J Mater Sci Technol ›› 1998, Vol. 14 ›› Issue (5): 411-414.

• Articles • Previous Articles     Next Articles

Microstructure and Mechanical Properties of Ti-35V-15Cr-0.05C Nonburning Titanium Alloy

Geping LI; Dong LI; Yuyin LIU; Qingjiang WANG and Shaoxuan GUAN (Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, China)Qingchun LI (Harbin Institute of Technology, Harbin 150001, China)   

  • Received:1998-09-28 Revised:1998-09-28 Online:1998-09-28 Published:2009-10-10

Abstract: Ti-35V15Cr-0.05C is a new nonburning titanium alloy. The structural analyses show that the alloy consists of β phase and lath-like α phase distributed within β grains, and some titanium carbide particles appear at grain boundaries. Using dark field TEM method, it was also found that TiCr2 phase uniformly precipitates in α phase. After heat treatment at 900℃ for 15 min,equiaxed β phase of 60~ 80μm in diameter and lath-like α phase of 1-2% volume fraction were observed. This alloy possesses attractive mechanical properties.