Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloyin process parameter selection of pulsed current gas tungsten arc welding of titanium alloy

J Mater Sci Technol ›› 2008, Vol. 24 ›› Issue (03): 423-426.

• Research Articles • Previous Articles Next Articles

Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloyin process parameter selection of pulsed current gas tungsten arc welding of titanium alloy

M.Balasubramanian, V.Jayabalan, V.Balasubramanian

Department of Mechanical Engineering, Maamallan Institute of Technology, India...

Received:2007-07-17 Revised:2007-08-25 Online:2008-05-28 Published:2009-10-10
Contact: M.Balasubramanian

Abstract

Abstract: The selection of process parameters for obtaining optimal tensile properties in the pulsed current gas tungsten arc welding is presented. The tensile properties include ultimate tensile strength, yield strength and notch tensile strength. All these characteristics are considered together in the selection of process parameters by modified taguchi method to analyse the effect of each welding process parameter on tensile properties. Experimental results are furnished to illustrate the approach.

Key words: Pulsing current, Modified taguchi method, Tensile properties

M.Balasubramanian, V.Jayabalan, V.Balasubramanian. Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloyin process parameter selection of pulsed current gas tungsten arc welding of titanium alloy[J]. J Mater Sci Technol, 2008, 24(03): 423-426.

[1]	B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng, T.F. Xi. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys [J]. J. Mater. Sci. Technol., 2021, 60(0): 44-55.
[2]	Ruifeng Dong, Jinshan Li, Hongchao Kou, Jiangkun Fan, Yuhong Zhao, Hua Hou, Li Wu. ω-Assisted refinement of α phase and its effect on the tensile properties of a near β titanium alloy [J]. J. Mater. Sci. Technol., 2020, 44(0): 24-30.
[3]	Qiuju Zheng, Lili Zhang, Hongxiang Jiang, Jiuzhou Zhao, Jie He. Effect mechanisms of micro-alloying element La on microstructure and mechanical properties of hypoeutectic Al-Si alloys [J]. J. Mater. Sci. Technol., 2020, 47(0): 142-151.
[4]	S.G. Wang, M. Sun, S.Y. Liu, X. Liu, Y.H. Xu, C.B. Gong, K. Long, Z.D. Zhang. Synchronous optimization of strengths, ductility and corrosion resistances of bulk nanocrystalline 304 stainless steel [J]. J. Mater. Sci. Technol., 2020, 37(0): 161-172.
[5]	Huiting Zheng, Ruirun Chen, Gang Qin, Xinzhong Li, Yanqing Su, Hongsheng Ding, Jingjie Guo, Hengzhi Fu. Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification [J]. J. Mater. Sci. Technol., 2020, 38(0): 19-27.
[6]	Chao Cai, Xu Wu, Wan Liu, Wei Zhu, Hui Chen, Jasper Chua Dong Qiu, Chen-Nan Sun, Jie Liu, Qingsong Wei, Yusheng Shi. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance [J]. J. Mater. Sci. Technol., 2020, 57(0): 51-64.
[7]	B. Zhou, D. Wu, R.S. Chen, En-hou Han. Enhanced tensile properties in a Mg-6Gd-3Y-0.5Zr alloy due to hot isostatic pressing (HIP) [J]. J. Mater. Sci. Technol., 2019, 35(9): 1860-1868.
[8]	Lingyang Yuan, Liming Peng, Jingyu Han, Baoliang Liu, Yujuan Wu, Juan Chen. Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy [J]. J. Mater. Sci. Technol., 2019, 35(6): 1017-1026.
[9]	Wenyuan Li, Zhiyong Chen, Jianrong Liu, Shaoxiang Zhu, Guoxin Sui, Qingjiang Wang. Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate [J]. J. Mater. Sci. Technol., 2019, 35(5): 790-798.
[10]	Yaoli Zhang, Jinguo Li, Xinguang Wang, Yiping Lu, Yizhou Zhou, Xiaofeng Sun. The interaction and migration of deformation twin in an eutectic high-entropy alloy AlCoCrFeNi_2.1 [J]. J. Mater. Sci. Technol., 2019, 35(5): 902-906.
[11]	Lijie Zuo, Bing Ye, Jian Feng, Xiangyang Kong, Haiyan Jiang, Wenjiang Ding. Microstructure, tensile properties and creep behavior of Al-12Si-3.5Cu-2Ni-0.8Mg alloy produced by different casting technologies [J]. J. Mater. Sci. Technol., 2018, 34(7): 1222-1228.
[12]	Jian Liu, Jia Li, Xu Cheng, Huaming Wang. Microstructures and tensile properties of laser cladded AerMet100 steel coating on 300 M steel [J]. J. Mater. Sci. Technol., 2018, 34(4): 643-652.
[13]	Sang-HoonKim, Jong UnLee, Ye JinKim, Jun HoBae, Bong SunYou, Sung HyukPark. Accelerated precipitation behavior of cast Mg-Al-Zn alloy by grain refinement [J]. J. Mater. Sci. Technol., 2018, 34(2): 265-276.
[14]	Wencai Liu, Shi Feng, Zhongquan Li, Jiong Zhao, Guohua Wu, Xianfei Wang, Lv Xiao, Wenjiang Ding. Effect of rolling strain on microstructure and tensile properties of dual-phase Mg-8Li-3Al-2Zn-0.5Y alloy [J]. J. Mater. Sci. Technol., 2018, 34(12): 2256-2262.
[15]	Yi-jun Li, Rui-dong Fu, Yan Li, Yan Peng, Hui-jie Liu. Tensile properties and fracture behavior of friction stir welded joints of Fe-32Mn-7Cr-1Mo-0.3N steel at cryogenic temperature [J]. J. Mater. Sci. Technol., 2018, 34(1): 157-162.

Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloyin process parameter selection of pulsed current gas tungsten arc welding of titanium alloy

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments