui Yu, Ze-qin Cui, Li-fei Wang, Hong-xia Wang.
Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion
[J]. J. Mater. Sci. Technol., 2021, 60(0): 77-89.
|
[2] |
Jianwei Tang, Liang Chen, Guoqun Zhao, Cunsheng Zhang, Xingrong Chu.
Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die
[J]. J. Mater. Sci. Technol., 2020, 47(0): 88-102.
|
[3] |
Xueze Jin, Wenchen Xu, Zhongze Yang, Can Yuan, Debin Shan, Bugang Teng, Bo Cheng Jin.
Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy
[J]. J. Mater. Sci. Technol., 2020, 45(0): 133-145.
|
[4] |
Jongbin Go, Jong Un Lee, Hui Yu, Sung Hyuk Park.
Influence of Bi addition on dynamic recrystallization and precipitation behaviors during hot extrusion of pure Mg
[J]. J. Mater. Sci. Technol., 2020, 44(0): 62-75.
|
[5] |
Yu Zhang, Wei Rong, Yujuan Wu, Liming Peng.
Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation
[J]. J. Mater. Sci. Technol., 2020, 54(0): 160-170.
|
[6] |
Sang-Hoon Kim, Sang Won Lee, Byoung Gi Moon, Ha Sik Kim, Sung Hyuk Park.
Variation in dynamic deformation behavior and resultant yield asymmetry of AZ80 alloy with extrusion temperature
[J]. J. Mater. Sci. Technol., 2020, 46(0): 225-236.
|
[7] |
Chenxu Zhanga, Yu-Ping Zeng, Dongxu Yao, Jinwei Yin, Kaihui Zuo, Yongfeng Xia, Hanqin Liang.
The improved mechanical properties of Al matrix composites reinforced with oriented β-Si3N4 whisker
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1345-1353.
|
[8] |
Li Liu, Jian-Tang Jiang, Bo Zhang, Wen-Zhu Shao, Liang Zhen.
Enhancement of strength and electrical conductivity for a dilute Al-Sc-Zr alloy via heat treatments and cold drawing
[J]. J. Mater. Sci. Technol., 2019, 35(6): 962-971.
|
[9] |
Zi-You Ding, Lan-Yue Cui, Rong-Chang Zeng, Yan-Bin Zhao, Shao-Kang Guan, Dao-Kui Xu, Cun-Guo Lin.
Exfoliation corrosion of extruded Mg-Li-Ca alloy
[J]. J. Mater. Sci. Technol., 2018, 34(9): 1550-1557.
|
[10] |
Mohamed M. El-Sayed Seleman, Mohamed M.Z. Ahmed, Sabbah Ataya.
Microstructure and mechanical properties of hot extruded 6016 aluminum alloy/graphite composites
[J]. J. Mater. Sci. Technol., 2018, 34(9): 1580-1591.
|
[11] |
Y.K. Zhu, Q.Y. Chen, Q. Wang, H.Y. Yu, R. Li, J.P. Hou, Z.J. Zhang, G.P. Zhang, Z.F. Zhang.
Effect of stress profile on microstructure evolution of cold-drawn commercially pure aluminum wire analyzed by finite element simulation
[J]. J. Mater. Sci. Technol., 2018, 34(7): 1214-1221.
|
[12] |
Hansi Jiang, Xiaoguang Qiao, Chao Xu, Shigeharu Kamado, Kun Wu, Mingyi Zheng.
Influence of size and distribution of W phase on strength and ductility of high strength Mg-5.1Zn-3.2Y-0.4Zr-0.4Ca alloy processed by indirect extrusion
[J]. J. Mater. Sci. Technol., 2018, 34(2): 277-283.
|
[13] |
Chaoqiang Liu, Chenglong Liu, Houwen Chen, Jian-Feng Nie.
Heat-treatable Mg-9Al-6Sn-3Zn extrusion alloy
[J]. J. Mater. Sci. Technol., 2018, 34(2): 284-290.
|
[14] |
Guosong Han, Ding Chen, Gang Chen, Jianghua Huang.
Development of non-flammable high strength extruded Mg-Al-Ca-Mn alloys with high Ca/Al ratio
[J]. J. Mater. Sci. Technol., 2018, 34(11): 2063-2068.
|
[15] |
Ling Wang, Yiquan Zhao, Jing Zhang, Ru Ma, Yandong Liu, Yinong Wang, Qun Zhang, Weigang Li, Yuan Zhang.
Quantitative analysis on friction stress of hot-extruded AZ31 magnesium alloy at room temperature
[J]. J. Mater. Sci. Technol., 2018, 34(10): 1765-1772.
|