Enhancing the mechanical properties and oxidation resistance of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C0.95 ceramics through nitrogen doping

doi:10.1016/j.jmst.2025.02.035

Abstract

Abstract: High-entropy carbide ceramics (HECCs) exhibit superior properties compared to their constituent binary compounds. However, high synthesis and sintering temperature are main obstacles that limit their widespread applications. To address this issue, compositional and particle size controllable high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_x powders were successfully prepared by a sugar hydrogel combined with the carbothermal reduction method. Owing to the introduction of carbon vacancy, the temperature for the formation of single-phase solid solution of the high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_x powders was decreased, and the addition of nitrogen decreased the densification temperature of the high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_0.95 ceramic by 200 °C. In addition, the flexural strength and fracture toughness of the high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_0.95 ceramic were improved by 29 % and 30 %, respectively, compared with those without nitrogen doping. Atomic-resolution high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive spectroscopy (EDS) mapping reveal that the segregation of N and small cation Ti as well as large lattice strains are responsible for the enhanced mechanical properties. Furthermore, with the introduction of nitrogen, the onset oxidation temperature (OOT) was increased, while the parabolic oxidation rate constant was decreased, revealing the beneficial effect of nitrogen doping on oxidation resistance. These results demonstrate that nitrogen doping can not only improve the mechanical properties of HECCs but also enhance the oxidation resistance, which paves the way for the wide application of HECCs.

Key words: High-entropy carbide ceramics, Nitrogen doping, Mechanical properties, Oxidation, Grain boundary segregation, Atomic resolution STEM

Liansen Xia, Peitao Hu, Shun Dong, Jianqiang Xin, Kaixuan Gui, Xinghong Zhang, Yanchun Zhou. Enhancing the mechanical properties and oxidation resistance of high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_0.95 ceramics through nitrogen doping[J]. J. Mater. Sci. Technol., 2025, 235: 12-27.

References

[1] J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Adv. Eng. Mater. 6(2004) 299-303.
[2] B. Cantor, I.T.H.Chang, P. Knight, A.J.B. Vincent, Mater. Sci. Eng. A. 375(2004) 213-218.
[3] C.M. Rost, E. Sachet, T. Borman, A. Moballegh, E.C. Dickey, D. Hou, J.L. Jones, S. Curtarolo, J.P. Mariaet, Nat. Commun. 6(2015) 8485.
[4] H. Xiang, Y. Xing, F.Z. Dai, H. Wang, L. Su, L. Miao, G. Zhang, Y. Wang, X. Qi, L. Yao, H. Wang, B. Zhao, J. Li, Y. Zhou, J. Adv. Ceram. 10(2021) 385-441.
[5] J. Wu, J. Zhang, X. Hu, H. Xie, L. Yan, F. Hou, J. Liu, X. Ma, A. Guo, Small 20 (2024) 2310615.
[6] F. Huang, H. Wang, C. Fang, M. Li, G. Shao, J. Zhu, Y. Zhou, J. Adv. Ceram. 13(2024) 101-112.
[7] Y. Tan, W. Liao, Z. Teng, H. Zhang, J. Am. Ceram.Soc. 106(2023) 4382-4389.
[8] F. Wang, X. Yan, T. Wang, Y. Wu, L. Shao, M. Nastasi, Y. Lu, B. Cui, Acta Mater. 195(2020) 739-749.
[9] W.M. Mellor, K. Kaufmann, O.F. Dippo, S.D. Figueroa, G.D. Schrader, K.S. Vecchio, J. Eur. Ceram.Soc. 41(2021) 5791-5800.
[10] Y. Tan, C. Chen, S. Li, X. Han, J. Xue, T. Liu, X. Zhou, H. Zhang, J. Alloys Compd. 816(2020) 152523.
[11] P. Sarker, T. Harrington, C. Toher, C. Oses, M. Samiee, J.P. Maria, D.W. Brenner, K.S. Vecchio, S. Curtarolo, Nat. Commun. 9(2018) 4980.
[12] W. Zhang, L. Chen, Z. Shi, W. Lu, S. Huo, Y. Wang, Y. Zhou, J. Eur. Ceram.Soc. 44(2024) 1385-1395.
[13] Y. Wang, R. Zhang, B. Zhang, O. Skurikhina, P. Balaz, V. Araullo-Peters, M. Reece, Corros. Sci. 176(2020) 109019.
[14] E. Castle, T. Csanádi, S. Grasso, J. Dusza, M. Reece, Sci. Rep. 8(2018) 8609.
[15] L. Chen, W. Zhang, Y. Tan, P. Jia, C. Xu, Y. Wang, X. Zhang, J. Han, Y. Zhou, J. Eur. Ceram.Soc. 41(2021) 60-67.
[16] K. Wang, L. Chen, C. Xu, W. Zhang, Z. Liu, Y. Wang, J. Ouyang, X. Zhang, Y. Fu, Y. Zhou, J. Mater. Sci.Technol. 39(2020) 99-105.
[17] S. Luo, W. Guo, K. Plucknett, H. Lin, J. Adv. Ceram. 11(2022) 805-813.
[18] M. Ma, Y. Sun, Y. Wu, Z. Zhao, L. Ye, Y. Chu, J. Am. Ceram.Soc. 105(2022) 606-613.
[19] L. Feng, W.G. Fahrenholtz, G.E. Hilmas, J. Am. Ceram.Soc. 102(2019) 7217-7224.
[20] S. Ning, T. Wen, B. Ye, Y. Chu, J. Am. Ceram.Soc. 103(2020) 2244-2251.
[21] B. Du, H. Liu, Y. Chu, J. Am. Ceram.Soc. 103(2020) 4063-4068.
[22] J. Pötschke, M. Dahal, A. Vornberger, M. Herrmann, A. Michaelis, Metals 11 (2021) 271.
[23] J. Liu, J. Xiong, Z. Guo, H. Zhou, T. Yang, L. Yang, W. Zhao, Metall. Mater. Trans. A 51 (2020) 6706-6713.
[24] J. Song, G. Chen, H. Xiang, F. Dai, S. Dong, W. Han, X. Zhang, Y. Zhou, J. Mater. Sci.Technol. 121(2022) 181-189.
[25] G. Samsonov, Powder Metall. Metal Ceram. 47(2008) 13-20.
[26] C. Jing, S. Zhou, W. Zhang, Z. Ding, Z. Liu, Y. Wang, J. Ouyang, J. Alloys Compd. 927(2022) 167095.
[27] K. Xiong, L. Yang, F. Wang, S. Zhang, L. You, H. Wu, Y. Mao, J. Alloys Compd. 930(2023) 167378.
[28] P. Zhang, X. Liu, A. Cai, Q. Du, X. Yuan, H. Wang, Y. Wu, S. Jiang, Z. Lu, Sci. China Mater. 64(2021) 2037-2044.
[29] N. Ding, H. Jiang, C. Xu, L. Shao, B. Tang, Ceram. Int. 48(2022) 35353-35364.
