[1] D.Y.Yang, N.K.Lee and J.H.Yoon: J. Mater.Eng. Perform.,1993, 2(1), 119. [2] Z.M.Hu, J.W.Brooks and T.A.Dean: J. Mater. Process. Technol., 1999, 88, 251. [3] Z.M.Hu and T.A.Dean: J. Mater. Process. Technol., 2001, 111, 10. [4] J.W.Brooks and T.A.Dean: J. Mater. Process. Technol., 1998, 80-81, 149. [5] B.Soltsni, K.Mattiasson and A.Samuelsson: J. Mater. Process. Technol., 1994, 45, 69. [6] A.Morita, S.Hattori, K.Tani, A.Takemura and Y.Ashida: ISIJ Int., 1991, 31(8), 827. [7] B.S.Kang, N.S.Kim and S.Kobayashi: Int. J. Mach. Tools Manufact.,1990, 30(1), 43. [8] P.F.Bariani, S.Bruschi and T.Dal Negro: Int. J. Mach. Tools Manufact.,2004, 44, 945. [9] M.Akiyasu, H.Shigeo and T.Kazuhito: JSTJ Int., 1991, 31(8), 827. [10] He YANG, Yuli LIU, Wang CAI and Mei ZHAN: J. Mater. Sci. Technol., 2003, 19(suppl.1), 156. [11] Miaoquan LI, Shankun XUE, Aiming XIONG and Shenghui CHEN: J. Mater. Sci. Technol., 2005, 21(2), 155. [12] Y.S.Na, J.T.Yeom, N.K.Park and J.Y.Lee: J. Mater. Process. Technol., 2003, 141, 337. [13] Yuli LIU: Ph. D. Thesis, Northwesten Polytechnical University, Xi'an, China, 2001. (in Chinese) [14] Jun LIU: M.S. Thesis, Northwesten Polytechnical University, Xi'an, China, 2004. (in Chinese) [15] Yuli LIU, He YANG and Mei ZHAN: Chin. J. Mech. Eng., 2003, 39(1), 97. (in Chinese) [16] Wang CAI: M.S. Thesis, Northwesten Polytechnical University, Xi'an, China, 2002. (in Chinese) [17] S.Kobayashi, S.I.Oh and T.Altan: Metal Forming and the Finite Element Method, Oxford University Press, New York, 1989. [18] M.Zhan, Y.L.Liu and H.Yang: J. Mater. Process. Technol., 1999, 94, 231. [19] N.Rebelo and S.Kobayashi: Int. J. Mech. Sci., 1980, 22, 707. [20] Jiarong ZHANG and Tinyuan ZHAO: Handbook of Heat Physical Property of Material, New Era Press, Beijing, 1987. (in Chinese) |