Rheological Behaviour of Steel ZG15CrMoV and Carbon Steel 35 at High Temperatures

]*>","")" /> Rheological Behaviour of Steel ZG15CrMoV and Carbon Steel 35 at High Temperatures

Search for articles:

J Mater Sci Technol ›› 1992, Vol. 8 ›› Issue (3): 225-228.

• Articles • Previous Articles Next Articles

Rheological Behaviour of Steel ZG15CrMoV and Carbon Steel 35 at High Temperatures

XU Dong AN Geying LI Qingchun Institute of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai,200030,ChinaDept.of Metallic Materials and Technology,Harbin Institute of Technology,Harbin,150006,ChinaTo whom correspondence should be ad

Received:1992-05-28 Revised:1992-05-28 Online:1992-05-28 Published:2009-10-10

Abstract

XU Dong AN Geying LI Qingchun Institute of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai,200030,ChinaDept.of Metallic Materials and Technology,Harbin Institute of Technology,Harbin,150006,ChinaTo whom correspondence should be ad. Rheological Behaviour of Steel ZG15CrMoV and Carbon Steel 35 at High Temperatures[J]. J Mater Sci Technol, 1992, 8(3): 225-228.

About JMST

Authors and reviewers

Contact

WeChat

[1]	H. Niu, H.C. Jiang, M.J. Zhao, L.J. Rong. Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding [J]. J. Mater. Sci. Technol., 2021, 61(0): 16-24.
[2]	Jiawei Ding, Haitao Wang, En-Hou Han. A multiphysics model for studying transient crevice corrosion of stainless steel [J]. J. Mater. Sci. Technol., 2021, 60(0): 186-196.
[3]	Pan Xie, Shucheng Shen, Cuilan Wu, Jianghua Chen. Abnormal orientation relation between fcc and hcp structures revealed in a deformed high manganese steel [J]. J. Mater. Sci. Technol., 2021, 60(0): 156-161.
[4]	Qiang Ren, Yuexin Zhang, Ying Ren, Lifeng Zhang, Jujin Wang, Yadong Wang. Prediction of spatial distribution of the composition of inclusions on the entire cross section of a linepipe steel continuous casting slab [J]. J. Mater. Sci. Technol., 2021, 61(0): 147-158.
[5]	Hu Liu, Jie Wei, Junhua Dong, Yiqing Chen, Yumin Wu, Yangtao Zhou, Subedi Dhruba Babu, Wei Ke. Influence of cementite spheroidization on relieving the micro-galvanic effect of ferrite-pearlite steel in acidic chloride environment [J]. J. Mater. Sci. Technol., 2021, 61(0): 234-246.
[6]	Guanyi Jing, Wenpu Huang, Huihui Yang, Zemin Wang. Microstructural evolution and mechanical properties of 300M steel produced by low and high power selective laser melting [J]. J. Mater. Sci. Technol., 2020, 48(0): 44-56.
[7]	Seok Gyu Lee, Bohee Kim, Min Cheol Jo, Kyeong-Min Kim, Junghoon Lee, Jinho Bae, Byeong-Joo Lee, Seok Su Sohn, Sunghak Lee. Effects of Cr addition on Charpy impact energy in austenitic 0.45C-24Mn-(0,3,6)Cr steels [J]. J. Mater. Sci. Technol., 2020, 50(0): 21-30.
[8]	Hanghang Liu, Paixian Fu, Hongwei Liu, Yanfei Cao, Chen Sun, Ningyu Du, Dianzhong Li. Effects of Rare Earth elements on microstructure evolution and mechanical properties of 718H pre-hardened mold steel [J]. J. Mater. Sci. Technol., 2020, 50(0): 245-256.
[9]	Bintao Wu, Zhijun Qiu, Zengxi Pan, Kristin Carpenter, Tong Wang, Donghong Ding, Stephen Van Duin, Huijun Li. Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy [J]. J. Mater. Sci. Technol., 2020, 52(0): 226-234.
[10]	Wei Li, Martina Vittorietti, Geurt Jongbloed, Jilt Sietsma. The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel [J]. J. Mater. Sci. Technol., 2020, 45(0): 35-43.
[11]	Chenfan Yu, Peng Zhang, Zhefeng Zhang, Wei Liu. Microstructure and fatigue behavior of laser-powder bed fusion austenitic stainless steel [J]. J. Mater. Sci. Technol., 2020, 46(0): 191-200.
[12]	Huihong Liu, Yo Aoki, Yasuhiro Aoki, Kohsaku Ushioda, Hidetoshi Fujii. Principle for obtaining high joint quality in dissimilar friction welding of Ti-6Al-4V alloy and SUS316L stainless steel [J]. J. Mater. Sci. Technol., 2020, 46(0): 211-224.
[13]	Juan Hou, Wei Chen, Zhuoer Chen, Kai Zhang, Aijun Huang. Microstructure, tensile properties and mechanical anisotropy of selective laser melted 304L stainless steel [J]. J. Mater. Sci. Technol., 2020, 48(0): 63-71.
[14]	Jo Min Chul, Jisung Yoo, Jo Min Cheol, Alireza Zargaran, Sohn Seok Su, Kim Nack J., Sunghak Lee. Effects of Cu addition on formability and surface delamination phenomenon in high-strength high-Mn steels [J]. J. Mater. Sci. Technol., 2020, 43(0): 44-51.
[15]	Luhan Hao, Xiang Ji, Guangqian Zhang, Wei Zhao, Mingyue Sun, Yan Peng. Carbide precipitation behavior and mechanical properties of micro-alloyed medium Mn steel [J]. J. Mater. Sci. Technol., 2020, 47(0): 122-130.

Rheological Behaviour of Steel ZG15CrMoV and Carbon Steel 35 at High Temperatures

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments