Effects of External Electric Field on AlN Precipitation and Recrystallization Texture of Deep-drawing 08Al Killed Steel Sheet

Abstract

Abstract: The effects of an electric field on AlN precipitation and recrystallization texture were investigated. Cold-rolled 08Al killed steel sheets were annealed at 550℃ according to the two-step processes, for various maintaining times, with and without applying an electric field. It was found that the electric field promotes the precipitation of the second phase (AlN particles), strengthens the γ-fiber and weakens the γ-fiber texture component in the recrystallized specimens. A possible explanation for the reinforcement of α-fiber texture by the electric field is that the second phase AlN particle promotes the growth of α-fiber at the expense of differently oriented grains.

Key words: Electric field annealing, AlN, Recrystallization texture, 08Al killed steel sheet

Xiang ZHAO, Zhuochao HU, Liang ZUO. Effects of External Electric Field on AlN Precipitation and Recrystallization Texture of Deep-drawing 08Al Killed Steel Sheet[J]. J Mater Sci Technol, 2006, 22(06): 747-750.

References

[1 ] H.Conrad, N.Karam and S.Mannan: Scripta Metall., 1983, 17(3), 411.
[2 ] H.Conrad, N.Karam and S.Mannan: Scripta Metall., 1984, 18(3), 275.
[3 ] H.Conrad, N.Karam, S.Maunan and A.F.Sprecher: Scripta Metall., 1988, 22(2), 235.
[4 ] H.Conrad, Z.Guo and A.F.Sprecher: Scripta Metall., 1989, 23(6), 821.
[5 ] C.C.Koch: Mater. Sci. Eng., 2000, A287(2), 213.
[6 ] W.Liu, K.M.Liang, Y.K.Zheng and J.Z.Cui: J. Mater. Sci. Lett., 1996, 15, 1327.
[7 ] W.Liu and J.Z.Cui: Mater. Res. Bull., 1997, 32(10), 1411.
[8 ] Zhuochao HU, Xiang ZHAO, Liang ZUO, Fu WANG and Claude ESLING: Chin. J. Nonferrous Met., 2004, 14(8), 1366. (in Chinese)
[9 ] Zhuochao HU, Yangdong LIU, Xiang ZHAO, Liang ZUO, Fu WANG and Claude ESLING: Chin. J. Mater. Res., 2004, 18(5), 477. (in Chinese)
[10] Z.C.Hu, Y.D.Zhang, X.Zhao, L.Zuo, F.Wang and C.Esling: Solid .State Phenom., 2005, 105, 169.
[11] Yinong WANG, Changshu HE, Xiang ZHAO, Liang ZUO, Qizheng ZHI and Zhide LIANG: Acta Metall. Sin., 2000, 36, 126. (in Chinese)
[12] T.K.Wu, W.Liu, X.L.Li and Q.Liu: Mater. Lett., 2005, 59(11), 1365.
[13] G.Santhoff and W.Pitsch: Phil. Mag., 1987, B56, 471.
[14] R.K.Ray, J.J.Jonas and R.E.Hook: Int. Met. Rev., 1994, 39(4), 129.
[15] Zhuochao HU, Changshu HE, Xiang ZHAO and Liang ZUO: J. Northeastern Univ. (Natural Science), 2002, 23(7), 663. (in Chinese)
[16] Zhide LIANG, Jiazhen XU and Pu WANG: Three Di-mensional Orientation Distribution Analysis of Textured Materials, eds. Yuxing LI, Northeastern Institute of Technology Press, Shenyang, 1986, 108-109. (in Chinese)
[17] W.D.Cao, X.P.Lu, A.F.Sprecher and H.Conrad: Mater. Lett., 1990, 9, 193.
[18] R.W.Balluffi: Grain Boundary Structure and Kinetics, America Society of Metals Press, Ohio, 1979, 137.
[19] C.S.He, Y.D.Zhang, Y.N.Wang, X.Zhao, L.Zuo and C.Esling: Scripta Metall., 2003, 48(6), 737.
[20] P.R.Rios, F.S.Jr, H.R.Z.Sandim, R.L.Plaut and A.F.Padilha: Mater. Res., 2005, 8(3), 225.
[21] K.Murakami, J.Tarasiuk and H.Regle: Mater. Sci. Forum, 2004, 467-470(part 2), 893.
[22] K.Kashihara and F.Inoko: Acta Mater., 2001, 48, 3051.

