J. Mater. Sci. Technol. ›› 2020, Vol. 54: 31-39.DOI: 10.1016/j.jmst.2020.03.042
• Research Article • Previous Articles Next Articles
Silu Liua, Y.Z. Guob, Z.L. Panc, X.Z. Liaod, E.J. Laverniae, Y.T. Zhuf,a, Q.M. Weic, Yonghao Zhaoa,*()
Received:
2020-01-15
Revised:
2020-03-09
Accepted:
2020-03-13
Published:
2020-10-01
Online:
2020-10-21
Contact:
Yonghao Zhao
Silu Liu, Y.Z. Guo, Z.L. Pan, X.Z. Liao, E.J. Lavernia, Y.T. Zhu, Q.M. Wei, Yonghao Zhao. Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal[J]. J. Mater. Sci. Technol., 2020, 54: 31-39.
Fig. 1. Schematic diagrams of the material fabrication process and sample coordinate system. (a) The extrusion process with the green arrow indicating the extrusion direction (ED). (b) The equal channel angular pressing (ECAP) process with the sample coordinate system, in which the red, green and blue arrows represent the transverse direction (TD), extrusion direction (ED) and normal direction (ND), respectively.
Fig. 2. Engineering strain-stress curves of Extruded-GM (blue line) and ECAP-GM (red line). The black triangles marked the ends of the stress plateaus.
End point of peak stress plateau | 20% engineering strain | |||||||
---|---|---|---|---|---|---|---|---|
Engineeringstress (MPa) | Engineering strain (%) | True stress (MPa) | True strain (%) | Engineering stress (MPa) | Engineering strain (%) | True stress (MPa) | True strain (%) | |
Extruded-GM | 1212 | 8.6 | 1108 | 8.2 | 679 | 20.0 | 543 | 18.3 |
ECAP-GM | 1381 | 11.0 | 1228 | 10.5 | 1008 | 20.0 | 806 | 18.3 |
Table 1 Mechanical parameters from engineering and true stress-strain curves of the impacted Extruded-GM and ECAP-GM specimens.
End point of peak stress plateau | 20% engineering strain | |||||||
---|---|---|---|---|---|---|---|---|
Engineeringstress (MPa) | Engineering strain (%) | True stress (MPa) | True strain (%) | Engineering stress (MPa) | Engineering strain (%) | True stress (MPa) | True strain (%) | |
Extruded-GM | 1212 | 8.6 | 1108 | 8.2 | 679 | 20.0 | 543 | 18.3 |
ECAP-GM | 1381 | 11.0 | 1228 | 10.5 | 1008 | 20.0 | 806 | 18.3 |
Fig. 3. (a) The IPF-Z orientation map from the ED-TD plane of Extruded-GM, inset is the IPF-Z coloring code; (b) inverse pole figures of (a); (c) the zoom-in view and local misorientation map of Extruded-GM, blue, green and red colors in the rainbow bar represent low (<?1°), medium (from 1° to 3°) and high (from 3° to 5°) misorientations; (d) GBs displayed on (c); (e) the recrystallization map of (c), blue, yellow, red colors indicate recrystallized, substructured and deformed areas, respectively.
Fig. 5. (a, b) The IPF-Z orientation maps of areas crossed by ASBs from the ND-TD plane of Extruded-GM-DY and ECAP-GM-DY, respectively [1]. The transition areas were enveloped by dashed lines and highlighted by “T”.
Fig. 6. (a, c) The zoom-in views of areas in the ASBs of Extruded-GM-DY and ECAP-GM-DY; (b, d) the grain size distributions in the ASBs of Extruded-GM-DY and ECAP-GM-DY.
Fig. 7. (a, c) Pole figures of the ASBs in Extruded-GM-DY and ECAP-GM-DY, SD and NSP represent shear direction and the direction being normal to shear plane; (b, d) pole figures of matrix areas in Extruded-GM-DY and ECAP-GM-DY.
Fig. 8. (a, b) The local misorientation maps of the ASBs of Extruded-GM-DY and ECAP-GM-DY; (c, e) GB distributions of matrix areas in Extruded-GM-DY and ECAP-GM-DY; (d, f) GB distributions of ASBs in Extruded-GM-DY and ECAP-GM-DY.
Fig. 9. (a, b) The recrystallization maps of the ASBs of Extruded-GM-DY and ECAP-GM-DY; (c, d) statistic fractions of recrystallized area (Recryst.), substructured area (Sub.) and deformed area (Defor.) in Fig. 9(a, b).
Fig. 10. (a) The temperature versus engineering strain of Extruded-GM-DY (blue line) and ECAP-GM-DY (red line) and (b) the temperature (T) vs time of Extruded-GM-DY (blue line) and ECAP-GM-DY (red line).
[1] | S.L. Liu, Z.L. Pan, Y.H. Zhao, T. Topping, R.Z. Valiev, X.Z. Liao, E.J. Lavernia, Y.T Zhu, Q. Wei, Acta Mater. 132 (2017) 193-208. |
[2] |
T. Saito, Science 300 (2003) 464-467.
URL PMID |
[3] | J.P. Liu, Y.D. Wang, Y.L. Hao, Y. Wang, Z.H. Nie, D. Wang, Y. Ren, Z.P. Lu, J. Wang, H. Wang, X. Hui, N. Lu, M.J. Kim, R. Yang, Sci. Rep. 3 (2013) 1-7. |
[4] | T. Furuta, S. Kuramoto, J.W. Morris, N. Nagasako, E. Withey, D.C. Chrzan, Scr. Mater. 68 (2013) 767-772. |
[5] | K.Y. Xie, Y. Wang, Y. Zhao, L. Chang, G. Wang, Z. Chen, Y. Cao, X. Liao, E.J. Lavernia, R.Z. Valiev, B. Sarrafpour, H. Zoellner, S.P. Ringer, Mater. Sci. Eng. C 33 (2013) 3530-3536. |
[6] |
Y.L. Hao, S.J. Li, S.Y. Sun, C.Y. Zheng, R. Yang, Acta Biomater. 3 (2007) 277-286.
URL PMID |
[7] |
T. Li, J.W. Morris, N. Nagasako, S. Kuramoto, D.C. Chrzan, Phys. Rev. Lett. 98 (2007), 105503.
URL PMID |
[8] | M.Y. Gutkin, T. Ishizaki, S. Kuramoto, I.A. Ovid’ko, N.V. Skiba, Int. J. Plast. 24 (2008) 1333-1359. |
[9] | S. Kuramoto, T. Furuta, J. Hwang, K. Nishino, T. Saito, Mater. Sci. Eng. A 442 (2006) 454-457. |
[10] |
Y.L. Hao, S.J. Li, B.B. Sun, M.L. Sui, R. Yang, Phys. Rev. Lett. 98 (2007), 216405.
DOI URL PMID |
[11] | M.Y. Gutkin, T. Ishizaki, S. Kuramoto, I.A. Ovid’ko, Acta Mater. 54 (2006) 2489-2499. |
[12] | H. Xing, J. Sun, Q. Yao, W.Y. Guo, R. Chen, Appl. Phys. Lett. 92 (2008), 151905. |
[13] | H. Tobe, H.Y. Kim, T. Inamura, H. Hosoda, S. Miyazaki, Acta Mater. 64 (2014) 345-355. |
[14] | H. Xing, J. Sun, Appl. Phys. Lett. 93 (2008) 31908. |
[15] | Y. Yang, S.Q. Wu, G.P. Li, Y.L. Li, Y.F. Lu, K. Yang, P. Ge, Acta Mater. 58 (2010) 2778-2787. |
[16] | P. Castany, M. Besse, T. Gloriant, Phys. Rev. B 84 (2011), 020201. |
[17] | Y.B. Wang, Y.H. Zhao, Q. Lian, X.Z. Liao, R.Z. Valiev, S.P. Ringer, Y.T. Zhu, E.J. Lavernia, Scr. Mater. 63 (2010) 613-616. |
[18] |
J.P. Cui, Y.L. Hao, S.J. Li, M.L. Sui, D.X. Li, R. Yang, Phys. Rev. Lett. 102 (2009), 045503.
URL PMID |
[19] | S.J. Li, R. Yang, M. Niinomi, Y.L. Hao, Y.Y. Cui, Z.X. Guo, Mater. Sci. Technol. 21 (2005) 678-686. |
[20] | B. Dodd, Y. Bai, Amsterdam, 2012, pp. 111-164. |
[21] | B. Dodd, Oxford, 2012, pp. 24-44. |
[22] | S.M. Walley, Metall. Mater. Trans. A 38 (2007) 2629-2654. |
[23] | R.W. Armstrong, S.M. Walley, Int. Mater. Rev. 53 (2008) 105-128. |
[24] |
C. Zener, J.H. Hollomon, J. Appl. Phys. 15 (1944) 22-32.
DOI URL |
[25] |
Y. Guo, Q. Ruan, S. Zhu, Q. Wei, H. Chen, J. Lu, B. Hu, X. Wu, Y. Li, D. Fang, Phys. Rev. Lett. 122 (2019), 015503.
DOI URL PMID |
[26] | D. Rittel, L.H. Zhang, S. Osovski, Phys. Rev. Appl. 7 (2017), 044012. |
[27] |
D. Rittel, Z.G. Wang, M. Merzer, Phys. Rev. Lett. 96 (2006), 075502.
URL PMID |
[28] |
D. Rittel, P. Landau, A. Venkert, Phys. Rev. Lett. 101 (2008), 165501.
URL PMID |
[29] | S. Medyanik, W. Liu, S. Li, J. Mech. Phys. Solids 55 (2007) 1439-1461. |
[30] |
S. Cheng, Y. Zhao, Y. Guo, Y. Li, Q. Wei, X.L. Wang, Y. Ren, P.K. Liaw, H. Choo, E.J. Lavernia, Adv. Mater. 21 (2009) 5001-5004.
