Progress in Numerical Simulation of Solidification Process of Shaped Casting

Abstract

Abstract: Solidification simulation of manufacturing shaped casting which plays an important role in asSuring the soundness and quality of castings, in minimizing the trial production time and in reducing the manufacturing cost becomes one of the hottest topics of the new research frontiers of foundry technology at home and abroad. Practical three dimensional computer numerical simulation system for temperature distribution during solidification as well as shrinkage cavity and porosity prediction has already been put into application all over the world. Further fundamental researche5 on fluid flow, thermal stress and micro-modeling as well as practical approaches of numerical simulation of solidification process of shaped castings for routine analysis of foundry industry are still underway.

Baicheng LIU; Houfa SHEN and Wenzhen LI(Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, China)(To whom correspondence should be addressed). Progress in Numerical Simulation of Solidification Process of Shaped Casting[J]. J Mater Sci Technol, 1995, 11(5): 313-322.

References

[1] E.Niyama: Ann. Rev. Mater. Sci., 1990. 20, 101.
[2] H.J.Lin and W.S.Hwang: Physical Metallurgy of Cast Iron IV, Japan, 1989. 461.
[3] J.Campbell: The Foumdryman, 1991, 421.
[4] J.Guan and R. Sham: Giesserei, 1992, 8, 318.
[5] Baicheng LIU and Tao JING: Chin. J. of Mech. Eng.,1993, 5, 28.
[6] Tao Jing, Qibo Mei and Baicheng Liu: 60th world Foundry Congress, The Netherlands, 1993.
[7] Tao Jing and Baicheng Liu: J. of Tsinghua Lhaiversity,1993, S5, 102.
[8] M. Kiguchi: Trans. of JFS, 1990, (9), 63.
[9] Y.Nagasaka, S.Kiguchi, M.Nachi and J.K.Brimacombe:AFS Trans., 1989, 97, 553.
[10] T.Muramatsu and Y.Nishida: Imono, 1987, 59, 613.
[11] E.Niyama, T.Uchida, M.Morikawa and S.Saito: AFS Inter. Cast Metals J., 1982, 9, 52.
[12] P.N.Hansen, G.C.Hartmann and J.C.Sturm: AFS Trans., 1991, 99, 477.
[13] I.J.Chiou and H.L.Tsai: AFS Trans., 1990, 98, 823.
[14] I.Imafuku and K.Chijiiwa: AFS Trans., 1983, 91, 463.
[15] Baicheng Liu, Jiarong Li, Wenzhen Li and Chunle Wang: Proc. of 2nd Asian Foundry Congress, Japan,1994.
[16l J.R.Li, B.C.Liu, C.R.Loper,Jr., H.B.Xiang, H.J.Tong and Y.T.Xie: AFS Trans., 1994, 94.
[17] Jiarong Li, Baicheng Liu, Huabing Xiang, Hanjing Tong and Yongtong Xie: 61st World Foundry Congress, Beijing, China, 1995.
[18] Baicheng Liu, Jiarong Li and Rui Liu: Proc. of the Fifth Inter. Symp. of the Physical Metallurgy of Casting Iron, France, Oct. 1994.
[19] Tao JING and Baicheng LIU: Hot Working Technology 1993, (2), 10. (in Chinese)
[20] W.-S.Hwang and R.A.Stoehr: J. of Mitals, 1983 35(10), 22.
[21] H.J.Lin and W.-S.Hwang: AFS Trans., 1988, 96, 447.
[22] Junqing WANG, S.F.Hansen and P.N.Hansen:Foundry 1987, 12, 20. (in Chinese)
[23] H.-J.Lin and W.-S. Hwang: AFS Thans., 1989, 97,855.
[24] B.Minaie, K.A.Stelson and V.R.Voller: ASAW J. of EMT, 1991, 113, 296.
[25] K.Anzai and T.Uchida: Imono, 1990, 62, 90. (in Japanese)