[1]	Yinling Zhang, Aihan Feng, Shoujiang Qu, Jun Shen, Daolun Chen. Microstructure and low cycle fatigue of a Ti₂AlNb-based lightweight alloy [J]. J. Mater. Sci. Technol., 2020, 44(0): 140-147.
[2]	Kaiqi Hu, Qingfei Xu, Xia Ma, Qianqian Sun, Tong Gao, Xiangfa Liu. A novel heat-resistant Al-Si-Cu-Ni-Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlN_p microskeletons [J]. J. Mater. Sci. Technol., 2019, 35(3): 306-312.
[3]	Hou Legan, Li Bingcheng, Wu Ruizhi, Cui Lin, Ji Peng, Long Ruiying, Zhang Jinghua, Li Xinlin, Dong Anping, Sun Baode. Microstructure and mechanical properties at elevated temperature of Mg-Al-Ni alloys prepared through powder metallurgy [J]. J. Mater. Sci. Technol., 2017, 33(9): 947-953.
[4]	Chen Jie, Bao Chonggao, Chen Wenhui, Zhang Li, Liu Jinling. Mechanical Properties and Fracture Behavior of Mg-Al/AlN Composites with Different Particle Contents [J]. J. Mater. Sci. Technol., 2017, 33(7): 668-674.
[5]	Chen Lei,Pei Zhiliang,Xiao Jinquan,Gong Jun,Sun Chao. TiAlN/Cu Nanocomposite Coatings Deposited by Filtered Cathodic Arc Ion Plating [J]. J. Mater. Sci. Technol., 2017, 33(1): 111-116.
[6]	Bo Chen, Huaping Xiong, Yaoyong Cheng, Wei Mao, Shibiao Wu. Microstructure and Property of AlN Joint Brazed with Au-Pd-Co-Ni-V Brazing Filler [J]. J. Mater. Sci. Technol., 2015, 31(10): 1034-1038.
[7]	Jihua Peng, Dongyi Su, Chengxi Wang. Combined Effect of Aluminum Content and Layer Structure on the Oxidation Performance of Ti_1-_xAl_xN Based Coatings [J]. J. Mater. Sci. Technol., 2014, 30(8): 803-807.
[8]	Wenfeng Liu,Yuesheng Chai,Gang Sun,Mingang Zhang. Effects of Ag Layer on the Structure and Magnetic Properties of FePt:AlN Composite Films [J]. J Mater Sci Technol, 2009, 25(06): 795-798.
[9]	M.Bahgat, M.Radwan, F.E.Farghaly. Formation of AlN from Secondary Al Resources [J]. J Mater Sci Technol, 2006, 22(05): 621-624.
[10]	Yuhui SHA, Fang ZHANG, Song LI, Xiaoyu GAO, Jiazhen XU, Liang ZUO. Effects of Primary Annealing Condition on Recrystallization Texture in a Grain Oriented Silicon Steel [J]. J Mater Sci Technol, 2004, 20(03): 253-256.
[11]	Changbin SONG, Bocksoo HAN, Ying LI. A Study on Alnico Permanent Magnet Powders Prepared by Atomization [J]. J Mater Sci Technol, 2004, 20(03): 347-349.
[12]	Xuemin PAN, Xiufang BIAN, Weimin WANG, Jingyu QIN. Influence of Liquid Structure on Solid Transformation of CuAlNi Shape Memory Alloy [J]. J Mater Sci Technol, 2003, 19(02): 147-149.
[13]	Meidong HUANG, Chunyan LU, Bing WANG, Chao SUN, Rongfang HUANG, Lishi WEN, Guoqiang LIN, Chuang DONG. A Study of AlN Films Prepared by Arc Ion Plating [J]. J Mater Sci Technol, 2003, 19(01): 27-29.
[14]	Qiang ZHANG, Gaohui WU, Dongli SUN, Bofeng LUAN. Study on the Thermal Expansion and Thermal Cycling of AlNp/Al Composites [J]. J Mater Sci Technol, 2002, 18(01): 63-65.
[15]	Jiangtao LI Feixia CHEN Fengting WANG Dazhi YANG Dalian University of Technology,Dalian,116024,China. Influence of Moderate Temperature Treatment on Thermal Cycling Behaviour and Mechanical Properties of the CuAINiMnTi Alloys [J]. J Mater Sci Technol, 1993, 9(6): 445-448.