DOI URL PMID |
[31] | Q. Wei, D. Jia, K.T. Ramesh, E. Ma, Appl. Phys. Lett. 81 (2002) 1240-1242. |
[32] | Q. Wei, H. Zhang, B. Schuster, K. Ramesh, R. Valiev, L. Kecskes, R. Dowding, L. Magness, K. Cho, Acta Mater. 54 (2006) 4079-4089. |
[33] | Q. Wei, Z.L. Pan, X.L. Wu, B.E. Schuster, L.J. Kecskes, R.Z. Valiev, Acta Mater. 59 (2011) 2423-2436. |
[34] | Q. Wei, S. Cheng, K. Ramesh, E. Ma, Mater. Sci. Eng. A 381 (2004) 71-79. |
[35] | Q. Wei, L.J. Kecskes, K.T. Ramesh, Mater. Sci. Eng. A 578 (2013) 394-401. |
[36] | O. Engler, V. Randle, Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd ed. CRC Press, Boca Raton, 2010,pp. 15-50. |
[37] | J.L. Sun, P.W. Trimby, F.K. Yan, X.Z. Liao, N.R. Tao, J.T. Wang, Acta Mater. 79 (2014) 47-58. |
[38] | Y. Xu, J. Zhang, Y. Bai, M.A. Meyers, Metall. Mater. Trans. A 39 (2008) 811-843. |
[39] | Q. Xue, J.F. Bingert, B.L. Henrie, G.T. Gray, Mater. Sci. Eng. A 473 (2008) 279-289. |
[40] | Q. Xue, G.T. Gray, B.L. Henrie, S.A. Maloy, S.R. Chen, Metall. Mater. Trans. A 36 (2005) 1471-1486. |
[41] | R.Z. Valiev, T.G. Langdon, Prog. Mater. Sci. 51 (2006) 881-981. |
[42] |
Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, Y.T. Zhu, Acta Mater. 52 (2004) 4589-4599.
DOI URL |
[43] | Q. Wei, T. Jiao, K. Ramesh, E. Ma, L. Kecskes, L. Magness, R. Dowding, V. Kazykhanov, R. Valiev, Acta Mater. 54 (2005) 77-87. |
[44] |
Q. Wei, L. Kecskes, T. Jiao, K.T. Hartwig, K.T. Ramesh, E. Ma, Acta Mater. 52 (2004) 1859-1869.
DOI URL |
[45] |
W.Y. Guo, H. Xing, J. Sun, X.L. Li, J.S. Wu, R. Chen, Metall. Mater. Trans. A 39 (2008) 672-678.
DOI URL |
[46] | I.J. Beyerlein, L.S. Toth, Prog. Mater. Sci. 54 (2009) 427-510. |
[47] | D.A. Hughes, N. Hansen, Acta Mater. 48 (2000) 2985-3004. |
[48] | D.A. Hughes, Q. Liu, D.C. Chrzan, N. Hansen, Acta Mater. 45 (1997) 105-112. |
[49] | D.A. Hughes, W.D. Nix, Mater. Sci. Eng. A 122 (1989) 153-172. |
[50] | B. Bay, N. Hansen, D.A. Hughes, D. Kuhlmann-Wilsdorf, Acta Metall. Mater. 40 (1992) 205-219. |
[51] | M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado, T.R. McNelley, Acta Mater. 51 (2003) 1307-1325. |
[52] | D. Rittel, Z.G. Wang, Mech. Mater. 40 (2008) 629-635. |
[53] | Y.Z. Guo, Q.C. Ruan, S.X. Zhu, Q. Wei, J.N. Lu, B. Hu, X.H. Wu, Y.L. Li, J. Mech. Phys. Solids 135 (2020), 103811. |
[54] | Y. Zheng, W. Zeng, Y. Wang, D. Zhou, X. Gao, J. Alloys. Compd. 708 (2017) 84-92. |
[55] | Y. Guo, Y. Li, Acta Mech. Solida Sin. 25 (2012) 299-311. |
[56] | D. Rittel, L.H. Zhang, S. Osovski, J. Mech. Phys. Solids 107 (2017) 96-114. |
[57] |
M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Q. Xue, Mater. Sci. Eng. A 317 (2001) 204-225.
DOI URL |
[58] | M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Y.B. Xu, Q. Xue, J. Phys. IV France 10 (2000), Pr9-51-Pr9-56. |
[59] | J.A. Hines, K.S. Vecchio, Acta Mater. 45 (1997) 635-649. |
[60] | J. Li, Y. Li, C. Huang, T. Suo, Q. Wei, Acta Mater. 141 (2017) 163-182. |
[61] | J.S. Langer, Phys. Rev. E 95 (2017), 013004. |
[62] | J.S. Langer, Phys. Rev. E 94 (2016), 063004. |
[63] | J.S. Langer, E. Bouchbinder, T. Lookman, Acta Mater. 58 (2010) 3718-3732. |
[1] | Md. R.U. Ahsan, Xuesong Fan, Gi-Jeong Seo, Changwook Ji, Mark Noakes, Andrzej Nycz, Peter K. Liaw, Duck Bong Kim. Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 625 [J]. J. Mater. Sci. Technol., 2021, 74(0): 176-188. |
[2] | Peng Peng, Anqiao Zhang, Jinmian Yue, Xudong Zhang, Yuanli Xu. Macrosegregation and thermosolutal convection-induced freckle formation in dendritic mushy zone of directionally solidified Sn-Ni peritectic alloy [J]. J. Mater. Sci. Technol., 2021, 75(0): 21-26. |
[3] | Mengdan Hu, Taotao Wang, Hui Fang, Mingfang Zhu. Modeling of gas porosity and microstructure formation during dendritic and eutectic solidification of ternary Al-Si-Mg alloys [J]. J. Mater. Sci. Technol., 2021, 76(0): 76-85. |
[4] | Qin Xu, Dezhi Chen, Chongyang Tan, Xiaoqin Bi, Qi Wang, Hongzhi Cui, Shuyan Zhang, Ruirun Chen. NbMoTiVSix refractory high entropy alloys strengthened by forming BCC phase and silicide eutectic structure [J]. J. Mater. Sci. Technol., 2021, 60(0): 1-7. |
[5] | Yu Zhou, Qunbo Fan, Xin Liu, Duoduo Wang, Xinjie Zhu, Kai Chen. Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading [J]. J. Mater. Sci. Technol., 2020, 59(0): 138-148. |
[6] | Chenfan Yu, Peng Zhang, Zhefeng Zhang, Wei Liu. Microstructure and fatigue behavior of laser-powder bed fusion austenitic stainless steel [J]. J. Mater. Sci. Technol., 2020, 46(0): 191-200. |
[7] | Varma S.K., Sanchez Francelia, Moncayo Sabastian, Ramana C.V.. Static and cyclic oxidation of Nb-Cr-V-W-Ta high entropy alloy in air from 600 to 1400 °C [J]. J. Mater. Sci. Technol., 2020, 38(0): 189-196. |
[8] | Wei Fu, Xiaoguo Song, Ruichen Tian, Yuzhen Lei, Weimin Long, Sujuan Zhong, Jicai Feng. Wettability and joining of SiC by Sn-Ti: Microstructure and mechanical properties [J]. J. Mater. Sci. Technol., 2020, 40(0): 15-23. |
[9] | Timothy Alexander Listyawan, Hyunjong Lee, Nokeun Park. A new guide for improving mechanical properties of non-equiatomic FeCoCrMnNi medium- and high-entropy alloys with ultrasonic nanocrystal surface modification process [J]. J. Mater. Sci. Technol., 2020, 59(0): 37-43. |
[10] | Timothy Alexander Listyawan, Hyunjong Lee, Nokeun Park, Unhae Lee. Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process [J]. J. Mater. Sci. Technol., 2020, 57(0): 123-130. |
[11] | Shiwei Ci, Jingjing Liang, Jinguo Li, Yizhou Zhou, Xiaofeng Sun. Microstructure and tensile properties of DD32 single crystal Ni-base superalloy repaired by laser metal forming [J]. J. Mater. Sci. Technol., 2020, 45(0): 23-34. |
[12] | Jian Yang Zhang, Bin Xu, Naeemul Haq Tariq, MingYue Sun, DianZhong Li, Yi Yi Li. Microstructure evolutions and interfacial bonding behavior of Ni-based superalloys during solid state plastic deformation bonding [J]. J. Mater. Sci. Technol., 2020, 46(0): 1-11. |
[13] | P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion [J]. J. Mater. Sci. Technol., 2020, 45(0): 98-107. |
[14] | Shuxia Wang, Chuanwei Li, Lizhan Han, Haozhang Zhong, Jianfeng Gu. Visualization of microstructural factors resisting the crack propagation in mesosegregated high-strength low-alloy steel [J]. J. Mater. Sci. Technol., 2020, 42(0): 75-84. |
[15] | Shude Ji, Shiyu Niu, Jianguang Liu. Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic [J]. J. Mater. Sci. Technol., 2019, 35(8): 1712-1718. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||