Evolution of Pore Size Distribution and Mean Pore Sizein Lotus-type Porous Magnesium Fabricated with Gasar Process

J Mater Sci Technol ›› 2006, Vol. 22 ›› Issue (03): 306-310.

• Research Articles • Previous Articles Next Articles

Evolution of Pore Size Distribution and Mean Pore Sizein Lotus-type Porous Magnesium Fabricated with Gasar Process

Yuan LIU, Yanxiang LI, Huawei ZHANG, Jiang WAN

Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China

Received:2005-02-24 Revised:2005-07-05 Online:2006-05-28 Published:2009-10-10
Contact: Yuan LIU

Abstract

Abstract: The effect of gas pressures on the mean pore size, the porosity and the pore size distribution of lotus-type porous magnesium fabricated with Gasar process were investigated. The theoretical analysis and the experimental results all indicate that there exists an optimal ratio of the partial pressures of hydrogen pH2 to argon pAr for producing lotus-type structures with narrower pore size distribution and smaller pore size. The effect of solidification mode on the pore size distribution and pore size was also discussed.

Key words: Porous metal, Lotus-type structure, Gasar process

Yuan LIU, Yanxiang LI, Huawei ZHANG, Jiang WAN. Evolution of Pore Size Distribution and Mean Pore Sizein Lotus-type Porous Magnesium Fabricated with Gasar Process[J]. J Mater Sci Technol, 2006, 22(03): 306-310.

[1]	Dianguo Ma, Yingmin Wang, Yanhui Li, Umetsu Rie Y., Shuli Ou, Kunio Yubuta, Wei Zhang. Structure and properties of nanoporous FePt fabricated by dealloying a melt-spun Fe₆₀Pt₂₀B₂₀ alloy and subsequent annealing [J]. J. Mater. Sci. Technol., 2020, 36(0): 128-133.
[2]	Xianglong Lu, Tianshui Yu, Hailing Wang, Lihua Qian, Ruichun Luo, Pan Liu, Yao Yu, Lin Liu, Pengxiang Lei, Songliu Yuan. Nanoporous Au-Sn with solute strain for simultaneously enhanced selectivity and durability during electrochemical CO₂ reduction [J]. J. Mater. Sci. Technol., 2020, 43(0): 154-160.
[3]	Chaoyang Wang, Shengli Zhu, Yanqin Liang, Zhenduo Cui, Shuilin Wu, Chunling Qin, Shuiyuan Luo, Akihisa Inoue. Understanding the macroscopical flexibility/fragility of nanoporous Ag: Depending on network connectivity and micro-defects [J]. J. Mater. Sci. Technol., 2020, 53(0): 91-101.
[4]	Chuanbing Zhuang, Zhigang Xu, Shangyu Huang, Yu Xia, Chuanbin Wang, Qiang Shen. In situ synthesis of a porous high-Mn and high-Al steel by a novel two-step pore-forming technique in vacuum sintering [J]. J. Mater. Sci. Technol., 2020, 39(0): 82-88.
[5]	Y.Z. Chen, X.Y. Ma, W.X. Zhang, H. Dong, G.B. Shan, Y.B. Cong, C. Li, C.L. Yang, F. Liu. Effects of dealloying and heat treatment parameters on microstructures of nanoporous Pd [J]. J. Mater. Sci. Technol., 2020, 48(0): 123-129.
[6]	Emese Lantos, László Mérai, Ágota Deák, Juan Gómez-Pérez, Dániel Sebők, Imre Dékány, Zoltán Kónya, László Janovák. Preparation of sulfur hydrophobized plasmonic photocatalyst towards durable superhydrophobic coating material [J]. J. Mater. Sci. Technol., 2020, 41(0): 159-167.
[7]	X.L.Gong, Y.Liu, S.Y.He, J.Lu. Manufacturing and Low-Velocity Impact Response of a New Composite Material: Metal Porous Polymer Composite (MPPC) [J]. J Mater Sci Technol, 2004, 20(Supl.): 65-68.
[8]	Peisheng LIU, Bing YU, Anmin HU, Kaiming LIANG, Shouren GU. Techniques for the Preparation of Porous Metals [J]. J Mater Sci Technol, 2002, 18(04): 299-305.

Evolution of Pore Size Distribution and Mean Pore Sizein Lotus-type Porous Magnesium Fabricated with Gasar Process

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments