[1] |
Hongxia Wan, Dongdong Song, Xiaolei Shi, Yong Cai, Tingting Li, Changfeng Chen.
Corrosion behavior of Al0.4CoCu0.6NiSi0.2Ti0.25 high-entropy alloy coating via 3D printing laser cladding in a sulphur environment
[J]. J. Mater. Sci. Technol., 2021, 60(0): 197-205.
|
[2] |
D.P. Opra, S.V. Gnedenkov, A.A. Sokolov, A.B. Podgorbunsky, A.Yu. Ustinov, V.Yu. Mayorov, V.G. Kuryavyi, S.L. Sinebryukhov.
Vanadium-doped TiO2-B/anatase mesoporous nanotubes with improved rate and cycle performance for rechargeable lithium and sodium batteries
[J]. J. Mater. Sci. Technol., 2020, 54(0): 181-189.
|
[3] |
Cheng Gu, Colin D. Ridgeway, Emre Cinkilic, Yan Lu, Alan A. Luo.
Predicting gas and shrinkage porosity in solidification microstructure: A coupled three-dimensional cellular automaton model
[J]. J. Mater. Sci. Technol., 2020, 49(0): 91-105.
|
[4] |
Paulina Kazimierczak, Aleksandra Benko, Krzysztof Palka, Cristina Canal, Dorota Kolodynska, Agata Przekora.
Novel synthesis method combining a foaming agent with freeze-drying to obtain hybrid highly macroporous bone scaffolds
[J]. J. Mater. Sci. Technol., 2020, 43(0): 52-63.
|
[5] |
F.H. Kuang, S.M. Wang, C. Gao, H.B. Zhang, R.K. Ren, J.L. Ren, J. Tong, Y.M. Liu, J. Liu.
Unique microstructure and thermal insulation property of a novel waste-utilized foam ceramic
[J]. J. Mater. Sci. Technol., 2020, 48(0): 175-179.
|
[6] |
B. Zhou, D. Wu, R.S. Chen, En-hou Han.
Enhanced tensile properties in a Mg-6Gd-3Y-0.5Zr alloy due to hot isostatic pressing (HIP)
[J]. J. Mater. Sci. Technol., 2019, 35(9): 1860-1868.
|
[7] |
Heng Chen, Huimin Xiang, Fu-Zhi Dai, Jiachen Liu, Yiming Lei, Jie Zhang, Yanchun Zhou.
High porosity and low thermal conductivity high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1700-1705.
|
[8] |
X.Y. Jiao, J. Wang, C.F. Liu, Z.P. Guo, G.D. Tong, S.L. Ma, Y. Bi, Y.F. Zhang, S.M. Xiong.
Characterization of high-pressure die-cast hypereutectic Al-Si alloys based on microstructural distribution and fracture morphology
[J]. J. Mater. Sci. Technol., 2019, 35(6): 1099-1107.
|
[9] |
Jingjing Liang, Yongsheng Liu, Jinguo Li, Yizhou Zhou, Xiaofeng Sun.
Epitaxial growth and oxidation behavior of an overlay coating on a Ni-base single-crystal superalloy by laser cladding
[J]. J. Mater. Sci. Technol., 2019, 35(2): 344-350.
|
[10] |
Jian Liu, Jia Li, Xu Cheng, Huaming Wang.
Microstructures and tensile properties of laser cladded AerMet100 steel coating on 300 M steel
[J]. J. Mater. Sci. Technol., 2018, 34(4): 643-652.
|
[11] |
Fariborz Tavangarian, Abbas Fahami, Guoqiang Li, Mohammadhassan Kazemi, Anoosha Forghani.
Structural characterization and strengthening mechanism of forsterite nanostructured scaffolds synthesized by multistep sintering method
[J]. J. Mater. Sci. Technol., 2018, 34(12): 2263-2270.
|
[12] |
Zhao Zhuang, Chen Jing, Guo Shuai, Tan Hua, Lin Xin, Huang Weidong.
Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti-6Al-4V titanium alloy
[J]. J. Mater. Sci. Technol., 2017, 33(7): 675-681.
|
[13] |
Wei Kai, Kim Kyu-Oh, Song Kyung-Hun, Kang Chang-Yong, Soon Lee Jung, Gopiraman Mayakrishnan, Kim Ick-Soo.
Nitrogen- and Oxygen-Containing Porous Ultrafine Carbon Nanofiber: A Highly Flexible Electrode Material for Supercapacitor
[J]. J. Mater. Sci. Technol., 2017, 33(5): 424-431.
|
[14] |
Jiang Fengrui,Cheng Laifei,Zhang Jiaxin,Wang* Yiguang.
Fabrication of barium-strontium aluminosilicate coatings on C/SiC composites via laser cladding
[J]. J. Mater. Sci. Technol., 2017, 33(2): 166-171.
|
[15] |
Wu Jie,Guo Ruipeng,Xu Lei,Lu Zhengguan,Cui Yuyou,Yang Rui.
Effect of Hot Isostatic Pressing Loading Route on Microstructure and Mechanical Properties of Powder Metallurgy Ti2AlNb Alloys
[J]. J. Mater. Sci. Technol., 2017, 33(2): 172-178.
|