J Mater Sci Technol ›› 2008, Vol. 24 ›› Issue (01): 85-88.

• Research Articles • Previous Articles     Next Articles

Microstructure and Mechanical Properties of Mg-Al-Ca-Nd Alloys Fabricated by Gravity Casting

Hyeon-Taek Son, Jae-Seol Lee, Ik-Hyun Oh, Chang-Seog Kang   

  1. Korea Institute of Industrial Technology, 1110-9 Oryong-dong, Buk-gu, Gwangju, 500-480, South Korea
  • Received:2007-09-03 Revised:1900-01-01 Online:2008-01-28 Published:2009-10-10
  • Contact: Hyeon-Taek Son

Abstract: The aims of this study are to investigate the effects of Nd addition in the Mg-Al-Ca alloys on microstructure and mechanical properties. Microstructure of as-cast Mg-5Al-3Ca alloy containing Nd consists of α-Mg matrix, eutectic phase and Al-Nd rich intermetallic compound. As Nd addition was increased, α-Mg matrix morphology was changed from dendritic to equiaxed grains and average value of grain size was decreased. Nd addition to Mg-5Al-3Ca based alloys resulted in the formation of Al-Nd rich intermetallic compounds at grain boundary and α-Mg matrix grains. And these Al-Nd rich intermetallic compounds were dispersed homogeneously. In these alloys, two kinds of eutectic phases were observed, i.e. coarse irregular-shape structure at grain boundary and fine needle-shape structure in the α-Mg matrix grain. It is found that the ultimate strength showed the maximum value of 271 MPa at Mg-5Al-3Ca-2Nd alloy and elongation was decreased as the addition of Nd was increased.

Key words: Mg-Al-Ca alloy, Neodymium (Nd), Rare earth element