Abstract: Similar to other metallic materials, duplex stainless steel dramatically loses its advantage of high ductility as they are strengthened. Here, we produce a gradient nanograined dual-phase structure in the 2101 duplex stainless steel, thus facilitating a superior strength-ductility synergy: a yield strength of 1009.5 MPa being two times higher than that of the as-received sample, a total elongation of 23.4% and a uniform elongation of 5.9%. This novel structure is produced through a processing route of ultrasonic severe surface rolling and annealing, which realizes a superposition of gradient nanostructure and lamellar dual-phase structure with austenite and ferrite. During the tension deformation of gradient nanograined dual-phase structured duplex stainless steel, a significant accumulation of geometrically necessary dislocations occurs. These dislocations are formed to accommodate the deformation incompatibility caused by the layer-by-layer difference in strength and hardness of individual phase domains, as well as the inherent difference in properties between the austenite and ferrite domains. This results in a stronger hetero-deformation induced strengthening and hardening significantly contributing to superior mechanical properties. Our study provides a new avenue to develop advanced steels with high strength and ductility.

Key words: Gradient structure, Duplex stainless steel, Synergetic strengthening, Strength, Ductility