J Mater Sci Technol ›› 2007, Vol. 23 ›› Issue (05): 623-628.

• Research Articles • Previous Articles     Next Articles

Role of Chloride Ion and Dissolved Oxygen in Electrochemical Corrosion of AA5083-H321 Aluminum-Magnesium Alloy in NaCl Solutions under Flow Conditions

K.Jafarzadeh, T.Shahrabi, S.M.M.Hadavi, M.G.Hosseini   

  1. Department of Materials Engineering. Tarbiat Modares University, Tehran, Iran...
  • Received:2006-09-06 Revised:2006-12-25 Online:2007-09-28 Published:2009-10-10
  • Contact: T.Shahrabi

Abstract: Flow-induced corrosion consists electrochemical and mechanical components. The present paper has to assessed the role of chloride ion and dissolved oxygen in the electrochemical component of flow induced corrosion for AA5083-H321 aluminum-magnesium alloy which is extensively used in the construction of high-speed boats, submarines, hovercrafts, and desalination systems, in NaCl solutions. Electrochemical tests were carried out at flow velocities of 0, 2, 5, 7 and 10 m/s, in aerated and deaerated NaCl solutions with different sodium chloride concentrations. The results showed that the high rate of oxygen reduction under hydrodynamic conditions causes an increase in the density of pits on the surface. The increase of chloride ions concentration under flow conditions accelerates the rate of anodic reactions, but have no influence on the cathodic reactions. Thus, in the current work, it was found that under flow conditions, due to the elimination of corrosion products inside the pits, corrosion resistance of the alloy is increased.

Key words: Corrosion, Flow, NaCl solution, AA5083-H321 aluminum-magnesium alloy, Chloride ion, Oxygen