J Mater Sci Technol ›› 2006, Vol. 22 ›› Issue (02): 239-244.

• Research Articles • Previous Articles     Next Articles

Low-temperature Preparation of Photocatalytic TiO2 Thin Films on Polymer Substrates by Direct Deposition from Anatase Sol

Yan HU, Chunwei YUAN   

  1. State Key Laboratory of Biomolecular, Southeast University, Nanjing 210096, China; School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
  • Received:2005-03-28 Revised:2005-05-31 Online:2006-03-28 Published:2009-10-10
  • Contact: Chunwei YUAN

Abstract: Anatase TiO2 sol was synthesized under mild conditions (75℃ and ambient pressure) by hydrolysis of titanium-n-butoxide in abundant acidic aqueous solution and subsequent reflux to enhance crystallization. At room temperature and in ambient atmosphere, crystalline TiO2 thin films were deposited on polymethylmethacrylate (PMMA), SiO2-coated PMMA and SiO2-coated silicone rubber substrates from the as-prepared TiO2 sol by a dip-coating process. SiO2 layers prior to TiO2 thin films on polymer substrates could not only protect the substrates from the photocatalytic decomposition of the TiO2 thin films but also enhance the adhesion of the TiO2 thin films to the substrates. Field-emission type scanning electron microscope (FE-SEM) investigations revealed that the average particle sizes of the nanoparticles composing the TiO2 thin films were about 35~47 nm. The TiO2 thin films exhibited high photocatalytic activities in the degradation of reactive brilliant red dye X-3B in aqueous solution under aerated conditions. The preparation process of photocatalytic TiO2 thin films on the polymer substrates was quite simple and a low temperature route.

Key words: Low temperature, Anatase nanoparticle, TiO2 film, Thermosensitive substrate...