Fretting Fatigue Improvement of Ti6Al4V by Coating and Shot Peening

Search for articles:

J Mater Sci Technol ›› 2005, Vol. 21 ›› Issue (02): 246-250.

• Research Articles • Previous Articles Next Articles

Fretting Fatigue Improvement of Ti6Al4V by Coating and Shot Peening

Daoxin LIU, Xiaodong ZHU, Bin TANG, Jiawen HE

Northwestern Polytechnical University, Xi'an 710072, China...

Received:2004-02-20 Revised:2004-06-30 Online:2005-03-28 Published:2009-10-10
Contact: Daoxin LIU

Abstract

Abstract: Ion beam enhanced deposition (IBED) was employed to increase the fretting fatigue resistance of Ti6Al4V. CrN and TiN hard coatings were applied on the base material and shot peening was combined with the hard coatings to study the duplex effect on fretting fatigue resistance. The IBED coatings exhibited a good bonding strength. They did not spall off even after shot peening. However, an optimum composition of CrN showed better fretting fatigue resistance than that of TiN with the same processing parameters.

Key words: Fretting fatigue, Ti-alloy, Shot peening, Coatings

Daoxin LIU, Xiaodong ZHU, Bin TANG, Jiawen HE. Fretting Fatigue Improvement of Ti6Al4V by Coating and Shot Peening[J]. J Mater Sci Technol, 2005, 21(02): 246-250.

About JMST

Authors and reviewers

Contact

WeChat

[1]	C. Garcia-Cabezon, C. Garcia-Hernandez, M.L. Rodriguez-Mendez, F. Martin-Pedrosa. A new strategy for corrosion protection of porous stainless steel using polypyrrole films [J]. J. Mater. Sci. Technol., 2020, 37(0): 85-95.
[2]	Lin Chen, Mingyu Hu, Jun Guo, Xiaoyu Chong, Jing Feng. Mechanical and thermal properties of RETaO₄ (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase [J]. J. Mater. Sci. Technol., 2020, 52(0): 20-28.
[3]	Haifeng Chen, Yizhou Shen, Zhaoru He, Zhengwei Wu, Xinyu Xie. Facilely fabricating superhydrophobic coated-mesh materials for effective oil-water separation: Effect of mesh size towards various organic liquids [J]. J. Mater. Sci. Technol., 2020, 51(0): 151-160.
[4]	Heng Chen, Zifan Zhao, Huimin Xiang, Fu-Zhi Dai, Wei Xu, Kuang Sun, Jiachen Liu, Yanchun Zhou. High entropy (Y_0.2Yb_0.2Lu_0.2Eu_0.2Er_0.2)₃Al₅O₁₂: A novel high temperature stable thermal barrier material [J]. J. Mater. Sci. Technol., 2020, 48(0): 57-62.
[5]	Paul C. Uzoma, Fuchun Liu, En-Hou Han. Multi-stimuli-triggered and self-repairable fluorocarbon organic coatings with urea-formaldehyde microcapsules filled with fluorosilane [J]. J. Mater. Sci. Technol., 2020, 45(0): 70-83.
[6]	Jingchen Li, Liangliang Wei, Jian He, Hao Chen, Hongbo Guo. The role of Re in improving the oxidation-resistance of a Re modified PtAl coating on Mo-rich single crystal superalloy [J]. J. Mater. Sci. Technol., 2020, 58(0): 63-72.
[7]	Siavash Ghanbari, David F. Bahr. Predictions of decreased surface roughness after shot peening using controlled media dimensions [J]. J. Mater. Sci. Technol., 2020, 58(0): 120-129.
[8]	P.A. Morton, H.C. Taylor, L.E. Murr, O.G. Delgado, C.A. Terrazas, R.B. Wicker. In situ selective laser gas nitriding for composite TiN/Ti-6Al-4V fabrication via laser powder bed fusion [J]. J. Mater. Sci. Technol., 2020, 45(0): 98-107.
[9]	Enkang Hao, Yulong An, Xia Liu, Yijing Wang, Huidi Zhou, Fengyuan Yan. Effect of annealing treatment on microstructures, mechanical properties and cavitation erosion performance of high velocity oxy-fuel sprayed NiCoCrAlYTa coating [J]. J. Mater. Sci. Technol., 2020, 53(0): 19-31.
[10]	Chang-Yang Li, Xiao-Li Fan, Rong-Chang Zeng, Lan-Yue Cui, Shuo-Qi Li, Fen Zhang, Qing-Kun He, M. Bobby Kannan, , Dong-Chu Chen, Shao-Kang Guan. Corrosion resistance of in-situ growth of nano-sized Mg(OH)₂ on micro-arc oxidized magnesium alloy AZ31—Influence of EDTA [J]. J. Mater. Sci. Technol., 2019, 35(6): 1088-1098.
[11]	Bin Liu, Yuchen Liu, Changhua Zhu, Huimin Xiang, Hongfei Chen, Luchao Sun, Yanfeng Gao, Yanchun Zhou. Advances on strategies for searching for next generation thermal barrier coating materials [J]. J. Mater. Sci. Technol., 2019, 35(5): 833-851.
[12]	Guangrong Li, Guanjun Yang. Understanding of degradation-resistant behavior of nanostructured thermal barrier coatings with bimodal structure [J]. J. Mater. Sci. Technol., 2019, 35(3): 231-238.
[13]	Lan-Yue Cui, Guang-Bin Wei, Zhuang-Zhuang Han, Rong-Chang Zeng, Lei Wang, Yu-Hong Zou, Shuo-Qi Li, Dao-Kui Xu, Shao-Kang Guan. In vitro corrosion resistance and antibacterial performance of novel tin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy [J]. J. Mater. Sci. Technol., 2019, 35(3): 254-265.
[14]	Qiaomu Liu, Shunzhou Huang, Aijie He. Composite ceramics thermal barrier coatings of yttria stabilized zirconia for aero-engines [J]. J. Mater. Sci. Technol., 2019, 35(12): 2814-2823.
[15]	Xingfu Wang, Xinfu Wang, Dan Wang, Modi Zhao, Fusheng Han. A novel approach to fabricate Zn coating on Mg foam through a modified thermal evaporation technique [J]. J. Mater. Sci. Technol., 2018, 34(9): 1558-1563.

Fretting Fatigue Improvement of Ti6Al4V by Coating and Shot Peening

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments