Pulse Plating of Copper-ZrB2 Composite Coatings

J Mater Sci Technol ›› 2006, Vol. 22 ›› Issue (04): 514-518.

• Research Articles • Previous Articles Next Articles

Pulse Plating of Copper-ZrB2 Composite Coatings

Dongming GUO, Min ZHANG, Zhuji JIN, Renke KANG

Key laboratory for Precision & Non-traditional Machining of Ministry of Education, Dalian University of Technology, Dalian 116023, China

Received:2005-06-18 Revised:2005-10-21 Online:2006-07-28 Published:2009-10-10
Contact: Min ZHANG

Abstract

Abstract: Copper-zirconium diboride (ZrB2) composite coatings were fabricated using pulse plating technique to acquire a new type of EDM (electro-discharge machining) electrode material. The effects of pulse parameters, i.e., the average current density, the frequency and the duty cycle, on the incorporation of ZrB2 particles in the copper matrix were investigated. The amount of codeposited ZrB2 particles had a maximum at average current density of 3 A/dm2 and increased with decreasing duty cycle as well as current frequency of the pulse current used for deposition. The hardness of the coatings increased with increasing ZrB2 percentage, whereas the incorporation of ZrB2 particles had little effect on the resistivity of the composites.

Key words: Pulse plating, Codeposition, Composite coatings

Dongming GUO, Min ZHANG, Zhuji JIN, Renke KANG. Pulse Plating of Copper-ZrB2 Composite Coatings[J]. J Mater Sci Technol, 2006, 22(04): 514-518.

References

[1] Y.Z.Wan, Y.L.Wang, H.M.Tao, G.X.Cheng and X.H.Dong: J. Mater. Sci. Lett.,1998, 17(15), 1251.
[2] J.H.Zhu, L.Liu, G.H.Hu, B.Shen, W.B.Hu and W.J.Ding: Mater. Lett., 2004, 58(10), 1634.
[3] V.D.Stankovic and M.Gojo: Surf. Coat. Technol., 1996, 81, 225.
[4] V.Terzieva, J.Fransaer and J.P.Celis: J. Electrochem. Soc., 2000, 147(1), 198.
[5] M.Ghorbani, M.Mazaheri, K.Khangholi and Y.Kharazi: Surf. Coat. Technol., 2001, 148, 71.
[6] C.Buelens, J.P.Celis and J.R.Roos: J. Appl. Electrochem.,1983, 13, 541.
[7] J.P.Celis and J.R.Roos: J. Electrochem. Soc., 1977, 124, 1508.
[8] M.H.Fawzy, M.M.Ashour and A.M.Abd El-Halim: Trans. Inst. Met. Finish.,1995, 73(4), 132.
[9] V.Bhalla, C.Ramasamy, N.Singh and M.Pushpavanam: Plat. Surf. Finish., 1995, 82(11), 58.
[10] J.P.Celis, J.R.Roos and C.Buelens: J. Electrochem. Soc., 1987, 134, 1402.
[11] J.Pransaer, J.P.Celis and J.R.Roos: J. Electrochem. Soc., 1992, 139, 413.
[12] D.Kolar and S.Pejovnik: Sintering-theory and practice: Proc. 5th International Round Table Conference on Sintering, Elsevier, Amsterdam, 1982.
[13] Ise Buichi, Meguro Shinsaku, Tamura Takashi and Takagi Osamu: Tohoku Kogyo Daigaku Kiyo, 1: Rikogakuhen, 1988, 8, 25. (In Japanese)
[14] Borodin: Prot. Met., 1979, 5, 507. (in Russian)
[15] P.Gyftou, M.Stroumbouli, E.A.Pavlatou and N.Spyrellis: Trans. Inst. Met. Finish., 2002, 80(3), 88.
[16] M.Stroumbouli, P.Gyftou, E.A.Pavlatou and N.Spyrellis: Surf. Coat. Technol, 2005, 195, 325.
[17] G.Maurin and A.Lavanant: J. Appl. Electrochem., 1995, 25, 1113.
[18] J.C.Bailar and H.J.Emeleus: Comprehensive Inorganic Chemistry, Vol. 3, Pergamon Press, Oxford, 1973, 431.
[19] E.C.Kedward and J.G.Martin: US Patent, 3830711, 1974.
[20] N.Guglielmi: J. Electrochem. Soc., 1972, 119(8), 1009.
[21] M.E.Bahrololoom and R.Sani: Surf. Coat. Technol., 2005, 192, 154.
[22] J.Zahavi and H.Kerbel: Proc. 68th An. Tech. Conf. Am. Electroplaters' Soc., Boston, MA, 1981.
[23] Xinguo HU and Fugen SUN: Plating Finishing, 1989, 11(2), 7. (in Chinese)
[24] J.P.Celis and J.R.Roos: J. Electrochem. Soc., 1977, 124(10), 1508.

Pulse Plating of Copper-ZrB2 Composite Coatings

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments

[1]	V. Mashtalyar Dmitry, V. Nadaraia Konstantine, L. Sinebryukhov Sergey, V. Gnedenkov Sergey. Protective Composite Coatings Formed on Mg Alloy Surface by PEO Using Organofluorine Materials [J]. J. Mater. Sci. Technol., 2017, 33(7): 661-667.
[2]	Lin Zhu, Jinwu Wang, Zhuang Liu. Wear Resistance of TiN_x/CF_y Coatings Deposited by RF Magnetron Co-Sputtering [J]. J. Mater. Sci. Technol., 2015, 31(12): 1207-1216.
[3]	Zhengkai Chang, Jun Gong, Chao Sun. Co-based Amorphous/Nanocrystalline Composite Coatings Deposited by Arc Ion Plating [J]. J. Mater. Sci. Technol., 2013, 29(9): 806-812.
[4]	Y. Mazaheri, F. Karimzadeh, M.H. Enayati. Development of Al356-Al₂O₃ Nanocomposite Coatings by High Velocity Oxy-fuel Technique [J]. J. Mater. Sci. Technol., 2013, 29(9): 813-820.
[5]	Ying Liang, Mingyue Liu, Jixin Chen, Xiaoxia Liu, Yanchun Zhou. Electrodeposition and Characterization of Ni/Ti₃Si(Al)C₂ Composite Coatings [J]. J Mater Sci Technol, 2011, 27(11): 1016-1024.
[6]	Dongming GUO, Min ZHANG, Zhuji JIN, Renke KANG. Effects of Chloride Ion on the Texture of Copper and Cu-ZrB2 Coatings Electrodeposited from Copper Nitrate Solution in Different Plating Modes [J]. J Mater Sci Technol, 2006, 22(05): 643-646.
[7]	Gang WU, Ning LI, Derui ZHOU, Kurachi Mitsuo. Microstructure of Co-Ni-Al2O3 Composite Coatings by Electroforming [J]. J Mater Sci Technol, 2003, 19(Supl.): 133-134.
[8]	Zhiwen LI, Changsong LIU, Jihua HUANG, Sheng YIN. Synthesis and Deposition of TiC-Fe Coatings by Oxygen-acetylene Flame Spraying [J]. J Mater Sci Technol, 2003, 19(02): 161-163.