Electrophoretic Deposition of Hydroxyapatite Coating

Search for articles:

J Mater Sci Technol ›› 2003, Vol. 19 ›› Issue (01): 30-32.

• Research Articles • Previous Articles Next Articles

Electrophoretic Deposition of Hydroxyapatite Coating

Zude FENG, Qishen SU, Zuochen LI

Department of Materials Science and Engineering, State Key Laboratory for Physical Chemistry of Solid Surfaces, Xiamen University, Xiamen 361005, China...

Received:1900-01-01 Revised:1900-01-01 Online:2003-01-28 Published:2009-10-10
Contact: Zude FENG

Abstract

Abstract: Hydroxyapatite (HAP) coatings were deposited onto titanium substrates by electrophoretic deposition (EPD) from ethanol. The results indicated that the addition of very small amount of HCl resulted in a decrease in the aging time as well as the suspension concentration required to obtain a coating. In addition, the results revealed the existence of a critical saturated voltage (Vsat), which had significant effect on the quality of deposition. The mean interfacial shear strengths of HAP coatings after sintering were found to be greater than 13MPa.

Key words: Hydroxyapatite, Electrophoretic deposition, Titanium

Zude FENG, Qishen SU, Zuochen LI. Electrophoretic Deposition of Hydroxyapatite Coating[J]. J Mater Sci Technol, 2003, 19(01): 30-32.

About JMST

Authors and reviewers

Contact

WeChat

[1]	Yanxin Qiao, Daokui Xu, Shuo Wang, Yingjie Ma, Jian Chen, Yuxin Wang, Huiling Zhou. Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy [J]. J. Mater. Sci. Technol., 2021, 60(0): 168-176.
[2]	Jincheng Wang, Yujing Liu, Chirag Dhirajlal Rabadia, Shun-Xing Liang, Timothy Barry Sercombe, Lai-Chang Zhang. Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture [J]. J. Mater. Sci. Technol., 2021, 61(0): 221-233.
[3]	Zhihong Wu, Hongchao Kou, Nana Chen, Mengqi Zhang, Ke Hua, Jiangkun Fan, Bin Tang, Jinshan Li. Duality of the fatigue behavior and failure mechanism in notched specimens of Ti-7Mo-3Nb-3Cr-3Al alloy [J]. J. Mater. Sci. Technol., 2020, 50(0): 204-214.
[4]	Hao Wu, Yunlei Xu, Zhihao Wang, Zhenhua Liu, Qinggang Li, Jinkai Li, Junyan Wu. The influence of solute atom ordering on the deformation behavior of hexagonal close packed Ti-Al alloys [J]. J. Mater. Sci. Technol., 2020, 52(0): 235-242.
[5]	Wenguang Zhu, Changsheng Tan, Ruoyu Xiao, Qiaoyan Sun, Jun Sun. Slip behavior of Bi-modal structure in a metastable β titanium alloy during tensile deformation [J]. J. Mater. Sci. Technol., 2020, 57(0): 188-196.
[6]	Chao Cai, Xu Wu, Wan Liu, Wei Zhu, Hui Chen, Jasper Chua Dong Qiu, Chen-Nan Sun, Jie Liu, Qingsong Wei, Yusheng Shi. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance [J]. J. Mater. Sci. Technol., 2020, 57(0): 51-64.
[7]	Yu Zhou, Qunbo Fan, Xin Liu, Duoduo Wang, Xinjie Zhu, Kai Chen. Multi-scale crystal plasticity finite element simulations of the microstructural evolution and formation mechanism of adiabatic shear bands in dual-phase Ti20C alloy under complex dynamic loading [J]. J. Mater. Sci. Technol., 2020, 59(0): 138-148.
[8]	Jixin Yang, Yiqiang Chen, Yongjiang Huang, Zhiliang Ning, Baokun Liu, Chao Guo, Jianfei Sun. Hierarchical microstructure of a titanium alloy fabricated by electron beam selective melting [J]. J. Mater. Sci. Technol., 2020, 42(0): 1-9.
[9]	Pengfei Gao, Mingwang Fu, Mei Zhan, Zhenni Lei, Yanxi Li. Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: A review [J]. J. Mater. Sci. Technol., 2020, 39(0): 56-73.
[10]	Minhwan Ko, Sang Yeon Lee, Jucheol Park, Hyungtak Seo. Significant control of metal-insulator transition temperature through catalytic excessive oxygen doping in high-performance vanadium dioxide nanobeam channel [J]. J. Mater. Sci. Technol., 2020, 44(0): 96-101.
[11]	Xuchen Yin, Jianrong Liu, Qingjiang Wang, Lei Wang. Investigation of beta fleck formation in Ti-17 alloy by directional solidification method [J]. J. Mater. Sci. Technol., 2020, 48(0): 36-43.
[12]	Paulina Kazimierczak, Aleksandra Benko, Krzysztof Palka, Cristina Canal, Dorota Kolodynska, Agata Przekora. Novel synthesis method combining a foaming agent with freeze-drying to obtain hybrid highly macroporous bone scaffolds [J]. J. Mater. Sci. Technol., 2020, 43(0): 52-63.
[13]	Xiaochun He, Yang Li, Yongjie Bi, Xiaomei Liu, Bing Zhou, Shangzhou Zhang, Shujun Li. Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting [J]. J. Mater. Sci. Technol., 2020, 44(0): 191-200.
[14]	Taeuk Kim, Seong-Hoon Yi, Sang-Eun Chun. Electrophoretic deposition of a supercapacitor electrode of activated carbon onto an indium-tin-oxide substrate using ethyl cellulose as a binder [J]. J. Mater. Sci. Technol., 2020, 58(0): 188-196.
[15]	Huihong Liu, Yo Aoki, Yasuhiro Aoki, Kohsaku Ushioda, Hidetoshi Fujii. Principle for obtaining high joint quality in dissimilar friction welding of Ti-6Al-4V alloy and SUS316L stainless steel [J]. J. Mater. Sci. Technol., 2020, 46(0): 211-224.

Electrophoretic Deposition of Hydroxyapatite Coating

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments