J Mater Sci Technol ›› 2006, Vol. 22 ›› Issue (01): 19-24.

• Research Articles • Previous Articles     Next Articles

Physical Properties and Electrochemical Performance of LiNixMn2-xO4 Cathode Materials Preparedusing a Precipitation Method

Guoguang WANG, Jianming WANG, Wenqu MAO, Jianqing ZHANG, Chunan CAO   

  1. Department of Chemistry, Zhejiang University, Hangzhou 310027, China...
  • Received:2005-02-28 Revised:2005-08-19 Online:2006-01-28 Published:2009-10-10
  • Contact: Jianming WANG

Abstract: To improve the cycle performance of spinel LiMn2O4 as the cathode material of 4 V class Li secondary batteries, LiNixMn2-xO4 (x=0~0.3) samples were prepared using a simple precipitation method, and the effects of Ni doping on the physical properties and electrochemical performance of the samples were investigated using various methods. All LiNixMn2-xO4 (x=0~0.3) compounds show a single spinel phase, and the lattice parameter (a), the unit cell volume (v) and particle size decrease with increasing Ni content. The results of the electrochemical experiments showed that the initial charge-discharge capacity of LiNixMn2-xO4 samples in the 3.0~4.4 V range decreases with increasing Ni content except for pure LiNixMn2-xO4; however, the capacity in the 4.4~4.9 V range increases with the increasing Ni content. For spinel samples Ni substitution can contribute to the improvement of their cycle performance due to the formation of the stronger Ni-O bond, homogeneous morphology, and sub-micron sized particles, and the sample with x=0.05 has larger peak currents, higher initial capacity and better cycling capability due to its lower electrochemical and diffusion polarization than those of other samples.

Key words: Ni-substituted LiMn2O4, Electrochemical performance, Electrochemical impedance spectroscopy