Novel magnetorheological suspensions based on Co-phthalocyanine/Fe nanocomposite particles

Abstract

Abstract: A novel magnetorheological (MR) suspension was based on methyl silicone oil and cobalt-phthalocyanine (Co-Pc)/Fe nanocomposite particles, which were synthesized by thermally decomposing liquid carbonyl Fe in the solution of Co-Pc in N, N-dimethyl formamide. The nanocomposite particles were fully characterized by XRD, SEM and HREM, and the thermal, magnetic and MR properties of nanocomposite particles were measured. Such factors as weight percent of particles (w), magnetic field strength (H), temperature (T) and shear rate (gamma) etc influencing on MR properties were investigated. The results indicated that Co-Pc/Fe nanocomposite with density of 3.66 g/cm(3) was almost micro-sized regular spheroids consisting of tens of Co-Pc coated alpha -Fe nanoparticles in inner and Co-Pc layers on surface of the spheroids. They showed good characteristics of anti-oxidation and soft magnetic. Increment of w increased field-induced shear stress (Delta tau) and zero-field viscosity (eta (0)) of MR suspensions monotonously, and improved anti-settlement stability, but eta (0) increased more markedly than Delta tau with increasing w. Delta tau was basically independent on T and gamma while increased obviously with increasing H. With increasing T, response time of the MR suspension to external magnetic field seemed to decrease. As a result, MR suspensions with satisfactory stability and rapid, completely reversible and significant MR effect can be obtained from Co-Pc/Fe nanocomposite particles.

Key words:

Rongzhou GONG, Zekun FENG, Jianguo GUAN, Runzhang YUAN. Novel magnetorheological suspensions based on Co-phthalocyanine/Fe nanocomposite particles[J]. J Mater Sci Technol, 2001, 17(05): 511-516.

References

[1] Jr.B.F.Spencer and M.K.Sain: IEEE Control System, 1997, 17(6), 19.
[2] P.P.Phule and .J.M.Ginder: Proc. of the 6th Int. Conf. on Electro-Rheological Fluids, MagnetoRheological Suspensions and Their Applications, eds. by M.Nakano and K.Koyama, World Scientific, Singapore, 1998, 445.
[3] J.Huang, J.G.Guan, W.Y.Chen and R.Z.Yuan: J. Wuhan Univ. Tech. Mater. Sci., 1998, 13(3), 1.
[4] Lin HU, Seng PAN, Jianyao WU, Meng SUN and Luwei ZHOU: Evolution of Liquid Physics(1), Wuhan Univ. Press, 1997, 276. (in Chinese)
[5] Jianguo GUAN: Advanced Materials of Electrorheological Fluid, in: Chinese Macromolecule Science at the Crossing the Century-Advanced Materials and Technology of Functional Polymer, eds. by H.J.HU, T.B.HE, Chemical Industry Press, Beijing, 2000, Chapter 20. (in Chinese)
[6] W.I.Kordonski, S.R.Gorodkin and Z.A.Novikova:Proc. of the 6th Int. Conf. on Electro-RheologicalFluids, Magneto-Rheological Suspensions and TheirApplications, eds. by M.Nakano, K.Koyama WorldScientific, Singapore, 1998, 535.
[7] Z.Y.Chen, X.Tang, G.C.Zhang, Y.Jin, W.Ni andY.R.Zhu: Proc. of the 6th Int. Conf. on Electro-Rheological Fluids, Magneto-Rheological Suspensions and Their Applications, eds. by M.Nakano, K.Koyama, World Scientific, Singapore, 1998, 486.
[8] C.Kormann, M.Laun and R.J.Richter: Proc of the 5th Int. Conf. on ER Fluids, MR Suspensions and Associated Technology, ed. by W.A.Bullough, World Scientific, Singapore, 1996, 362.
[9] Jun HUANG: Ph. D. Dissertation of Wuhan University of Technology, Wuhan, 1998.
[10] Jianguo GUAN, Suling ZHAO, Hanjie HU and Runzhang YUAN: Chinese Patent No. 99 1 16542.X, 1999.
[11] Jianguo GUAN, Jun HUANG, Suling ZHAO and Runzhang YUAN: Int. J. Modern Phys., 2000. (to be pressed)
[12] Keming FANG: Chinese Patent No. 85 1 05876.1, 1985.
[13] S.P.Armes, S.Gottesfeld, J.G.Beery, F.Garzon and S.F.Agnew: Polymer, 1991, 32(13), 2325."