[30] L. Xia, S. Dong, J. Xin, K. Gui, P. Hu, Y. Xie, D. Yang, X. Zhang, Y. Zhou, J. Adv. Ceram. 12(2023) 1258-1272.
[31] Z. Peng, W. Sun, X. Xiong, H. Zhang, F. Guo, J. Li, Corros. Sci. 184(2021) 109359.
[32] B. Sun, D. Chen, Y. Cheng, W. Fei, D. Jiang, S. Tang, G. Zhao, J. Song, C. Hou, W. Zhang, S. Wu, Y. Yang, M. Tan, J. Zhang, D. Wei, C. Guo, W. Zhang, S. Dong, S. Du, J. Han, J. Luo, X. Zhang, Adv. Mater. 34(2022) 2200363.
[33] M. Tan, D. Chen, Y. Cheng, H. Sun, G. Chen, S. Dong, G. Zhao, B. Sun, S. Wu, W. Zhang, J. Han, W. Han, X. Zhang, Adv. Funct. Mater. 32(2022) 2202057.
[34] Y. Zhang, B. Liu, J. Wang, Sci. Rep. 5(2015) 18098.
[35] C. Gasparrini, D. Rana, N. Brun, D. Horlait, C. Markides, I. Farnan, W. Lee, Sci. Rep. 10(2020) 6347.
[36] X. Yan, L. Constantin, Y. Lu, J. Silvain, M. Nastasi, B. Cui, J. Am. Ceram.Soc. 101(2018) 4486-4491.
[37] X. Liu, Y. Lu, Q. Xu, L. Yang, H. Shen, W. Sun, X. Zhang, Y. Wang, J. Adv. Ceram. 12(2023) 565-577.
[38] L. Tan, X. Su, J. Yang, P. Ji, F. Sun, Q. Tian, Z. Zhao, J. Adv. Ceram. 12(2023) 498-509.
[39] L. Feng, W.G. Fahrenholtz, G.E. Hilmas, Y. Zhou, Scr. Mater. 162(2019) 90-93.
[40] J. Li, Y. Zhou, Y. Su, S. Chen, Q. Sun, H. Fan, J. Song, L. Hu, Y. Zhang, J. Adv. Ceram. 12(2023) 242-257.
[41] K. Vasanthakumar, R. Gorle, S. Ariharan, S.R. Bakshi, J. Eur. Ceram.Soc. 41(2021) 6756-6762.
[42] S. Luo, W. Guo, Z. Fang, K. Plucknett, H. Lin, J. Eur. Ceram.Soc. 42(2022) 336-343.
[43] W. Zhang, L. Chen, W. Lu, S. Huo, B. Wei, Y. Wang, Y. Zhou, J. Eur. Ceram.Soc. 42(2022) 6347-6355.
[44] D. An, X. Luo, P. Liu, Z. Xie, T. Li, Mater. Mech. Eng. 42(2018) 53-57.
[45] Z. Sun, Y. Li, M. Liu, H. Jin, Y. Zhao, Small 19 (2023) 2301230.
[46] J. Liu, C. Li, Y. Zou, A. Chen, L. Hu, Y. Shi, Ceram. Int. 47(2021) 15682-15694.
[47] K. Lu, J. Liu, X. Wei, W. Bao, Y. Wu, F. Li, F. Xu, G. Zhang, J. Eur. Ceram.Soc. 40(2020) 1839-1847.
[48] F. Wang, X. Zhang, X. Yan, Y. Lu, M. Nastasi, Y. Chen, B. Cui, J. Am. Ceram.Soc. 103(2020) 4463-4472.
[49] Y. Tan, W. Liao, Z. Teng, X. Zhou, J. Am. Ceram.Soc. 107(2024) 2565-2572.
[50] D. Demirskyi, H. Borodianska, T. Suzuki, Y. Sakka, K. Yoshimi, O. Vasylkiv, Scr. Mater. 164(2019) 12-16.
[51] W. Zhang, K. Li, L. Chen, Z. Shi, S. Huo, B. Kang, Y. Wang, B. Wei, Y. Zhou, J. Eur. Ceram.Soc. 44(2024) 1396-1403.
[52] Z. Tang, Z. Wen, Y. Liu, L. Zhuang, H. Yu, Y. Chu, Adv. Funct. Mater. 34(2023) 2312239.
[53] Y. Wang, X. Wang, S. Li, M.J. Reece, Corros. Sci. 225(2023) 111583.
[54] V. Suvorova, D. Suvorov, S. Volodko, M. Poliakov, L. Volkova, A. Nepapushev, D. Moskovskikh, J. Eur. Ceram.Soc. 45(2025) 116980.
[55] C. Li, H. Wang, L. Luo, Z. Chen, L. Duan, K. Ren, Y. Wang, J. Eur. Ceram.Soc. 44(2024) 116793.
[56] F. Dai, B. Wen, Y. Sun, Y. Ren, H. Xiang, Y. Zhou, J. Mater. Sci.Technol. 123(2022) 26-33.
[57] F. Dai, Y. Sun, Y. Ren, H. Xiang, Y. Zhou, J. Mater. Sci.Technol. 101(2022) 234-241.
[58] X. Guo, X. Xin, W. Bao, X. Wang, Q. Yang, Y. Zeng, G. Zhang, F. Xu, J. Am. Ceram.Soc. 105(2022) 5984-5993.
[59] X. Guo, W. Bao, J. liu, X.Wang, G. Zhang, F. Xu, J. Inorg. Mater. 36(2021) 365-371.

Enhancing the mechanical properties and oxidation resistance of high-entropy (Ti_0.2Zr_0.2Hf_0.2Nb_0.2Ta_0.2)C_0.95 ceramics through nitrogen doping

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Haobo Ma, Jing Li, Yongli Wang, Jiawei Wang, Shi Liu, Liangyin Xiong. Evolution of oxide nanoparticles during thermomechanical processing and its influence on mechanical properties of a 12Cr ODS alloy [J]. J. Mater. Sci. Technol., 2025, 231(0): 62-76.
[2]	Wandong Wang, Tianyi Lyu, Hyun Suk Choi, Changjun Cheng, Yu Zou. Wear mechanism transitions in FeCoNi and CrCoNi medium-entropy alloys from room temperature to 1000 °C [J]. J. Mater. Sci. Technol., 2025, 231(0): 151-163.
[3]	F.S. Li, L.H. Wu, H.J. Li, P.T. Hua, D.R. Ni, P. Xue, B.L. Xiao, Z.Y. Ma. Simultaneously enhanced strength and impact toughness in electron beam welded joints of near β titanium alloy thick plates via good coupling of multi-level lamellar microstructures [J]. J. Mater. Sci. Technol., 2025, 232(0): 28-42.
[4]	Bin Qi, Rongchen Shen, Zhiqiang Ren, Yuan Teng, Huiling Ding, Xin Zhang, Youzi Zhang, Lei Hao, Xin Li. Bifunctional S-scheme sp²-carbon COF/CdS heterojunction for efficient photocatalytic H₂ evolution and C-C coupling of 5-hydroxymethylfurfural [J]. J. Mater. Sci. Technol., 2025, 232(0): 65-73.
[5]	Qing Cheng, Fusheng Tan, Prajna Paramita Mohapatra, Wenquan Ming, Jun Ding, Qingyang Gao, Mingwei Chen, Jianghua Chen, Xiandong Xu, En Ma. Amplifying Suzuki segregation and hardening in a concentrated solid solution alloy [J]. J. Mater. Sci. Technol., 2025, 232(0): 156-169.
[6]	Ting Chen, Banglong Fu, Uceu F.H.R. Suhuddin, Tong Shen, Gaohui Li, Emad Maawad, Junjun Shen, Jorge F dos Santos, Jean Pierre Bergmann, Benjamin Klusemann. Improving mechanical properties of constrained friction processing Mg-Zn-Ca alloys by modifying texture using multiple pass processing [J]. J. Mater. Sci. Technol., 2025, 232(0): 209-226.
[7]	Y.P. Dong, C.T. Zhou, D.W. Wang, X.P. Luo, D. Wang, C.H. Song, J. Zhang, M. Yan. Achieving 1.5 GPa superstrong Ti-6Al-4V using cold plastic deformed powder feedstock and laser additive manufacturing [J]. J. Mater. Sci. Technol., 2025, 233(0): 144-153.
[8]	Xuejie Zhu, Xuexi Zhang, Mingfang Qian, Lin Geng. Microstructure evolution during superelastic cycles and related elastocaloric effect in N-doped Ti-based shape memory alloys [J]. J. Mater. Sci. Technol., 2025, 234(0): 1-14.
[9]	Qingyi Kong, Qinchen Liu, Lei Chen, Sijia Huo, Kunxuan Li, Mingxuan Mao, WeiWei Sun, Yujin Wang, Suk-Joong L. Kang, Yu Zhou. Uncovering the hardening mechanism of multi-component carbide ceramics based on the coupling effect of covalent bond enhancement and lattice distortion [J]. J. Mater. Sci. Technol., 2025, 234(0): 102-112.
[10]	Shuaishuai Liu, Xiang Chen, Tianjiao Li, Wenhuan Chen, Liping Zhong, Yongjian Wang, Manoj Gupta, Guangsheng Huang, Bin Jiang, Fusheng Pan. Mechanical properties and deformation behavior of Mg-Al-Zn alloy laminate with multi-scale heterostructures [J]. J. Mater. Sci. Technol., 2025, 234(0): 134-150.
[11]	Hao Mei, Yong Shang, Haiyuan Yu, Yuan Liu, Yuanhang Gao, Wenqi Guo, Wenwen Wang, Keke Chang, Yuwei Guo, Yanling Pei, Shusuo Li, Shengkai Gong. Oxidation behavior of CoNiCrAlY bond coatings with single/double layer structure in water vapor environment at 1100 ℃ [J]. J. Mater. Sci. Technol., 2025, 234(0): 164-180.
[12]	Xiaowen Yang, Lanlan Yang, Yiliang Lu, Jinlong Wang, Shasha Yang, Zehao Chen, Qiang Zhang, Minghui Chen, Yanxin Qiao, Fuhui Wang. Synergistic effect of element modification and preoxidation on hot corrosion behaviour of the nanocrystalline coating under molten salt of 75 wt.% Na₂SO₄ + 25 wt.% NaCl at 900 °C [J]. J. Mater. Sci. Technol., 2025, 235(0): 53-69.
[13]	Abdukadir Amar, Mingliang Wang, Rui Huang, Lingkun Zhang, Yiping Lu. Achieving high strength and ductile eutectic high-entropy alloy with directional lamellar via laser additive manufacturing [J]. J. Mater. Sci. Technol., 2025, 235(0): 70-80.
[14]	Chenghao Pei, Qingshuang Ma, Jingwen Zhang, Liming Yu, Huijun Li, Qiuzhi Gao, Jie Xiong. A novel model to predict oxidation behavior of superalloys based on machine learning [J]. J. Mater. Sci. Technol., 2025, 235(0): 232-243.
[15]	Shiyan Chen, Zhaoke Chen, Weilong Song, Yi Zeng, Fengminyu Xie,Zhennan Xu, Xiang Xiong. Formation mechanism and microstructural evolution of bubbles during ultra-high temperature oxidation of multicomponent carbides [J]. J. Mater. Sci. Technol., 2025, 236(0): 122-135.