[1] |
H. Niu, H.C. Jiang, M.J. Zhao, L.J. Rong.
Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding
[J]. J. Mater. Sci. Technol., 2021, 61(0): 16-24.
|
[2] |
Jixin Yang, Yiqiang Chen, Yongjiang Huang, Zhiliang Ning, Baokun Liu, Chao Guo, Jianfei Sun.
Hierarchical microstructure of a titanium alloy fabricated by electron beam selective melting
[J]. J. Mater. Sci. Technol., 2020, 42(0): 1-9.
|
[3] |
Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, Kenta Yamanaka, Akihiko Chiba.
Isothermal γ → ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing
[J]. J. Mater. Sci. Technol., 2020, 50(0): 162-170.
|
[4] |
Liang Lan, Xinyuan Jin, Shuang Gao, Bo He, Yonghua Rong.
Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening
[J]. J. Mater. Sci. Technol., 2020, 50(0): 153-161.
|
[5] |
Liao Wang, Shujun Li, Mengning Yan, Yubo Cheng, Wentao Hou, Yiping Wang, Songtao Ai, Rui Yang, Kerong Dai.
Fatigue properties of titanium alloy custom short stems fabricated by electron beam melting
[J]. J. Mater. Sci. Technol., 2020, 52(0): 180-188.
|
[6] |
Chavez Juan J.Gomez, Ravisankar Naraparaju, Peter Mechnich, Klemens Kelm, Uwe Schulz, C.V. Ramana.
Effects of yttria content on the CMAS infiltration resistance of yttria stabilized thermal barrier coatings system
[J]. J. Mater. Sci. Technol., 2020, 43(0): 74-83.
|
[7] |
Xiaochun He, Yang Li, Yongjie Bi, Xiaomei Liu, Bing Zhou, Shangzhou Zhang, Shujun Li.
Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting
[J]. J. Mater. Sci. Technol., 2020, 44(0): 191-200.
|
[8] |
O. Kapitanova Olesya, V. Emelin Evgeny, G. Dorofeev Sergey, V. Evdokimov Pavel, N. Panin Gennady, Lee Youngmin, Lee Sejoon.
Direct patterning of reduced graphene oxide/graphene oxide memristive heterostructures by electron-beam irradiation
[J]. J. Mater. Sci. Technol., 2020, 38(0): 237-243.
|
[9] |
Shilin Zhang, Yingjie Ma, Sensen Huang, Sabry S. Youssef, Min Qi, Hao Wang, Jianke Qiu, Jiafeng Lei, Rui Yang.
Temperature-gradient induced microstructure evolution in heat-affected zone of electron beam welded Ti-6Al-4V titanium alloy
[J]. J. Mater. Sci. Technol., 2019, 35(8): 1681-1690.
|
[10] |
Woo Jin Lee, Jisoo Kim, Hyung Wook Park.
Improved corrosion resistance of Mg alloy AZ31B induced by selective evaporation of Mg using large pulsed electron beam irradiation
[J]. J. Mater. Sci. Technol., 2019, 35(5): 891-901.
|
[11] |
Lawrence E.Murr.
Strategies for creating living, additively manufactured, open-cellular metal and alloy implants by promoting osseointegration, osteoinduction and vascularization: An overview
[J]. J. Mater. Sci. Technol., 2019, 35(2): 231-241.
|
[12] |
Neng Li, Shuai Huang, Guodong Zhang, Renyao Qin, Wei Liu, Huaping Xiong, Gongqi Shi, Jon Blackburn.
Progress in additive manufacturing on new materials: A review
[J]. J. Mater. Sci. Technol., 2019, 35(2): 242-269.
|
[13] |
Kun Yang, Jian Wang, Liang Jia, Guangyu Yang, Huiping Tang, Yuanyuan Li.
Additive manufacturing of Ti-6Al-4V lattice structures with high structural integrity under large compressive deformation
[J]. J. Mater. Sci. Technol., 2019, 35(2): 303-308.
|
[14] |
Liu Z., Zhao Z.B., Liu J.R., Wang L., Zhu S.X., Yang G., Gong S.L., Wang Q.J., ang R.Y.
Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2552-2558.
|
[15] |
Liu Guoliang, Yang Shanwu, Ding Jianwen, Han Wentuo, Zhou Lujun, Zhang Mengqi, Zhou Shanshan, Misra R.D.K., Wan Farong, Shang Chengjia.
Formation and evolution of layered structure in dissimilar welded joints between ferritic-martensitic steel and 316L stainless steel with fillers
[J]. J. Mater. Sci. Technol., 2019, 35(11): 2665-2681.
|