High Temperature Creep behaviour of a Si_3N_4 Whisker Reinforced Al-Fe-V-Si Composite

J Mater Sci Technol ›› 1998, Vol. 14 ›› Issue (6): 527-532.

• Articles • Previous Articles Next Articles

High Temperature Creep behaviour of a Si_3N_4 Whisker Reinforced Al-Fe-V-Si Composite

Received:1998-11-28 Revised:1998-11-28 Online:1998-11-28 Published:2009-10-10

Abstract

Abstract: The creep behaviour of β-Si3N4 whisker reinforced Al-8.5Fe-1.3V-1.7Si composite has been investigated at the temperature 773 and 823 K. The results are characterized by high stress exponent and high apparent creep activation energy The creep data can be interpreted based on the incorporation of a threshold Stress and a load transfer coefficient into the power-law creep equation. A good correlation between the normalized creep rate and normalized effective stress is available which demonstrates that the creep behaviour of both the alloy and the composite is controlled by the matrix lattice self-diffusion in AI. EXamination on microstructure shows that edge dislocations exist at the interfaces between two adjacent whiskers and the intedeces emit edge dislocations in parallel paired-columns.

Liangming PENG; Shijie ZHU;Haoran CHEN and Fugang WANG(Dept. of Materials Engineering,Dalian University of Technology, Dalian 116023, China)Zongyi MA and Jing BI(Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, China). High Temperature Creep behaviour of a Si_3N_4 Whisker Reinforced Al-Fe-V-Si Composite[J]. J Mater Sci Technol, 1998, 14(6): 527-532.

References

[1] D.J.Skinner and K.Okazaki: Scripta Metall., 1984, 18,905.
[2] J.C.Ehrstrom and A.Pineau:Mater.Sci.Eng.A, 1994, A186, 55.
[3] D.Legzdina and T. A. Parathasarathy: Metall.Thans.A, 1990, 21A, 2155.
[4]M.K.Premkurmar, A.Lawley and M.J.Koczak: Mater.Sci. Eng. A, 1994, A174, 127.
[5] V.R.V.Ramanan, D.J.Skinner and M.S.Zedalis:Mater. Sci. Eng. A, 1991, A134, 912.
[6] M.A.Rodriguez and D.J.Skinner:J. Mater. Sci. Lett.,1990, 9, 1292.
[7] S.C.Khatri, A.Lawley, M.J.Koczak and K.G.Grassett:Mater. Sci. Eng. A, 1993, A167, 11,
[8] Y.Leng: Metall.Trans. A, 1995, 26A, 315.
[9] F.Carreno and O.A.Ruano: Mater. Sci. Eng. A, 1996,A214, 177.
[10] S.Mitra: Metall.Trans. A, 1996, 27A, 3913.
[11] J.Lin and O.D.Sherby: Res. Mech., 1981, 2, 251.
[12] R.W.Lund and W.D.Nix: Acta Metall.,1976, 24, 469.
[13] T.G.Nieh: Metall. Trans., 1984, 15A, 139.
[14] T.Morimoto, T.Yamaoka, H.Lilholt and M.Taya: J.Eng. Mater. Technol., 1988, 110, 70.
[15] T.G.Nieh, K.Xia and T.G.Langdon: J. Eng. Mater.Technol, 1988, 110, 77.
[16] K.T.Park, E.J.Lavernia and F.A.Mohamed: ActaMetall., 1990, 38, 2149.
[17] F.A.Mohamed, K.T.Park and E.J.Lavernia: Mater.Sci. Eng., 1992, A150, 21.
[18]A.B.Pandey, R.S.Mishra and Y.R.Mahajan: ActaMetall., 1992, 40, 2045.
[19] T.L.Dragone and W.D.Nix: Acta Metall., 1990, 38,1941.
[20] T.L.Dragone and W.D.Nix: Acta Metall., 1992, 40,2781.
[21] G.Gonzalez-Doncel and O.D.Sherby: Acta Metall.,1993, 41, 2797.
[22] Y.Li and T.G.Langdon: Metall. Trans, 1997, 28A,1271.
[23] S.J.Zhu, L.M.Peng, Z.Y.Ma, J.Bi and F.G.Wang andZ.G.Wang: Mater. Sci. Eng., 1996, A215, 120.
[24] L.M.Peng, S.J.Zhu, Z.Y.Ma, J.Bi, H.R.Chen andF.G.Wang: submitted to J. Mater. Sci.
[25] S.J.Zhu, Y.X.Lu, Z.G.Wang and J.Bi: J Mater. Sci.Lett., 1992, 13, 199.
[26] S.J.Zhu, Y.X.Lu, Z.G.Wang and J.Bi: Metal MatrixComposites, ed. A.Miravete, Woodhead PublishingLimited, Abington, Cambridge, 1993, 549.
[27] K.T.Park, E.J.Lavernia and F.A.Mohamed: ActaMetall., 1994, 42, 667.
[28] Zongyi MA, Xiaoguang NING, Jing PAN, Jihong LI,Yuxiong LU and Jing BI: Acta Metall. Sin., 1994, 30,B420. (in Chinese)
[29] R.Lagneborg and B.Bergman: Metal Sci., 1976, 10,20.
[30] J.Weertman: J. Appl Phys, 1957, 28, 1185.
[31] F.A.Mohamed and T.G.Langdon: Acta Metall., 1974,22, 779.
[32] J.Weertman: J. Appl. Phys., 1957, 28, 362.
[33] O.D.Sherby R.H.Klundt and A.K.Miller: Metall.Trans.,1977, 8A, 843.
[34] J.Cadek, V.Sustek and M.Pahuova: Mater. Sci.Eng., 1994, A174, 141.
[35] J.Cadek, H.Oikawa and V.Sustek: Mater. Sci. Eng.,1995, A190, 9.
[36] Y.Li and F.A.Mohamed: Acta Metall., 1997, 45, 4775.
[37] T.S.Lundy and J.F.Murdock: J. Appl. Phys.,1962,33, 1671.
[38] J.E.Bird, A.K.Mukherjee and J.E.Dorn: QuantitativeRelations between Properties and Microstructure,eds.D.G.Branbon and A.Rosen, Israel University Press,Jerusalem, 1969, 225.
[39] K.T.Park and F.A.Mohamed: Metall. Trans., 1995,26A, 3119.
[40] A.Kelly and K.N.Street: Proc.of Royal Society of London, 1972, A328, 283.
[41]T.L.Dragone, J.J.Schlautmann and W.D.Nix: Metall.Thans.,1991, 22A, 1029.

High Temperature Creep behaviour of a Si_3N_4 Whisker Reinforced Al-Fe-V-Si Composite

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments