[1] M.D.Chen, R.Q.Hsu and K.H.Fuh: Int. J. Mach. Tool. Manu., 2001, (41). 1721.
[2] S.Kobayashi, I.K.Hall and E.G.Thomsen: Trans. ASME, J. Eng. Industry, 1961, (83), 485.
[3 ] S.Kobayashi: Trans. ASME, J. Eng. Industry, 1963, (83), 44.
[4 ] S.Kalpakcioglu: Trans. ASME, J. Eng. Industry, 1961, (83), 125.
[5 ] B.Avitzur and C.T.Yang: Thins. ASME, J. Eng. Industry, 1960, (82), 231.
[6 ] J.N.Feola: Master Thesis, Syracuse University, 1955, 20.
[7 ] Kuoxian CHEN: Power Spinning Techniques and Equipment, eds. Kuoxian CHEN and Wenduo JIA, 1st ed., National Defence Industry Press, Beijing, 1986, 42. (in Chinese)
[8 ] Chenghe WANG: Spinning Technology, eds. Chenghe WANG and Kezhang LIU, 1st ed., China Mechanical Industry Press, Beijing, 1986, 564. (in Chinese)
[9 ] Kuoxian CHEN and Tianquan ZHAO: Appl. Tech-nol. Forum Proceedings First Nationwide Continuous Local Plastic Forming, 1984, 1. (in Chinese)
[10] Wenchen XU: Master Thesis, Harbin Institute of Technology, 2001, 47. (in Chinese)
[11] Zhihui WANG: Master Thesis, Harbin Institute of Technology, 1997, 60. (in Chinese)
[12] E.Quigley and J.Monaghan: J. Mater. Process. Technol., 2002, (121), 43.
[13] Dachang RANG, Xicheng GAO, Xiaofeng MENG and Zhihui WANG: J. Mater. Process. Technol., 1999, (91), 226.
[14] Jianhua LIU, He YANG and Yuqiang LI: J. Mater. Process. Technol., 2002, (129), 326.
[15] E.Quigley and J.Monaghan: J. Mater. Process. Tech- nol, 2002, (124), 360.
[16] Fuan HUA, Yuansheng YANG and Yunan ZHANG: J. Mater. Process. Technol., 2005, (168), 68.
[17] Stefan Hauk, Victor H.Vazquez and Taylan Altan: J. Mater. Process. Technol., 2000, (98), 70.
[18] MARC Analysis and Research Corp, Palo Alto, USA: MARC K7.3 User Theory, Vol. D, 5-53.
[19] Ying LIU, Xinyu LU and Benxian WANG: Die and Mould Technol., 2004, (4), 1. (in Chinese)
[20] Lei NIE, Puguo LI and Yong FANG: Aerospace Mater. Technol., 2001, 21(3), 13. (in Chinese)N |
WeChat
