[1] |
Wei Hu, Zhongwei Ma, Shude Ji, Qi Song, Mingfei Chen, Wenhui Jiang.
Improving the mechanical property of dissimilar Al/Mg hybrid friction stir welding joint by PIO-ANN
[J]. J. Mater. Sci. Technol., 2020, 53(0): 41-52.
|
[2] |
Wandong Xing, Zijie Wei, Rong Yu, Fanyan Meng.
Prediction of stable high-pressure structures of tantalum nitride TaN2
[J]. J. Mater. Sci. Technol., 2019, 35(10): 2297-2304.
|
[3] |
Jiewen Wang, Shuyuan Zhang, Ziqing Sun, Hai Wang, Ling Ren, Ke Yang.
Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant
[J]. J. Mater. Sci. Technol., 2019, 35(10): 2336-2344.
|
[4] |
Wei X.X., Xu W., Kang J.L., Ferry M., Li J.F..
Phase Selection in Solidification of Undercooled Co-B Alloys
[J]. J. Mater. Sci. Technol., 2017, 33(4): 352-358.
|
[5] |
Sascha Vongehr, Shaochun Tang, Xiangkang Meng.
Adapting Nanotech Research as Nano-Micro Hybrids Approach Biological Complexity, A Review
[J]. J. Mater. Sci. Technol., 2016, 32(5): 387-401.
|
[6] |
Jun Chen, Yingwei Song, Dayong Shan, En-Hou Han.
In Situ Growth Process of Mg-Al Hydrotalcite Conversion Film on AZ31 Mg Alloy
[J]. J. Mater. Sci. Technol., 2015, 31(4): 384-390.
|
[7] |
Lijian Pan,Boming Zhang,Fuhong Dai.
Multi-objective Optimization of Co-cured Composite Laminates with Embedded Viscoelastic Damping Layer
[J]. J Mater Sci Technol, 2009, 25(05): 708-712.
|
[8] |
Weiyan LÜ, Lin LI, Li WANG, Yanlin HE, Shuigen HUANG.
Thermodynamic Assessment and Experimental Investigation of Fe-Al-C System
[J]. J Mater Sci Technol, 2008, 24(05): 771-774.
|
[9] |
Kee-Hyeon Cho, Byung-Moon Kim.
Numerical Analysis of Secondary Cooling in Continuous Slab Casting
[J]. J Mater Sci Technol, 2008, 24(03): 389-390.
|
[10] |
Zhizhong SUN, Henry HU, Xiang CHEN, Qigui WANG, Wenying YANG.
Gating System Design for a Magnesium Alloy Casting
[J]. J Mater Sci Technol, 2008, 24(01): 93-95.
|
[11] |
Huiping YU, Yunkan SUI, Jing WANG, Fengyi ZHANG, Xiaolin DAI.
Optimal Control of Oxygen Concentration in a Magnetic Czochralski Crystal Growth by Response Surface Methodology
[J]. J Mater Sci Technol, 2006, 22(02): 173-178.
|
[12] |
K.Palanikumar, L.Karunamoorthy, R.Karthikeyan.
Parametric Optimization to Minimise the Surface Roughnesson the Machining of GFRP Composites
[J]. J Mater Sci Technol, 2006, 22(01): 66-72.
|
[13] |
Shenfang YUAN, Yingdi XU, Ge PENG.
New Developments in Structural Health Monitoring Based on Diagnostic Lamb Wave
[J]. J Mater Sci Technol, 2004, 20(05): 490-496.
|
[14] |
K.Palanikumar, L.Karunamoorthy, R.Karthikeyan.
Optimizing the Machining Parameters for Minimum Surface Roughness in Turning of GFRP Composites Using Design of Experiments
[J]. J Mater Sci Technol, 2004, 20(04): 373-378.
|
[15] |
Juhua HUANG, Jinjun RAO, Xuefeng LI.
Study on Process Parameters Optimization of Sheet Metal Forming Based on PFEA/ANN/GA
[J]. J Mater Sci Technol, 2003, 19(Supl.): 9-12.
|