[1]	Hui Liu, Rui Liu, Ihsan Ullah, Shuyuan Zhang, Ziqing Sun, Ling Ren, Ke Yang. Rough surface of copper-bearing titanium alloy with multifunctions of osteogenic ability and antibacterial activity [J]. J. Mater. Sci. Technol., 2020, 48(0): 130-139.
[2]	H.F. Zhang, H.L. Yan, H. Yu, Z.W. Ji, Q.M. Hu, N. Jia. The effect of Co and Cr substitutions for Ni on mechanical properties and plastic deformation mechanism of FeMnCoCrNi high entropy alloys [J]. J. Mater. Sci. Technol., 2020, 48(0): 146-155.
[3]	Zhaozhao Wang, Jia Li, Junjun Xu, Jinhua Huang, Ye Yang, Ruiqin Tan, Guofei Chen, Xingzhong Fang, Yue Zhao, Weijie Song. Robust ultrathin and transparent AZO/Ag-SnO_x/AZO on polyimide substrate for flexible thin film heater with temperature over 400 °C [J]. J. Mater. Sci. Technol., 2020, 48(0): 156-162.
[4]	J.J.J. Nivas, E. Allahyari, A. Vecchione, Q. Hao, S. Amoruso, X. Wang. Laser ablation and structuring of CdZnTe with femtosecond laser pulses [J]. J. Mater. Sci. Technol., 2020, 48(0): 180-185.
[5]	Y.Z. Tian, Y.P. Ren, S. Gao, R.X. Zheng, J.H. Wang, H.C. Pan, Z.F. Zhang, N.T suji, G.W. Qin. Two-stage Hall-Petch relationship in Cu with recrystallized structure [J]. J. Mater. Sci. Technol., 2020, 48(0): 31-35.
[6]	Heng Chen, Zifan Zhao, Huimin Xiang, Fu-Zhi Dai, Wei Xu, Kuang Sun, Jiachen Liu, Yanchun Zhou. High entropy (Y_0.2Yb_0.2Lu_0.2Eu_0.2Er_0.2)₃Al₅O₁₂: A novel high temperature stable thermal barrier material [J]. J. Mater. Sci. Technol., 2020, 48(0): 57-62.
[7]	Enze Zhou, Jianjun Wang, Masoumeh Moradi, Huabing Li, Dake Xu, Yuntian Lou, Jinheng Luo, Lifeng Li, Yulei Wang, Zhenguo Yang, Fuhui Wang, Jessica A. Smith. Methanogenic archaea and sulfate reducing bacteria induce severe corrosion of steel pipelines after hydrostatic testing [J]. J. Mater. Sci. Technol., 2020, 48(0): 72-83.
[8]	Jiangguli Peng, Wenbin Liu, Jiangtao Zeng, Liaoying Zheng, Guorong Li, Anthony Rousseau, Alain Gibaud, Abdelhadi Kassiba. Large electromechanical strain at high temperatures of novel <001> textured BiFeGaO₃-BaTiO₃ based ceramics [J]. J. Mater. Sci. Technol., 2020, 48(0): 92-99.
[9]	Li Zhang, Zhong Xu, Jia Han, Lei Liu, Cong Ye, Yi Zhou, Wen Xiong, Yanxin Liu, Gang He. Resistive switching performance improvement of InGaZnO-based memory device by nitrogen plasma treatment [J]. J. Mater. Sci. Technol., 2020, 49(0): 1-6.
[10]	Xiao-Yuan Wang, Yu-Fei Wang, Cheng Wang, Shun Xu, Jian Rong, Zhi-Zheng Yang, Jin-Guo Wang, Hui-Yuan Wang. A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy [J]. J. Mater. Sci. Technol., 2020, 49(0): 117-125.
[11]	Jing Xu, Zhouping Wang, Yongfa Zhu. Highly efficient visible photocatalytic disinfection and degradation performances of microtubular nanoporous g-C₃N₄ via hierarchical construction and defects engineering [J]. J. Mater. Sci. Technol., 2020, 49(0): 133-143.
[12]	Zhiliang Jin, Lijun Zhang. Performance of Ni-Cu bimetallic co-catalyst g-C₃N₄ nanosheets for improving hydrogen evolution [J]. J. Mater. Sci. Technol., 2020, 49(0): 144-156.
[13]	Zhuowei Tan, Liuyang Yang, Dalei Zhang, Zhenbo Wang, Frank Cheng, Mingyang Zhang, Youhai Jin. Development mechanism of internal local corrosion of X80 pipeline steel [J]. J. Mater. Sci. Technol., 2020, 49(0): 186-201.
[14]	Ying-Jun Gao, Qian-Qian Deng, Zhe-yuan Liu, Zong-Ji Huang, Yi-Xuan Li, Zhi-Rong Luo. Modes of grain growth and mechanism of dislocation reaction under applied biaxial strain: Atomistic and continuum modeling [J]. J. Mater. Sci. Technol., 2020, 49(0): 236-250.
[15]	Yanke Liu, Yulong Cai, Chenggang Tian, Guoliang Zhang, Guoming Han, Shihua Fu, Chuanyong Cui, Qingchuan Zhang. Experimental investigation of a Portevin-Le Chatelier band in Ni‒Co-based superalloys in relation to γʹ precipitates at 500 ℃ [J]. J. Mater. Sci. Technol., 2020, 49(0): 35-41.