[1] |
Yinchuan Wang, Hua Huang, Gaozhi Jia, Guizhou Ke, Jian Zhang, Guangyin Yuan.
Effect of grain size on the mechanical properties of Mg foams
[J]. J. Mater. Sci. Technol., 2020, 58(0): 46-54.
|
[2] |
Peipei Ma, Chunhui Liu, Qiuyu Chen, Qing Wang, Lihua Zhan, Jianjun Li.
Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy
[J]. J. Mater. Sci. Technol., 2020, 46(0): 107-113.
|
[3] |
Wei Li, Martina Vittorietti, Geurt Jongbloed, Jilt Sietsma.
The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel
[J]. J. Mater. Sci. Technol., 2020, 45(0): 35-43.
|
[4] |
H.T. Jeong, W.J. Kim.
Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy
[J]. J. Mater. Sci. Technol., 2020, 42(0): 190-202.
|
[5] |
A.G. Wang, X.H. An, J. Gu, X.G. Wang, L.L. Li, W.L. Li, M. Song, Q.Q. Duan, Z.F. Zhang, X.Z. Liao.
Effect of grain size on fatigue cracking at twin boundaries in a CoCrFeMnNi high-entropy alloy
[J]. J. Mater. Sci. Technol., 2020, 39(0): 1-6.
|
[6] |
Xiankun Ji, Baoqi Guo, Fulin Jiang, Hong Yu, Dingfa Fu, Jie Teng, Hui Zhang, John J.Jonas.
Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain
[J]. J. Mater. Sci. Technol., 2020, 36(0): 160-166.
|
[7] |
Xumin Zhu, Congyang Gong, Yun-Fei Jia, Runzi Wang, Chengcheng Zhang, Yao Fu, Shan-Tung Tu, Xian-Cheng Zhang.
Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1607-1617.
|
[8] |
Shengyu Jiang, Ruihong Wang.
Grain size-dependent Mg/Si ratio effect on the microstructure and mechanical/electrical properties of Al-Mg-Si-Sc alloys
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1354-1363.
|
[9] |
Gábor Ribárik, Bertalan Jóni, Tamás Ungár.
Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1508-1514.
|
[10] |
M.P. Miles, T.W. Nelson, C. Gunter, F.C. Liu, L. Fourment, T. Mathis.
Predicting recrystallized grain size in friction stir processed 304L stainless steel
[J]. J. Mater. Sci. Technol., 2019, 35(4): 491-498.
|
[11] |
Y.Z. Tian, S.J. Sun, H.R. Lin, Z.F. Zhang.
Fatigue behavior of CoCrFeMnNi high-entropy alloy under fully reversed cyclic deformation
[J]. J. Mater. Sci. Technol., 2019, 35(3): 334-340.
|
[12] |
Haibin Wang, Mark Gee, Qingfan Qiu, Hannah Zhang, Xuemei Liu, Hongbo Nie, Xiaoyan Song, Zuoren Nie.
Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2435-2446.
|
[13] |
H.K. Yang, K. Cao, Y. Han, M. Wen, J.M. Guo, Z.L. Tan, J. Lu, Y. Lu.
The combined effects of grain and sample sizes on the mechanical properties and fracture modes of gold microwires
[J]. J. Mater. Sci. Technol., 2019, 35(1): 76-83.
|
[14] |
Xinguang Wang, Guoming Han, Chuanyong Cui, Shuai Guan, Jinguo Li, Guichen Hou, Yizhou Zhou, Xiaofeng Sun.
On the γ′ precipitates of the normal and inverse Portevin-Le Châtelier effect in a wrought Ni-base superalloy
[J]. J. Mater. Sci. Technol., 2019, 35(1): 84-87.
|
[15] |
Shuang Gao, Yizhou Zhou, Zhi-Quan Liu, Tao Jin.
Intergrowth of C phase within μ phase in a Re-containing Ni-base single crystal superalloy
[J]. J. Mater. Sci. Technol., 2018, 34(5): 806-810.
|