Abstract: The bond strength of the Sn based ternary active solders,Sn-5Ti with various contents of Ag,Cu,In, Ni or AI on sialon ceramic was investigated by the ceramic/ceramic joint joining.The bond strength of Sn-STi (about 80 MPa) may increase to 90-100 MPa by small addition of Ag or Cu (about 5-10%).A little Ni (about 1-3%) in the solder is slightly beneficial,but too more Ni (more than 5%) is harmful.Small addition of In is trivial,but too more In is detrimental.On the other hand,small addi- tion of AI in the active solder decreases greatly the bond strength of the solder,therefore it is very harmful.In discussion,three suggestions for selection of the third element to increase the bond strength of the soft solders on ceramic,i.e.with a high surface energy,benefiting to wetting on ce- ramic and strengthening the soft solder itself,have been made.

Key words: bond strength, Sn-Ti-X ternary solders, ceramic/ceramic joint