J Mater Sci Technol ›› 2007, Vol. 23 ›› Issue (01): 61-67.

• Research Articles • Previous Articles     Next Articles

Failure Modes of Lead Free Solder Bumps Formed by Induction Spontaneous Heating Reflow

Mingyu LI, Hongbo XU, Jongmyung KIM, Hongbae KIM   

  1. Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, China...
  • Received:2005-12-19 Revised:2006-11-09 Online:2007-01-28 Published:2009-10-10
  • Contact: Mingyu LI

Abstract: The shear failure modes and respective failure mechanism of Sn3.5Ag and Sn3.0Ag0.5Cu lead-free solder bumping on Au/Ni/Cu metallization formed by induction spontaneous heating reflow process have been investigated through the shear test after aging at 120±C for 0, 1, 4, 9 and 16 d. Different typical shear failure behaviors have been found in the loading curves (shear force vs displacement). From the results of interfacial morphology analysis of the fracture surfaces and cross-sections, two main typical failure modes have been identified. The probabilities of the failure modes occurrence are inconsistent when the joints were aged for different times. The evolution of the brittle Ni3Sn4 and Cu-Ni-Au-Sn layers and the grains coarsening of the solder bulk are the basic reasons for the change of shear failure modes.

Key words: Induction spontaneous heating reflow, Lead free solder, Shear test, Failure mode