[1] |
Kai Wang, Lei Chen, Chenguang Xu, Wen Zhang, Zhanguo Liu, Yujin Wang, Jiahu Ouyang, Xinghong Zhang, Yudong Fu, Yu Zhou.
Microstructure and mechanical properties of (TiZrNbTaMo)C high-entropy ceramic
[J]. J. Mater. Sci. Technol., 2020, 39(0): 99-105.
|
[2] |
Qianqian Liu, Quan Zhang, Lu Zhang, Wei-Lin Dai.
Highly efficient single-crystalline NaNb1-XTaXO3 (X = 0.125) wires: The synergistic effect of tantalum-doping and morphology on photocatalytic hydrogen evolution
[J]. J. Mater. Sci. Technol., 2020, 54(0): 20-30.
|
[3] |
Varma S.K., Sanchez Francelia, Moncayo Sabastian, Ramana C.V..
Static and cyclic oxidation of Nb-Cr-V-W-Ta high entropy alloy in air from 600 to 1400 °C
[J]. J. Mater. Sci. Technol., 2020, 38(0): 189-196.
|
[4] |
Luhan Hao, Xiang Ji, Guangqian Zhang, Wei Zhao, Mingyue Sun, Yan Peng.
Carbide precipitation behavior and mechanical properties of micro-alloyed medium Mn steel
[J]. J. Mater. Sci. Technol., 2020, 47(0): 122-130.
|
[5] |
Xinyu Ren, Wei Liu, Haishui Ren, Yongjuan Jing, Wei Mao, Huaping Xiong.
Microstructures and joining characteristics of NbSS/Nb5Si3 composite joints by newly-developed Ti66-Ni22-Nb12 filler alloy
[J]. J. Mater. Sci. Technol., 2020, 58(0): 95-99.
|
[6] |
Wei Xu, Xin Lu, Jingjing Tian, Chao Huang, Miao Chen, Yu Yan, Luning Wang, Xuanhui Qu, Cuie Wen.
Microstructure, wear resistance, and corrosion performance of Ti35Zr28Nb alloy fabricated by powder metallurgy for orthopedic applications
[J]. J. Mater. Sci. Technol., 2020, 41(0): 191-198.
|
[7] |
Yinling Zhang, Aihan Feng, Shoujiang Qu, Jun Shen, Daolun Chen.
Microstructure and low cycle fatigue of a Ti2AlNb-based lightweight alloy
[J]. J. Mater. Sci. Technol., 2020, 44(0): 140-147.
|
[8] |
Heng Chen, Huimin Xiang, Fu-Zhi Dai, Jiachen Liu, Yiming Lei, Jie Zhang, Yanchun Zhou.
High porosity and low thermal conductivity high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1700-1705.
|
[9] |
Haojie Wang, Bin Wang, Zhaodong Wang, Yong Tian, R.D.K. Misra.
Optimizing the low-pressure carburizing process of 16Cr3NiWMoVNbE gear steel
[J]. J. Mater. Sci. Technol., 2019, 35(7): 1218-1227.
|
[10] |
Xu Zhang, Dianzhong Li, Yiyi Li, Shanping Lu.
Effect of aging treatment on the microstructures and mechanical properties evolution of 25Cr-20Ni austenitic stainless steel weldments with different Nb contents
[J]. J. Mater. Sci. Technol., 2019, 35(4): 520-529.
|
[11] |
Shuang Gao, Weiyi Yang, Jun Xiao, Bo Li, Qi Li.
Creation of passivated Nb/N p-n co-doped ZnO nanoparticles and their enhanced photocatalytic performance under visible light illumination
[J]. J. Mater. Sci. Technol., 2019, 35(4): 610-614.
|
[12] |
M. Todea, A. Vulpoi, C. Popa, P. Berce, S. Simon.
Effect of different surface treatments on bioactivity of porous titanium implants
[J]. J. Mater. Sci. Technol., 2019, 35(3): 418-426.
|
[13] |
Jinhu Zhang, Jinmin Liu, Dongsheng Xu, Jie Wu, Lei Xu, Rui Yang.
Characterization of the prior particle boundaries in a powder metallurgy Ti2AlNb alloy
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2513-2525.
|
[14] |
Wen-Wen Li, Bo Chen, La-Mei Cao, Wei Liu, Hua-Ping Xiong, Yao-Yong Cheng.
Joining of Cf/SiBCN composite with CuPd-V filler alloy
[J]. J. Mater. Sci. Technol., 2018, 34(9): 1652-1659.
|
[15] |
Minghui Cai, Hongshou Huang, Junhua Su, Hua Ding, Hodgson Peter D..
Enhanced tensile properties of a reversion annealed 6.5Mn-TRIP alloy via tailoring initial microstructure and cold rolling reduction
[J]. J. Mater. Sci. Technol., 2018, 34(8): 1428-1435.
|