[26] M.Ohmasa and I.Ohnaka: Imono, 1991, 63, 817. (in Japanese)
[27] B.D.Nichols, C.W.Hirt and R.S.Hotchkiss: Report LA-8355, Los Alamos Science Laboratory, 1980.
[28] C.W.Hirt and B.D.Nichols: J. of Computational Phyics, 1981, 39, 201.
[29] Jun Liu and D.B.Spalding: Phys. Chem. Hydrodynamics, 1988, 10(5/6), 625.
[30] Suhas V. Patankar: Numerical beat transfer and fluid flow, McGraw-Hill, 1980.
[31] Zhiqiang GAO: Ph.D.Thesis, Tsinghua University,1995.
[32] Len Estrin: Modern Casting, 1994, (7), 20.
[33] G.Upadhya and A.J.Paul: AFS Thans., 1992, 118,925.
[34] Qingxiang PEI: Ph.D.Thesis, Tsinghua University,1991.
[35] J.W.Wises and J.A.Dantzig: Metall. Trans. A, 1990,21A, 489.
[36] Jiade Guan and P.R.Sahm: Giessereiforschung, 1991,43, 1.
[37] Y.Otsuka, H.Makino, T.Ono and N.Matsubara: 60th World Foundry Congress, Netherlands, 1993.
[38] Xianshu ZHENG, Junze JIN, Keren GUO, Guoqin ZHANG, Fengqin YANG and Hongkui YANG: Steel and Iron, 1988, (10), 35. (in Chinese)
[39] Shigen ZHUf Ph.D.Thesis, Tsinghua University, 1989.
[40] Jiaquan ZHANG: Ph.D.Thesis, Tsinghua University,1993.
[41] Chi LIU, Qingchun LI and Songyan ZENG: Foundry 1988, 8, 32. (in Chinese)
[42] Kang DENG: Ph.D. Thesis, Dalian University of Technology, 1989.
[43] Gongli YU: Ph.D. Thesis, Dalian University of Technology, 1992.
[44] Baicheng Liu, Riming Zhu, shoumei Xiong, Ying Gao and Yong Zhang: Proc. of the Fifth Inter. Symp. of the Physical Metallurgy of Casting Iron, France, Oct. 1994.
[45] Riming ZHU: Ph.D.Thesis, Tsinghua University, 1995.
[46] M.Rappaz and P.Thevoz: Acta Mitall., 1987, 35,1487.
[47] R.Sasikumar: Cast Mitals, 1990, 2, 214.
[48] S.G.R.Brown and J.A.Spittle: Cast Metals, 1990, 3,18.
[49] M.Rappaz: Technical Forum of the 61th World Foundry Congress, Beijing, 1995.
[50] K.C.Su, I.Ohnaka, I.Yamauch and T.Fukusako: Physical Metallurgy of Cast Iron, eds. by H.Fredrikssen and M.Hillert, North Holland, New York, 1984, 181.
[51] F.Edward: Physical Metallrgy of Cast Iron, eds.by H.Fredrikssen and M.Hillert, North Holland, New York, 1984, 191.
[52] D.M.Stefanescu and C.Kanetkar: Computer Simulation of Microstructural Evolution, ed. by D.J.Srolovtz,TMS-AIME, 1985, 171.
[53] E.Lundback, I.L.Svensson and P.Persson: Modelling of Metal Forming Processes, eds. by J.L. Chenot and E. Onate, Kluwer Academic, 1988, 37.
[54] D.M.Stefanescu, G.Updahya and D.Bandyopadhyay:Mitall. Trans. A., 1990, 21A, 997.
[55] S.Chang, D.Shangguan and D.M. Stefanescu: AFS fTrans., 1991, 99, 531.
[56] F.J.Bradley: Scripta Mitall. Mater., 1991, 25, 2091.
[57] F.J.Bradley: Scripta Mitall. Mater., 1992, 26, 443.
[58] W.Kurz and D.J.Fisher: Fundamentals of Solidification, Trans. Tech., 1986.
[59] S.E.Wetterfall, H.Fredriksson and M.Hillert. JISI,1972, 210, 323.
[60] I.Minkoff: The Foundryman, 1993, 16.
[61] D.Venugopalan: Metall. Trans. A, 1990, 21A, 913.
[62] I.L.Svensson: 57th World Foundry Congress, Osaka,1990.
[63] Wenzhen LI: Ph.D.Thesis, Tsinghua University, 1995.
[64] Baicheng Liu and Tao Jing: Proc. of the 2nd Inter. Conf. of Manufacturing Technology Hong Kong,1993, 229.6